Stainless Steel Unthreaded Spacers

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Hardness Hardness

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

DFARS Specialty Metals
Compliant

	Tensile Strength Tensile Strength

50,000 to 79,999 psi

80,000 psi or greater

Not Rated

	Finish Finish

Black Oxide

Passivated

	Width Width

	Individual/Set Individual/Set

Individual

Set

	Magnetic Properties Magnetic Properties

Magnetic

May Be Mildly Magnetic

	Shim Stock Form Shim Stock Form


Sheet	Roll

	Slot Width Slot Width

	Overall Height Overall Height

	Tooth Location Tooth Location

	Internal
	External
	Internal/External

Forward

How can we improve?

5,454 Products

Spacers and Standoffs

18-8 Stainless Steel Unthreaded Spacers

18-8 stainless steel spacers have good corrosion resistance.

316 Stainless Steel Unthreaded Spacers

These spacers have excellent corrosion resistance and are passivated for enhanced protection.

Made-to-Order Unthreaded Spacers

Choose the OD, ID, length, and material and we will accommodate your unique spacer needs.

Sanitary Unthreaded Spacers

Create space to clean between components on food processing lines and other sanitary equipment.

Unthreaded Spacers for Angles

The 45° end fits against an angled surface to create a flat surface for connection.

Press-Fit Unthreaded Spacers

Also known as captive spacers, the splines on these bite into a panel for a permanent hold.

Washers

Oversized Washers

Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses for covering oversized holes or for use as spacers and levelers.

Metric Oversized Washers

Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses. Use them to cover oversized holes, hold heavy fastening loads, or as spacers and levelers.

General Purpose Washers

Metric General Purpose Washers

Use these metric washers to evenly distribute the load under bolt or screw heads and nuts when fastening. They can also act as spacers.

Mil. Spec. Washers

Choose these washers for their adherence to strict military standards for material and construction.

SAE Washers

SAE washers generally have a smaller ID and OD than USS washers.

ASME Washers for Soft Material

Also known as Type B washers, these distribute your fastener's load over a larger surface area than other washers to minimize damage to soft materials.

USS Washers

USS washers generally have a larger ID and OD than SAE washers.

Washers for Blind Rivets

Also known as backup washers, these are for use with blind rivets for extra support when fastening into soft material.

Metric Countersunk Washers

Flat and oval head screws sit flush within these metric washers for a neat, finished appearance.

Countersunk Washers

Flat and oval head screws sit flush within these washers for a neat, finished appearance.

Finishing Countersunk Washers

Metric Finishing Countersunk Washers

Square Washers

Square washers fit into slots and channels and have flat sides to keep them from rotating.

Double-Clipped Washers

Clipped on both sides to fit where standard washers can't, these won't rotate when you position the flat edges against a flat surface.

Clipped Washers

Clipped to fit where standard washers can't, these won't rotate when you position the flat edge against a flat surface.

Oversized Clipped Washers

With greater diameters and/or thicknesses than general purpose washers, these washers cover oversized holes or act as spacers and levelers. Clipped to fit where standard washers can’t, they won’t rotate when you position the flat edge against a flat surface.

Easy-Install Slotted Washers

A slot in the side allows you to install and remove these washers without completely disassembling your joint.

Sleeve Washers for Soft Material

Reinforce holes in soft material to keep them from collapsing around screws.

Angled-Edge Washers for
Toggle Clamp Holding Screws

Use on clamps with open arms to keep the holding screw in place.

Lock Washers

Metric Split Lock Washers

Split Lock Washers

As a screw is tightened, these washers flatten to add tension to the joint and prevent loosening from small amounts of vibration.

Mil. Spec. Split Lock Washers

Choose these washers for their adherence to strict military standards for material and construction.

Oversized Split Lock Washers

Compared to standard split lock washers, these are thicker and have larger outside diameters.

Split Lock Washers for Socket Head Screws

Metric Split Lock Washers for Socket Head Screws

Belleville Spring Lock Washers

Also known as conical washers, these have a slightly cupped shape that gives them spring-like flexibility to grip tighter than split and tooth lock washers.

Belleville Spring Lock Washers for Socket Head Screws

These washers have smaller outside diameters than standard spring lock washers to fit neatly under socket head cap screws.

Metric Spring Lock Washers

The arched shape of these washers presses up against a bolt and down against a nut to prevent loosening from wear, vibration, or temperature changes.

Internal-Tooth Lock Washers

Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with fasteners that have small heads, such as fillister and cheese head screws.

Metric Internal-Tooth Lock Washers

Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with metric fasteners that have small heads, such as fillister and cheese head screws.

Mil. Spec. Internal-Tooth Lock Washers

Choose these washers for their adherence to strict military standards for material and construction.

Tight-Grip External-Tooth Lock Washers

The teeth on these washers bite further into the screw head and joint than standard external-tooth washers to provide a stronger hold.

External-Tooth Lock Washers

Teeth on the outside edge of the washer bite into the screw head and joint for a tight grip.

Metric External-Tooth Lock Washers

Teeth on the outside edge of these metric washers bite into the screw head and joint for a tight grip.

Mil. Spec. External-Tooth Lock Washers

Choose these washers for their adherence to strict military standards for material and construction.

Countersunk External-Tooth Lock Washers

The teeth on these washers firmly grip heads of 82° flat head countersunk screws.

Internal-/External-Tooth Lock Washers

The combination of internal and external teeth boosts gripping power to maintain a tight hold and provide more vibration resistance than other tooth lock washers. Use with fasteners that have heads large enough to make contact with the external teeth, such as pan, button, and binding head screws.

Wedge Lock Washers

Comparable to NORD-LOCK® and Sherex TEC Series washers, these two-piece washers provide more locking power than split, tooth, and spring lock washers. Wedges on the inside lock the two pieces together, and serrations on the exterior grip surfaces to resist loosening from high vibration and shifting.

Tab Lock Washers

Bend one tab against the side of the mounting surface and the other tab against the flats on a bolt or nut to prevent both the fastener and washer from turning and loosening in high-vibration applications, such as a motor mount.

Metric Tab Lock Washers

Bend the tab of these metric lock washers against the flats of a hex nut or bolt head to prevent the fastener and washer from turning and loosening due to vibration, wear, or changes in temperature.

Leveling and Wave Washers

Triple-Wave Washers

With three points of surface contact, these washers provide more stability than single-wave washers.

Single-Wave Washers

These curved, flexible washers act like springs to compensate for tolerance variations and uneven surfaces.

Metric Single-Wave Washers

These curved, flexible washers act like springs to compensate for tolerance variations and uneven surfaces.

Leveling Washers

Metric Leveling Washers

Leveling Washers for I-Beams

Metric Leveling Washers for I-Beams

Metal-Bonded Sealing Washers

High-Pressure-Rated Metal-Bonded Sealing Washers

Able to withstand pressure greater than 3,000 psi, these one-piece bonded washers create the tightest seals.

Pressure-Rated Metal-Bonded Sealing Washers

These washers are rated to withstand pressure up to 100 psi.

Metal-Bonded Sealing Washers

Create a stronger seal than metal or rubber alone. These one-piece washers are metal for strength with a bonded rubber seal that creates a tight grip.

Shims

Ring Shims

Precisely align, level, and adjust spacing on fasteners and shafts with these shims.

Ring Shim Sets

Be prepared with ring shims in a variety of thicknesses. These shims fit around fasteners and shafts to precisely align, level, and adjust spacing.

Wide-Rim Ring Shims

Also known as machinery bushings, these shims have an oversized OD to create a larger bearing surface for reduced wear between moving parts.

Tight-Fit Ring Shims

For a snug fit around a shaft, the ID of these shims is held to a tighter tolerance than other round shims.

Peel-Away Layered Ring Shims

These shims are made of layers of metal bonded with adhesive. Remove layers with a utility knife until you get the thickness you need.

Shims for Shortening Screw Shoulders

Slide these shims under the screw head to shorten the shoulder length.

Shims for Lengthening Screw Shoulders

Spin these shims onto screw threads to extend the shoulder length.

Shims for Ball Bearings

Adjust spacing between bearings and other components on shafts. These shims are sized to fit the outer rim of a bearing.

Shims for Ball Bearing Housings

Also called tolerance rings, these rings are for use in stamped, molded, or worn housings to form a tight hold on the bearings.

Shims for Button Dies

Place these shims under sharpened dies to restore their original height and extend their life.

Shims for Keyed Shafts

Precisely shaped to fit snugly on keyed shafts, these shims align, level, and space components. Because of their tight fit, they also help components rotate in unison with the shaft.

Disc Shims

Use these round shims as they are, or punch out the middle to create the ID you need.

Slotted Shims

The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

Slotted Shim Sets

Be prepared with slotted shims in a variety of thicknesses. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

Horseshoe Shims

Align cabinets, doors, and windows with these shims. The horseshoe design fits around screws.

Shim Tape

Level dies, plates, presses, and other machine tools—this shim tape conforms to curves and uneven surfaces.

Adhesive-Back Shim Stock

A durable acrylic adhesive keeps this shim stock from sliding out of place. Cut it into custom shapes to fit your application.

Shim Stock Sets

Keep shim stock in a variety of thicknesses on hand with these sets. Cut into custom shapes to fit your application.

Shim Stock

Cut this stock into custom shapes to fit your application.

Peel-Away Layered Shim Stock

Cut this shim stock into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need.

Made-to-Order Peel-Away Layered Shims

Send us a drawing, and we'll cut your custom shim. Shims are made of layers of metal bonded with adhesive; remove layers with a utility knife until you get the thickness you need.

Made-to-Order Shims

Send us a drawing, and we'll cut your custom shim.

Fastener Assortments

Shim Stock Assortments

Create a custom shim to fit your application.

Washer Assortments

SAE Washer Assortments

SAE washers generally have a smaller ID and OD than USS washers.

Split Lock Washer Assortments

As a screw is tightened, these washers flatten to add tension to the joint and prevent loosening from small amounts of vibration.

Corrosion-Resistant Press-Fit Drill Bushings

These bushings are made of stainless steel, which provides excellent corrosion resistance.

Spacers and Standoffs

18-8 Stainless Steel Unthreaded Spacers

316 Stainless Steel Unthreaded Spacers

Made-to-Order Unthreaded Spacers

Sanitary Unthreaded Spacers

Unthreaded Spacers for Angles

Press-Fit Unthreaded Spacers

Washers

Oversized Washers

Metric Oversized Washers

General Purpose Washers

Metric General Purpose Washers

Mil. Spec. Washers

SAE Washers

ASME Washers for Soft Material

USS Washers

Washers for Blind Rivets

Metric Countersunk Washers

Countersunk Washers

Finishing Countersunk Washers

Metric Finishing Countersunk Washers

Square Washers

Double-Clipped Washers

Clipped Washers

Oversized Clipped Washers

Easy-Install Slotted Washers

Sleeve Washers for Soft Material

Angled-Edge Washers forToggle Clamp Holding Screws

Lock Washers

Metric Split Lock Washers

Split Lock Washers

Mil. Spec. Split Lock Washers

Oversized Split Lock Washers

Split Lock Washers for Socket Head Screws

Metric Split Lock Washers for Socket Head Screws

Belleville Spring Lock Washers

Belleville Spring Lock Washers for Socket Head Screws

Metric Spring Lock Washers

Internal-Tooth Lock Washers

Metric Internal-Tooth Lock Washers

Mil. Spec. Internal-Tooth Lock Washers

Tight-Grip External-Tooth Lock Washers

External-Tooth Lock Washers

Metric External-Tooth Lock Washers

Mil. Spec. External-Tooth Lock Washers

Countersunk External-Tooth Lock Washers

Internal-/External-Tooth Lock Washers

Wedge Lock Washers

Tab Lock Washers

Metric Tab Lock Washers

Leveling and Wave Washers

Triple-Wave Washers

Single-Wave Washers

Metric Single-Wave Washers

Leveling Washers

Metric Leveling Washers

Leveling Washers for I-Beams

Metric Leveling Washers for I-Beams

Metal-Bonded Sealing Washers

High-Pressure-Rated Metal-Bonded Sealing Washers

Pressure-Rated Metal-Bonded Sealing Washers

Metal-Bonded Sealing Washers

Shims

Ring Shims

Ring Shim Sets

Wide-Rim Ring Shims

Tight-Fit Ring Shims

Peel-Away Layered Ring Shims

Shims for Shortening Screw Shoulders

Shims for Lengthening Screw Shoulders

Shims for Ball Bearings

Shims for Ball Bearing Housings

Shims for Button Dies

Shims for Keyed Shafts

Disc Shims

Slotted Shims

Slotted Shim Sets

Horseshoe Shims

Shim Tape

Adhesive-Back Shim Stock

Angled-Edge Washers for
Toggle Clamp Holding Screws