A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

Use these bearings where high speed and precision are not required.

With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.

For use on tapered shafts and round shafts with adapter sleeves, these ball-bearings have a spherical raceway to compensate for shaft misalignment.

Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction.

Bearings are 440C stainless steel for good corrosion resistance.

Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.

These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.

With two rows of balls, these lightweight bearings have greater durability and load capacity—and a wider profile—than single-row plastic bearings.

The flange ensures proper positioning inside a tube or housing.

Flanged and creating twice as many contact points as angular-contact ball bearings, these bearings ensure correct positioning within a tube or housing and resist radial loads.

When speed and accuracy matter most, opt for these bearings. They’re made to tighter tolerances than standard flanged ball bearings.

Made with either PEEK or graphite, these ball bearings work in applications that are too hot for most other ball bearings.

Secure these bearings in washdown areas, such as food, beverage, pharmaceutical, and chemical plants, by tightening the set screw onto a shaft—no additional collar needed.

Designed to stand up to frequent washdowns, you can quickly secure these ball bearings onto shafts with the clamp-on collar in food, beverage, pharmaceutical, and chemical plants. The collar centers your shafts and secures them better than set screw ball bearings, which reduces vibration and noise.

These bearings have twice as many contact points as angular-contact ball bearings.

A combination of stainless steel and nylon components provide increased corrosion resistance over standard thrust ball bearings.

Use these bearings as miniature high-precision turntables. They have a unique design that allows your shaft to sit on top of the bearing rather than being inserted through it.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication.

Synthetic grease or graphite enables these bearings to operate in high temperatures.

Use these bearings in corrosive environments and under water.

Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.

These bearings have the highest speed ratings of any mounted ball bearing in our offering.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with four-bolt flange.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Use these bearings for light loads and small shafts. The closed backing blocks out dust and other contaminants.

Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting.

Permanently lubricated and IP69K certified for washdown environments, these mounted ball bearings are useful for hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. Mount them using their two-bolt flange.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with two-bolt flange.

Rated IP69K for washdowns, these bearings stand up to frequent cleanings in food, beverage, pharmaceutical, and chemical plants.

These rollers are rated to handle radial and thrust (top and side) loads simultaneously.

These rollers are rated to handle radial and thrust (top and side) loads simultaneously.

Thread the stud directly into a component or secure with a nut for through-hole mounting.

Support and guide loads on angle rails in food, pharmaceutical, and other sanitary environments. Also known as yoke-style cam followers, these track rollers offer more mounting flexibility than threaded alternatives and are typically mounted on shafts and clevis rod ends.

Thread the stud directly into a component or secure with a nut for through-hole mounting.

Use these bearings to replace worn and damaged bearings or press-fit them into tubing or pipe to create a roller. All have a hex-shaped axle.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings.

Engineered for simultaneous linear and rotary motion, these bearings are used with round end-supported shafts.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings for support rail shafts.

Combine these bearings with a ball spline to create a compact linear and rotary motion system for applications with fast, complex movements, such as robotics.

The shell, housing, and balls of these bearings are stainless steel for excellent corrosion resistance.

Designed to handle heavy loads, these bearings have the highest load capacities of any mounted linear ball bearings we offer.

Use the adjustment screw in the housing to tighten or loosen the snugness (also known as preload) of the bearing to your shaft.

Mount these bearings on a support rail shaft for applications requiring maximum rigidity.

A flange with mounting holes makes it easy to attach a load to these bearings. Create a compact linear and rotary motion system for robots and other applications requiring complex, fast movements, by combining them with ball splines.

Good for use in pick-and-place applications, machine tool doors, and telescopic press arms, these rugged slides are designed to carry heavy loads.

Nylon rollers and aluminum rails make these good for light duty applications.

These tiny carriages and guide rails are sized for electronic and other precision applications.