Weld these nuts into tube ends to attach threaded fittings such as rod ends. The welded connection is stronger than tapping a tube directly. These nuts are often used to link control arms and suspensions. Also known as tube adapters and weldable threaded tube ends.

With four symmetrical projections, these nuts create the strongest hold in our offering. Unlike rectangular weld nuts, each projection is equidistant from the threads, so welds wrap evenly for extra strength and twist resistance. Projections concentrate heat away from the threads to prevent them from deforming and create consistent welds. All nuts have a collar pilot that guides them into the hole, holds them in place while welding, and protects the threads from weld spatter.

Add permanent threads to thin metal with our go-to weld nuts. Unlike press-fit and rivet nuts, these nuts fuse to the base metal, so they won’t twist and pull out. Three evenly spaced projections concentrate heat away from the threads to prevent them from deforming and create consistent welds. All have a collar pilot that guides the nut into the hole, holds it in place while welding, and protects the threads from weld spatter. You can also install them on thick pieces of metal.

These weld nuts prevent fasteners from backing out of assemblies that rotate counterclockwise. Their left-hand threads pair with left-hand screws and rods to stop the fastener from loosening as the assembly turns. Weld them to the end of a tube for a stronger connection than tapping the tube directly. Also known as tube adapters and weldable threaded tube ends.