Bolt On Stands | McMaster-Carr

Filter by

Mount Type

For Robot Arm Manufacturer

For Robot Arm Manufacturer Series

Vise Type

System of Measurement

Overall Height

Component

Robot Cell Component

Mounting Location

For Robot Arm Manufacturer Model Number

Number of Mounting Holes

Mounting Plate Shape

Jaw Width

Overall Length

Mounting Hole Diameter

DFARS Compliance

RoHS Compliance

Material

Base Type

Jaw Texture

Color

REACH Compliance

Finish

Forward

How can we improve?

383 Products

Create-Your-Own Workholders

Build a custom clamping system for holding lightweight objects such as beakers and laboratory equipment.

Bench Vises

Tilting-Head Bench Vises

The head tilts and locks in place to hold work at an angle.

Any-Angle Tilting-Head Bench Vises

Two vise heads tilt and rotate 360°, locking in place to hold work at any angle.

Rotating-Head Bench Vises

Rotate the head 360° to use three different vise jaws and lock workpieces in position at 45° intervals.

Heavy Duty Bench Vises

For big jobs, these vises have a wider jaw opening, deeper throat depth, and larger footprint than standard vises.

Bench Vises

Use these vises for general purpose workholding.

Weather-Resistant Bench Vises

Designed for outdoor use, these vises have a finish that resists corrosion.

High-Visibility Bench Vises

A bright yellow vise body stands out on the shop floor.

Miniature Bench Vises

Hold tiny workpieces in these compact vises.

Stainless Steel Bench Vises
for Washdown Applications

Made of 304 stainless steel to stand up to washdown environments, such as food and beverage production, these are the most corrosion-resistant vises we offer.

Extra-Wide-Opening Bench Vises

The movable jaw can be repositioned to extend the jaw opening. Pull out the entire sliding section and insert it on the opposite side of the vise.

Clamp-On Bench Vises

Quickly install and remove the clamp-on base from a benchtop.

Miniature Clamp-On Bench Vises

Hold your smallest workpieces in these vises, which have a clamp-on base for quick installation and removal from a benchtop.

Undermount Bench Vises

Also known as woodworkers' vises, these mount to the underside of your workbench and sit flush with the surface.

Machine Vises

Swivel Bases for Kurt® Milling-Machine Vises

Mount to a machine table to rotate a vise 360° in 1° increments.

Milling-Machine Vises

Use these vises for reliable workholding on CNC machines.

High-Precision Milling-Machine Vises

The vise body and stationary jaw are one piece for high repeatability, even under heavy clamping loads. Ground flat on the base and three sides, these vises ensure accuracy whether mounted on the base, either side, or upright.

Compact Milling-Machine Vises

The small size allows multiple vises to be mounted on a single machine table. Frequently used in 4- and 5-axis milling machines, these vises have stepped jaws with serrated teeth that firmly grip just a small portion of your workpiece.

Air-Powered Machine Vises

Compressed air controlled by a foot pedal allows hands‐free operation. Use these vises in production applications with frequent insertion and removal of workpieces.

Any-Angle Machine Vises

Tilt the head on two axes and rotate the base to position your workpiece at almost any angle.

Self-Centering Machine Vises

The jaws move inward at the same time to consistently position your workpiece in the center of the vise.

Machine Vises

Reliably hold workpieces with these basic machine vises.

Cross-Slide Drill-Press Vises

Use the adjustment dials to ensure your work is accurately positioned on X and Y axes.

Drill-Press Vises

Turn the handle to move the jaw on these basic vises.

High-Precision Cross-Slide Drill-Press Vises

The dials on these vises are graduated in smaller increments than standard cross‐slide drill‐press vises for finer adjustment. Use to precisely position work on X and Y axes.

Quick-Clamp Drill-Press Vises

Push the handle to slide the jaw into place for quicker setup than standard drill-press vises.

Pivoting-Head Drill-Press Vises

Tilt and lock the vise to hold work at any angle up to 90°.

Ultra-Precision Machine Vises

Designed for precision grinding and inspection, the construction of these vises ensures workpieces are held perfectly square. They are also known as toolmakers’ vises.

Circuit Board Vises

A wide opening, large throat depth, and grooved jaws accommodate circuit boards and other flat objects.

Bench-Mount Pipe Vises

Steel jaws secure round workpieces such as pipe, tubing, and conduit.

Nonmarring Bench-Mount Pipe Vises

The jaws are rubber coated to prevent damage to pipe and other round workpieces.

Trailer-Hitch Vises

Secure these heavy duty vises to the back of a truck to clamp at your job site.

Sine Vises

Lift the end of these sine vises by placing gauge blocks underneath—they hold tools and workpieces at precise angles for grinding, cutting, and inspecting.

Fixture Plates, Angles, and Tables

Part Presentation Stands

Position parts exactly where they’re needed for workers, robots, and other machines to easily access them.

Fine-Adjust Cross-Slide Tables

Precisely position work on X- and Y-axes using the handles.

Fine-Adjust Rotary Cross-Slide Tables

Rotate work 360° and precisely position it on X- and Y-axes by turning the handles.

Fine-Adjust Rotary Tables

Rotate your work 360°. These tables can be mounted horizontally or vertically.

Electric Welding Positioners

Mount a workpiece on these motorized turntables for smooth and continuous 360° rotary motion useful for creating circular welds. Turntables tilt and lock in place at angles up to 90° in 15° increments.

Lifting and Pulling

Leveling Jacks

Mount these jacks to equipment to raise and level it.

Leveling Jacks with Wheel

A swivel caster lets you reposition your load.

Robot-Ready Electric Vacuum Lifters

Connect these lifters to your robot arm to pick up and move items using suction. They're electric, so you don't need a compressed air source.

Robot Bases

Elevate robot arms with these bases so they can reach onto raised surfaces, such as conveyor belts or workstations.

Mounts for Robot Controllers

Use these mounts with robot bases to secure your controller near your robot arm for easy access and to cut down on cord lengths.

Robot Workstations

These stations are a portable working home for your robot arm.

Telescoping Robot Workstations

Raise and lower your robot arm on these workstations, placing them at the right height for each task.

Robot Tool Mounts

Robot Tool Accessory Mounts

Attach accessories alongside primary tools on robot arms. These mounts are commonly used to connect air nozzles to remove debris, cameras to document work, and sensors to track forces.

Robot Tool Extensions

Extend the reach of your robot arm, so it can access the full width of a conveyor or the bottom of deep containers.

Robot Tool Mounts

Connect robot tools to robot arms that have different ISO mounting patterns.

Quick-Connect Robot Tool Changers

Switch out your end-of-arm tools quickly and easily with these tool changers.

Robot Vacuum Cup Mounts

Attach threaded vacuum cups to robot arms with different ISO mounting patterns.

Robot Tool Mounts for Compensation Devices

Join compensation devices to robot arms with different ISO mounting hole patterns.

Mounts for Two Robot Tools

Equip your robot arm with two tools at once—these mounts have two offset, angled mounting surfaces for tools.

Robot Tool Mounts for T-Slotted Framing

Connect your robot arm to tools or extensions made from T-slotted framing.

Automatic Robot Tool Changers

No need to manually latch and unlatch end-of-arm tools, these tool changers will quickly and seamlessly swap them out for you. While manual tool changers are good for switching tools in between two different work cycles, these automatic tool changers are best for making multiple changes in a single work cycle.

Robot Base Mounts

Secure your robot arm to benches, frames, or other surfaces with these base mounts.

Mounts for Robot Teach Pendants

Store your robot teach pendant conveniently near your robot but out of harm’s way.