We will reply to your message within an hour.
Strong and durable, these multipurpose bits are often used with power tools to install sheet metal screws.
The toughest bits available, these withstand the shock and twisting force of impact drivers.
Less likely to crack or shatter under high torque than standard bits, these are often used with power tools to install machine screws.
When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas.
The slightly tapered tip wedges into the screw recess for a secure hold. Also known as Torx-Align bits.
Protect your stainless steel screws by using a stainless steel bit. If steel flakes off a standard bit and into the recess, it can lead to rust and contamination. These bits eliminate that risk.
Bits have a different size at each end.
Strong and durable, these multipurpose bits are for use with bit screwdrivers. They are often used with power tools to install sheet metal screws.
Ribs forged into the wings of these bits grip the screw recess to reduce stripping. They're also known as ACR® bits.
The small-diameter shaft can access screws in narrow recessed holes.
A wide tip makes good contact in shallow and coated screw recesses, such as those filled with paint.
Drive screws with both ends of these bits. Use with hand drivers.
Remove screws in hard-to-reach places. A spring-loaded sleeve guides bits onto the screw head and keeps them from slipping out.
Thread these bits directly into your driving tool for minimal wobble in assembly applications.
An exterior stop collar prevents fasteners from being driven too deep. Use with soft material such as drywall, wood, and fiberboard.
An opening at the tip accommodates the pin in the recess of tamper-resistant Torx screws. These are also known as pin-in-Torx bits.
Bits have a different size at each end. An opening at the tips accommodates the pin in the recess of tamper-resistant Torx screws. These are also known as pin-in-Torx bits.
The six rounded points fit the star-shaped recess of Torx-Plus screws. These bits have a similar profile to Torx but are not recommended for use with standard Torx screws.
An opening at the tip accommodates the pin in the recess of tamper-resistant pentalobe and tamper-resistant Torx Plus screws.
These bits provide a secure grip on the Phillips/slotted combination-drive screws in electrical equipment.
The tip is shaped like an eight-pointed star.
Turn two drive styles with one reversible bit. Remove and replace to change the tip.
While screws with a Square/Phillips combination drive can be turned with either a Square or Phillips bit, these make the best contact so you can apply high torque without slipping and stripping the recess. They are also known as Quadrex bits.
Turn the screws found in Apple devices.
An opening at the tip accommodates the pin in the recess of tamper-resistant Phillips screws. These are also known as pin-in-head Phillips bits.
Assortments contain bits with multiple drive styles.
The knurled shank on these bits allows finger tightening. They can also be used with the included screwdriver.
The slightly tapered tip wedges into the screw recess for a secure hold. These are also known as Torx-Align bits.
Turn fasteners from either end and reach into tight spots.
Sets include an assortment of keys. These simple tools turn fasteners from either end and reach into tight spots.
These assorted keys have a ball end that allows angled entry to make good contact with the screw recess when standard-tip keys can’t. Use to turn screws in hard-to-reach spots.
When a standard-tip key can't make good contact with the recess, a ball end allows angled entry to turn screws in hard-to-reach places.
These assorted keys have a bright finish that's easy to see, so they’re less likely to be misplaced. They turn fasteners from either end and reach into tight spots.
A retaining ring at the tip grips inside the recess to ensure screws won’t fall off.
These assorted keys have a retaining ring at the tip that grips inside the recess to ensure screws won’t fall off.
These plastic organizers store keys in slots marked with the size.
A ratchet mechanism allows you to drive fasteners when there's little space to move the handle.
A ratchet mechanism turns fasteners more quickly than a standard bit driver. Insert a bit into the shaft and a magnet holds it in place.
Drive screws four times faster than ratcheting alone. Grip the speed housing at the base of the shaft with one hand while turning the handle with the other. A magnet at the end of the shaft holds bits in place.
Insert a bit into the shaft and a magnet holds it in place.
Operate these tools like a standard bit driver and access hard-reach fasteners with the offset head. Insert a bit and a magnet holds it in place.
Lock the bit into the chuck to prevent accidental disengagement.
An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet EN 60900 and IEC 60900.
LEDs light the tip so you can use these tools in dark areas.
Bits have a different tip at each end and snap into the shaft, which is also a nutdriver.
When working in tight spaces, these short drivers fit where others can't. Bits have a different tip at each end and snap into the shaft, which is also a nutdriver.
An insulated handle and shafts protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC 60900.
These sets include an adjustable torque driver, bits for different drive styles, and a socket adapter.
Set includes a handle and six shafts. Remove and replace the shaft to use a different size or drive style.
Choose a handle based on torque and change shafts to use a different size or drive style. Factory-set screwdrivers ensure you reach the same torque every time.
The T-handle provides a good grip for your whole hand and the long shaft reaches into tight spots.
Sets include assorted keys with long shafts that reach into tight spots. The plastic-covered handles provide a good grip for your whole hand.
Use the long shaft for more reach and the short shaft for more torque when turning fasteners.
The assorted keys in these sets have a long shaft for more reach and a short shaft for more torque when turning fasteners.
Often used to install carbide inserts in cutting tools, these keys have a small T-handle that prevents you from generating too much torque when turning a fastener.
The assorted keys in these sets have a small T-handle that prevents you from generating too much torque when turning a fastener. They are often used to install carbide inserts in cutting tools.
A retaining ring on the tip grips inside the recess to hold screws in place. Often used to install carbide inserts in cutting tools, these keys have a small T-handle that prevents you from generating too much torque when turning a fastener.
These assorted keys have a retaining ring on the tip that grips inside the recess to hold screws in place. Often used to install carbide inserts in cutting tools, these keys have a small T-handle that prevents you from generating too much torque when turning a fastener.
Each slot is marked with the size. Set these organizers on a bench top or wall mount.
Sets include an assortment of drivers with a tip that can be replaced when it becomes worn. Press the rotating end cap on the handle with your palm to apply constant pressure to small fasteners while turning the body of the screwdriver with your fingertips.
Use these ceramic-tipped screwdrivers for adjusting sensitive electronic components such as capacitors and resistors. They're completely nonconductive and nonmagnetic so there's no risk of short-circuiting or creating magnetic interference. Remove and replace the shafts to use a different size or drive style.
Keep a set of keys neatly in your tool box or pocket to turn multiple fastener sizes.
Extra-long bits allow access to hard-to-reach fasteners.
These sockets are also known as pin-in-Torx bits.
Designed to fit on external Torx-Plus fasteners, often found on pickup trucks, these sockets have squared lobes that resist slipping at high torque.
Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.
With squared lobes that won’t slip at high torque, all of the sockets in these sets are designed to fit on external Torx-Plus fasteners, often found on pickup trucks.
These sockets are made to withstand the high torque and force of impact tools.
Drill, countersink, and drive screws without switching three separate bits in and out of your power tool.