Hinge leaves fit into two cutouts (mortises) to mount flush with the door and frame.

Made of plastic with a metal additive, these hinges will set off metal detectors if a piece breaks off and falls into your line.

Turn a set screw to adjust the door up or down after it's hung.

Turn a set screw to adjust the door 1/8" up or down after it's hung.

Thick leaves and a large diameter pin make these hinges good for use with heavy doors.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

The hinge pin is attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin.

A grease fitting makes these hinges easy to lubricate.

These hinges without holes are spring loaded—pull the handle to retract the pin and disconnect a door; release the handle and the pin snaps back.

A keeper holds the pin in a retracted position to make reconnecting doors easier than other pull-release quick-disconnect hinges.

To retract the pin and disconnect a door, squeeze the hinge handles together. Release the handles and the pin snaps back.

Springs in these hinges without holes automatically swing doors and gates closed behind you.

After a light push on the door, springs in these hinges swing doors and gates fully open.

Tighten or loosen an adjustment screw to change the hinge resistance.

These hinges allow 360° of motion.

A stop keeps these hinges open at a set angle; push past the stop to open them to 180°.

Bearings allow these hinges to open and close doors smoothly. The mounting holes form an industry-standard half-moon shape.

No need for oil or grease, these hinges are maintenance free. The mounting holes form an industry-standard half-moon shape.

Only one cutout (mortise) is needed to mount these hinges—the offset design allows surface mounting the door leaf and mortise mounting the frame leaf.

The mounting holes form an industry-standard half-moon shape.

The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin.

The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin.

Designed to wrap around the edge of the partition frame, these hinges provide a stronger hold than other toilet partition door hinges.

When the cabinet door is closed, a portion of the frame leaf is exposed and the entire door leaf is hidden

Surface-mount these hinges to the side of a cabinet.