Filter by
DFARS Compliance
About Hinges
More
Full-Length Entry Door Hinges
Longer than other entry door hinges, these piano-style hinges run the entire length of doors for strength and durability. Bearings allow the hinges to open and close doors smoothly. All hinges have a nonremovable pin to deter tampering. Capacity is based on a maximum door size of 4' Wd. × 7' Ht. Cut hinges to size with a hacksaw. These hinges are UL Listed for use with labeled fire doors.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Capacity, lbs. | Pin Dia. | Pin Material | Specifications Met | Mounting Fasteners Included | Each | |
Zinc-Plated Low-Carbon Steel—Dull | |||||||||||||
| 83" | 1 11/16" | 83" | 2 5/16" | 4" | 0.075" | 180° | 600 | 3/16" | Steel | UL Listed, ANSI A156.26 Grade 1 | Yes | 00000000 | 0000000 |
Piano Hinges without Holes
Longer than other hinges, piano hinges run the entire length of doors and lids for strength and durability. These hinges have a standard clearance—when they are closed, the distance between the leaves is about the same as the pin diameter.
Zinc-plated low-carbon steel and brass hinges have mild corrosion resistance.
Note: Prices are 15% to 20% lower when you buy 10 or more hinges of the same size.
For technical drawings and 3-D models, click on a part number.
Low-Carbon Steel—Dull
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | 1 ft. | 2 ft. | 3 ft. | 4 ft. | 5 ft. | 6 ft. | 7 ft. | 8 ft. | |
0.025" Leaf Thick. | ||||||||||||||
| 3/4" | 1/16" | Steel | 1/4" | 0.113" | 270° | 000000000 | ||||||||
| 3/4" | 1/16" | Brass | 1/4" | 0.113" | 270° | 00000000 | ||||||||
| 1" | 1/16" | Steel | 1/4" | 0.113" | 270° | 000000000 | ||||||||
| 1" | 1/16" | Brass | 1/4" | 0.113" | 270° | 00000000 | ||||||||
0.035" Leaf Thick. | ||||||||||||||
| 3/4" | 5/64" | Steel | 1/4" | 0.148" | 270° | 000000000 | ||||||||
| 1 1/16" | 5/64" | Steel | 1/4" | 0.148" | 270° | 000000000 | ||||||||
| 1 1/4" | 5/64" | Steel | 1/4" | 0.148" | 270° | 000000000 | ||||||||
| 1 1/2" | 5/64" | Steel | 1/4" | 0.148" | 270° | 000000000 | ||||||||
0.04" Leaf Thick. | ||||||||||||||
| 1 1/16" | 3/32" | Steel | 1/2" | 0.174" | 270° | 000000000 | ||||||||
| 1 1/4" | 3/32" | Steel | 1/2" | 0.174" | 270° | 000000000 | ||||||||
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | 000000000 | ||||||||
| 1 1/2" | 3/32" | Brass | 1/2" | 0.174" | 270° | 00000000 | ||||||||
| 2" | 3/32" | Steel | 1/2" | 0.174" | 270° | 000000000 | ||||||||
| 2" | 3/32" | Brass | 1/2" | 0.174" | 270° | 00000000 | ||||||||
0.05" Leaf Thick. | ||||||||||||||
| 1 1/16" | 1/8" | Steel | 1/2" | 0.225" | 270° | 000000000 | ||||||||
| 1 1/4" | 1/8" | Steel | 1/2" | 0.225" | 270° | 000000000 | ||||||||
| 1 1/2" | 1/8" | Steel | 1/2" | 0.225" | 270° | 000000000 | ||||||||
| 2" | 1/8" | Steel | 1/2" | 0.225" | 270° | 000000000 | ||||||||
0.06" Leaf Thick. | ||||||||||||||
| 1 1/16" | 1/8" | Steel | 1/2" | 0.245" | 270° | 000000000 | ||||||||
| 1 1/4" | 1/8" | Steel | 1/2" | 0.245" | 270° | 000000000 | ||||||||
| 1 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | 000000000 | ||||||||
| 1 1/2" | 1/8" | Brass | 1/2" | 0.245" | 270° | 00000000 | ||||||||
| 1 1/2" | 3/16" | Steel | 1/2" | 0.308" | 270° | 000000000 | ||||||||
| 1 1/2" | 3/16" | Steel | 1" | 0.308" | 270° | 000000000 | ||||||||
| 1 3/4" | 1/8" | Steel | 1/2" | 0.245" | 270° | 000000000 | ||||||||
| 2" | 1/8" | Steel | 1/2" | 0.245" | 270° | 000000000 | ||||||||
| 2" | 1/8" | Brass | 1/2" | 0.245" | 270° | 00000000 | ||||||||
| 2" | 3/16" | Steel | 1/2" | 0.308" | 270° | 000000000 | ||||||||
| 2" | 3/16" | Steel | 1" | 0.308" | 270° | 000000000 | ||||||||
| 2 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | 000000000 | ||||||||
| 2 1/2" | 3/16" | Steel | 1/2" | 0.308" | 270° | 000000000 | ||||||||
| 2 1/2" | 3/16" | Steel | 1" | 0.308" | 270° | 000000000 | ||||||||
| 3" | 1/8" | Steel | 1/2" | 0.245" | 270° | 000000000 | ||||||||
| 3" | 1/8" | Brass | 1/2" | 0.245" | 270° | 00000000 | ||||||||
| 3" | 3/16" | Steel | 1/2" | 0.308" | 270° | 000000000 | ||||||||
| 4" | 1/8" | Steel | 1/2" | 0.245" | 270° | 000000000 | ||||||||
| 4" | 3/16" | Steel | 1/2" | 0.308" | 270° | 000000000 | ||||||||
0.072" Leaf Thick. | ||||||||||||||
| 1 1/2" | 1/4" | Steel | 1" | 0.394" | 270° | 000000000 | ||||||||
| 2" | 1/4" | Steel | 1" | 0.394" | 270° | 000000000 | ||||||||
| 2 1/2" | 1/4" | Steel | 1" | 0.394" | 270° | 000000000 | ||||||||
| 3" | 1/4" | Steel | 1" | 0.394" | 270° | 000000000 | ||||||||
| 3 1/2" | 1/4" | Steel | 1" | 0.394" | 270° | 000000000 | ||||||||
| 4" | 1/4" | Steel | 1" | 0.394" | 270° | 000000000 | ||||||||
0.075" Leaf Thick. | ||||||||||||||
| 1 1/2" | 3/16" | Steel | 1" | 0.338" | 270° | 000000000 | ||||||||
| 1 1/2" | 1/4" | Brass | 1" | 0.400" | 270° | 00000000 | ||||||||
| 2" | 3/16" | Steel | 1" | 0.338" | 270° | 000000000 | ||||||||
| 2" | 1/4" | Brass | 1" | 0.400" | 270° | 00000000 | ||||||||
| 2 1/2" | 3/16" | Steel | 1" | 0.338" | 270° | 000000000 | ||||||||
| 3" | 3/16" | Steel | 1" | 0.338" | 270° | 000000000 | ||||||||
| 3" | 1/4" | Brass | 1" | 0.400" | 270° | 00000000 | ||||||||
| 4" | 3/16" | Steel | 1" | 0.338" | 270° | 000000000 | ||||||||
0.09" Leaf Thick. | ||||||||||||||
| 2" | 1/4" | Steel | 1" | 0.430" | 270° | 000000000 | ||||||||
| 2" | 1/4" | Brass | 1" | 0.430" | 270° | 00000000 | ||||||||
| 3" | 1/4" | Steel | 1" | 0.430" | 270° | 000000000 | ||||||||
| 3" | 1/4" | Brass | 1" | 0.430" | 270° | 00000000 | ||||||||
| 4" | 1/4" | Steel | 1" | 0.430" | 270° | 000000000 | ||||||||
| 4" | 1/4" | Brass | 1" | 0.430" | 270° | 00000000 | ||||||||
| 5" | 1/4" | Steel | 1" | 0.430" | 270° | 000000000 | ||||||||
0.12" Leaf Thick. | ||||||||||||||
| 2" | 1/4" | Steel | 2" | 0.490" | 270° | 000000000 | ||||||||
| 2" | 3/8" | Steel | 2" | 0.615" | 270° | 000000000 | ||||||||
| 2 1/2" | 3/8" | Steel | 2" | 0.615" | 270° | 000000000 | ||||||||
| 3" | 1/4" | Steel | 2" | 0.490" | 270° | 000000000 | ||||||||
| 3" | 3/8" | Steel | 2" | 0.615" | 270° | 000000000 | ||||||||
| 3" | 1/2" | Steel | 2" | 0.740" | 270° | 000000000 | ||||||||
| 3 1/2" | 3/8" | Steel | 2" | 0.615" | 270° | 000000000 | ||||||||
| 4" | 3/8" | Steel | 2" | 0.615" | 270° | 000000000 | ||||||||
| 5" | 3/8" | Steel | 2" | 0.615" | 270° | 000000000 | ||||||||
| 6" | 3/8" | Steel | 2" | 0.615" | 270° | 000000000 | ||||||||
0.18" Leaf Thick. | ||||||||||||||
| 3" | 1/2" | Steel | 2" | 0.860" | 270° | 000000000 | ||||||||
| 4" | 1/2" | Steel | 2" | 0.860" | 270° | 000000000 | ||||||||
| 5" | 1/2" | Steel | 2" | 0.860" | 270° | 000000000 | ||||||||
| 6" | 1/2" | Steel | 2" | 0.860" | 270° | 000000000 | ||||||||
1/4" Leaf Thick. | ||||||||||||||
| 3" | 5/8" | Steel | 1 1/2" | 1.125" | 270° | 000000000 | ||||||||
| 4" | 5/8" | Steel | 1 1/2" | 1.125" | 270° | 000000000 | ||||||||
| 5" | 5/8" | Steel | 1 1/2" | 1.125" | 270° | 000000000 | ||||||||
| 6" | 5/8" | Steel | 1 1/2" | 1.125" | 270° | 000000000 | ||||||||
Zinc-Plated Low-Carbon Steel—Dull
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | 1 ft. | 3 ft. | 4 ft. | 6 ft. | 8 ft. | |
0.025" Leaf Thick. | |||||||||||
| 3/4" | 1/16" | Steel | 1/4" | 0.125" | 270° | 00000000 | |||||
| 1" | 1/16" | Steel | 1/4" | 0.125" | 270° | 00000000 | |||||
0.042" Leaf Thick. | |||||||||||
| 1 1/2" | 3/32" | Steel | 1/2" | 0.178" | 270° | 00000000 | |||||
| 2" | 3/32" | Steel | 1/2" | 0.178" | 270° | 00000000 | |||||
0.062" Leaf Thick. | |||||||||||
| 1 1/2" | 1/8" | Steel | 1/2" | 0.249" | 270° | 00000000 | |||||
| 2" | 1/8" | Steel | 1/2" | 0.249" | 270° | 00000000 | |||||
| 3" | 1/8" | Steel | 1/2" | 0.249" | 270° | 00000000 | |||||
0.09" Leaf Thick. | |||||||||||
| 2" | 1/4" | Steel | 1" | 0.450" | 270° | 00000000 | |||||
| 3" | 1/4" | Steel | 1" | 0.450" | 270° | 00000000 | |||||
Piano Hinges with Holes
Longer than other hinges, piano hinges run the entire length of doors and lids for strength and durability. These hinges have a standard clearance—when they are closed, the distance between the leaves is about the same as the pin diameter.
Brass as well as zinc-, brass-, bronze-, chrome-, and nickel-plated low-carbon steel hinges have better corrosion resistance than painted and primed low-carbon steel.
For technical drawings and 3-D models, click on a part number.
Low-Carbon Steel—Dull
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size  | For Mounting Screw Countersink Angle | 1 ft. | 3 ft. | 4 ft. | 6 ft. | 8 ft. | |
0.025" Leaf Thick. | ||||||||||||||
| 3/4" | 1/16" | Steel | 1/4" | 0.113" | 270° | No | No. 3 | 82° | 0000000 | |||||
| 1" | 1/16" | Steel | 1/4" | 0.113" | 270° | No | No. 4 | 82° | 00000000 | |||||
0.04" Leaf Thick. | ||||||||||||||
| 1 1/16" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | |||||
| 1 1/4" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | |||||
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | |||||
| 2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | |||||
0.06" Leaf Thick. | ||||||||||||||
| 1 1/4" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | |||||
| 1 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | |||||
| 2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | |||||
| 2 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | |||||
| 3" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | |||||
0.09" Leaf Thick. | ||||||||||||||
| 2" | 1/4" | Steel | 1" | 0.430" | 270° | No | No. 10 | 82° | 00000000 | |||||
| 3" | 1/4" | Steel | 1" | 0.430" | 270° | No | No. 10 | 82° | 00000000 | |||||
| 4" | 1/4" | Steel | 1" | 0.430" | 270° | No | No. 10 | 82° | 00000000 | |||||
| 5" | 1/4" | Steel | 1" | 0.430" | 270° | No | No. 10 | 82° | 00000000 | |||||
Black-Painted Low-Carbon Steel
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | 4 ft. | 6 ft. | |
0.03" Leaf Thick. | |||||||||||
| 1" | 1/16" | Steel | 1/4" | 0.113" | 270° | No | No. 4 | 82° | 00000000 | ||
0.04" Leaf Thick. | |||||||||||
| 1 1/16" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 00000000 | ||
| 1 1/4" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 00000000 | ||
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 00000000 | ||
| 2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 00000000 | ||
0.06" Leaf Thick. | |||||||||||
| 1 1/4" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
| 1 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
| 2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
| 2 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
| 3" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
0.09" Leaf Thick. | |||||||||||
| 2" | 1/4" | Steel | 2" | 0.430" | 270° | No | No. 6 | 82° | 00000000 | ||
| 3" | 1/4" | Steel | 2" | 0.430" | 270° | No | No. 6 | 82° | 00000000 | ||
| 4" | 1/4" | Steel | 2" | 0.430" | 270° | No | No. 6 | 82° | 00000000 | ||
| 5" | 1/4" | Steel | 2" | 0.430" | 270° | No | No. 6 | 82° | 00000000 | ||
Black-Primed Low-Carbon Steel
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | 1 ft. | 3 ft. | 6 ft. | |
0.04" Leaf Thick. | ||||||||||||
| 1 1/16" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 0000000 | |||
| 1 1/4" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 0000000 | |||
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 6 | 82° | 0000000 | |||
| 2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 6 | 82° | 0000000 | |||
0.06" Leaf Thick. | ||||||||||||
| 1 1/4" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||
| 1 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||
| 2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||
| 3" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||
Zinc-Plated Low-Carbon Steel—Dull
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | 1 ft. | 3 ft. | 4 ft. | 6 ft. | 8 ft. | |
0.04" Leaf Thick. | ||||||||||||||
| 1 1/16" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 0000000 | |||||
| 1 1/4" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 0000000 | |||||
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 6 | 82° | 0000000 | |||||
0.06" Leaf Thick. | ||||||||||||||
| 1 1/4" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 1 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 3" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
Nickel-Plated Low-Carbon Steel—Dull
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | Each | |
1 ft. | ||||||||||
0.03" Leaf Thick. | ||||||||||
| 3/4" | 1/16" | Steel | 1/4" | 0.113" | 270° | No | No. 5 | 82° | 00000000 | 000000 |
| 1" | 1/16" | Steel | 1/4" | 0.113" | 270° | No | No. 5 | 82° | 00000000 | 00000 |
0.04" Leaf Thick. | ||||||||||
| 2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 00000000 | 00000 |
3 ft. | ||||||||||
0.03" Leaf Thick. | ||||||||||
| 3/4" | 1/16" | Steel | 1/4" | 0.113" | 270° | No | No. 5 | 82° | 00000000 | 00000 |
0.04" Leaf Thick. | ||||||||||
| 1 1/4" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 00000000 | 00000 |
4 ft. | ||||||||||
0.03" Leaf Thick. | ||||||||||
| 1" | 1/16" | Steel | 1/4" | 0.113" | 270° | No | No. 4 | 82° | 00000000 | 00000 |
0.04" Leaf Thick. | ||||||||||
| 1 1/16" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | 00000 |
| 1 1/4" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | 00000 |
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | 00000 |
| 2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | 00000 |
0.06" Leaf Thick. | ||||||||||
| 1 1/4" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 000000 | 00000 |
| 1 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | 00000 |
| 2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | 00000 |
| 2 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 000000 | 00000 |
| 3" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | 00000 |
6 ft. | ||||||||||
0.03" Leaf Thick. | ||||||||||
| 1" | 1/16" | Steel | 1/4" | 0.113" | 270° | No | No. 4 | 82° | 00000000 | 00000 |
0.04" Leaf Thick. | ||||||||||
| 1 1/16" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | 00000 |
| 1 1/4" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | 00000 |
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | 00000 |
| 2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | 00000 |
0.06" Leaf Thick. | ||||||||||
| 1 1/4" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | 00000 |
| 1 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | 00000 |
| 2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | 00000 |
| 2 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | 00000 |
| 3" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | 00000 |
Brass-Plated Low-Carbon Steel—Dull
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | 4 ft. | 6 ft. | |
0.04" Leaf Thick. | |||||||||||
| 1 1/16" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | ||
| 1 1/4" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | ||
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | ||
| 2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | ||
0.06" Leaf Thick. | |||||||||||
| 1 1/4" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
| 1 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
| 2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
| 2 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
| 3" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
Chrome-Plated Low-Carbon Steel—Dull
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | 4 ft. | 6 ft. | |
0.04" Leaf Thick. | |||||||||||
| 1 1/16" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | ||
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | ||
0.06" Leaf Thick. | |||||||||||
| 1 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
| 2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
| 3" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
Bronze-Plated Low-Carbon Steel—Dull
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | 4 ft. | 6 ft. | |
0.04" Leaf Thick. | |||||||||||
| 1 1/16" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 00000000 | ||
| 1 1/4" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 00000000 | ||
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 00000000 | ||
| 2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 00000000 | ||
0.06" Leaf Thick. | |||||||||||
| 1 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
| 2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
| 2 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
| 3" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
Black Powder-Coated Low-Carbon Steel
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | 1 ft. | 3 ft. | 8 ft. | |
0.04" Leaf Thick. | ||||||||||||
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 6 | 82° | 0000000 | |||
0.06" Leaf Thick. | ||||||||||||
| 1 1/4" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | |||
| 1 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||
| 2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | |||
| 3" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | |||
Piano Hinges with Slots
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Mounting slots allow door alignment adjustments during and after hinge installation. Longer than other hinges, piano hinges run the entire length of doors and lids for strength and durability. All of these hinges have a standard clearance—when they are closed, the distance between the leaves is about the same as the pin diameter.
For technical drawings and 3-D models, click on a part number.
Knuckle | Mounting Slot | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Lg. | Wd. | Mounting Fasteners Included | Mounting Screw Size | 4 ft. | 6 ft. | |
Low-Carbon Steel—Dull | ||||||||||||
0.06" Leaf Thick. | ||||||||||||
| 1 1/2" | 1/8" | Low-Carbon Steel | 1/2" | 0.245" | 270° | 3/8" | 3/16" | No | No. 6 | 0000000 | ||
| 2" | 1/8" | Low-Carbon Steel | 1/2" | 0.245" | 270° | 3/8" | 3/16" | No | No. 6 | 0000000 | ||
0.08" Leaf Thick. | ||||||||||||
| 2" | 3/16" | Low-Carbon Steel | 1" | 0.187" | 270° | 3/8" | 13/64" | No | No. 8 | 0000000 | ||
0.12" Leaf Thick. | ||||||||||||
| 2" | 1/4" | Low-Carbon Steel | 2" | 0.250" | 270° | 3/8" | 1/4" | No | No. 10 | 0000000 | ||
| 3" | 3/8" | Low-Carbon Steel | 2" | 0.375" | 270° | 5/8" | 5/16" | No | 1/4" | 0000000 | ||
| 4" | 3/8" | Low-Carbon Steel | 2" | 0.375" | 270° | 3/4" | 3/8" | No | 5/16" | 0000000 | ||
Tight-Clearance Piano Hinges
Tight Clearance
Between Hinge
Leaves
Between Hinge
Leaves
The leaves of these hinges almost touch when the door is closed. They are often used in electrical enclosures for a tight seal. Longer than other hinges, piano hinges run the entire length of doors and lids for strength and durability.
For technical drawings and 3-D models, click on a part number.
Knuckle | ||||||||
|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | 3 ft. | 6 ft. | |
Low-Carbon Steel—Dull | ||||||||
0.04" Leaf Thick. | ||||||||
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | 00000000 | ||
| 2" | 3/32" | Steel | 1/2" | 0.174" | 270° | 00000000 | ||
0.06" Leaf Thick. | ||||||||
| 1 1/16" | 1/8" | Steel | 1/2" | 0.245" | 270° | 00000000 | ||
| 1 1/2" | 3/16" | Steel | 5/8" | 0.308" | 270° | 00000000 | ||
| 2" | 3/16" | Steel | 1/2" | 0.308" | 270° | 00000000 | ||
| 3" | 3/16" | Steel | 5/8" | 0.308" | 270° | 00000000 | ||
0.075" Leaf Thick. | ||||||||
| 1 1/2" | 1/4" | Steel | 1" | 0.400" | 270° | 00000000 | ||
| 2" | 1/4" | Steel | 1" | 0.400" | 270° | 00000000 | ||
| 2 1/2" | 1/4" | Steel | 1" | 0.400" | 270° | 00000000 | ||
| 3" | 1/4" | Steel | 1" | 0.400" | 270° | 00000000 | ||
0.09" Leaf Thick. | ||||||||
| 2" | 1/4" | Steel | 1" | 0.430" | 270° | 00000000 | ||
| 3" | 1/4" | Steel | 1" | 0.430" | 270° | 00000000 | ||
| 4" | 1/4" | Steel | 1" | 0.430" | 270° | 00000000 | ||
0.12" Leaf Thick. | ||||||||
| 2" | 1/4" | Steel | 2" | 0.490" | 270° | 00000000 | ||
| 3" | 1/4" | Steel | 2" | 0.490" | 270° | 00000000 | ||
Extra-Clearance Piano Hinges
Extra Clearance
Between Hinge
Leaves
Between Hinge
Leaves
When the door is closed, the distance between the leaves is larger than the pin diameter, creating an offset to accommodate a gasket or trim. Longer than other hinges, piano hinges run the entire length of doors and lids for strength and durability.
For technical drawings and 3-D models, click on a part number.
Knuckle | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Offset | Range of Motion | 3 ft. | 6 ft. | |
Low-Carbon Steel—Dull | |||||||||
0.04" Leaf Thick. | |||||||||
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 1/4" | 225° | 0000000 | ||
| 2" | 3/32" | Steel | 1/2" | 0.174" | 1/4" | 225° | 0000000 | ||
0.06" Leaf Thick. | |||||||||
| 1 1/16" | 1/8" | Steel | 1/2" | 0.245" | 5/16" | 225° | 0000000 | ||
| 1 1/2" | 3/16" | Steel | 1/2" | 0.308" | 3/8" | 225° | 0000000 | ||
| 2" | 3/16" | Steel | 1/2" | 0.308" | 3/8" | 225° | 0000000 | ||
0.075" Leaf Thick. | |||||||||
| 2" | 1/4" | Steel | 1" | 0.400" | 1/2" | 225° | 0000000 | ||
| 3" | 1/4" | Steel | 1" | 0.400" | 1/2" | 225° | 0000000 | ||
0.09" Leaf Thick. | |||||||||
| 2" | 1/4" | Steel | 1" | 0.430" | 9/16" | 225° | 0000000 | ||
| 3" | 1/4" | Steel | 1" | 0.430" | 9/16" | 225° | 0000000 | ||
0.12" Leaf Thick. | |||||||||
| 2" | 1/4" | Steel | 2" | 0.490" | 11/16" | 225° | 0000000 | ||
| 3" | 1/4" | Steel | 2" | 0.490" | 11/16" | 225° | 0000000 | ||