We will reply to your message within an hour.
Attach these pins to a machine cover or access panel, then clip them in to receptacles installed in the enclosure for quick access. Pins lock in place until you release them.
Use the key to unlock these pins, then press the button to release the spring-loaded retaining balls. Two-step locking prevents accidental removal.
The smooth ring handle on these pins won't catch on parts. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.
These pins have a low-profile head, so they won't get knocked out of place. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.
A bright-orange plastic-coated handle makes these pins easy to see and easy to grip. Pins have a spring-loaded ball that pops out when the pin is pushed into a hole, and retracts when the pin is pulled out.
A T-handle makes these pins easy to grip. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.
A smooth ball handle is easy to grip and won't catch on other parts. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.
The smooth ring handle on these pins won't catch on parts. The shoulder keeps a portion of the pin outside the hole and makes them easy to grab.
A T-handle makes these pins easy to grip. The shoulder keeps a portion of the pin outside the hole and makes them easy to grab.
Retract the nose by pulling the knob.
Lock the nose into the retracted position by pulling the knob and rotating it 90°.
The ring allows you to attach these spring plungers to a lanyard.
Lock the nose into the retracted position by pulling the ring and rotating it 90°.
Use the lanyard as a tether to secure the spring plunger to machinery and prevent accidental drops.
Lock the nose into the retracted position by pulling the handle and rotating it 90°.
Install by hand or with a hex key in low-clearance applications.
Thread onto machinery or attach a knob or handle to the threaded spindle.
A T-handle makes these spring plungers easy to grip.
A quarter turn of the handle locks these plungers in the retracted position. The T-handle is easy to grip.
A smooth ball handle is easy to grip and won't catch on other parts.
A quarter turn of the handle locks these plungers in the retracted position. The smooth ball handle is easy to grip and won't catch on other parts.
An L-handle takes up less space than a T-handle.
Add a knob or handle to the threaded shank.
Lock the nose into the retracted position by pulling and rotating the knob.
Two holes in the plate allow these plungers to be mounted to a flat surface.
Lock the nose in the retracted position by pulling the knob and rotating it 90°.
Use an arbor press or similar pressure tool to install these spring plungers into a panel.
Insert the nose into a panel; then thread on the nut and tighten using an installation wrench.
Designed with a flange to keep the plunger from being pushed through a hole when the ball is depressed.
The flangeless design allows these spring plungers to mount flush with a surface.
Install these spring plungers with a screwdriver—they're slotted on one or both ends.
Install with a hex key for more torque than slotted ball-nose spring plungers.
A flange keeps the plunger from being pushed through a hole when the ball is depressed.
Noses are up to four times longer than standard long-nose press-fit spring plungers.
Install with a hex key for more torque than slotted long-nose spring plungers.
These spring plungers have a nose that is about three-times longer than standard long hex-nose spring plungers.
Fasten from the nose end with a wrench for more torque than slotted long-nose spring plungers.
Slotted on both ends for installation with a screwdriver.
Install with a driver.
Weld these catches in place for a strong permanent hold.
Mount ball-nose and long-nose spring plungers to fixture surfaces.
Install spring plungers from the nose end without depressing the nose.