About Lifting with Hoist Rings
More
Weld-On Tie-Down Rings
Weld these rings to a surface for a more secure connection than other tie-down rings. The ring pivots 180° to secure loads in various directions. They are also known as lashing rings.
Zinc-plated steel rings have mild corrosion resistance.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Ring | Base | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Inner Wd. | Ht. | Thick. | Style | Lg. | Wd. | Ht. | Thick. | Material | Each | ||
Zinc-Plated Steel | ||||||||||||
A | 2,000 | 2 9/16" | 2 11/16" | 3/8" | D-Ring | 2" | 15/16" | __ | 1/4" | Low-Carbon Steel | 0000000 | 00000 |
Blue Painted Steel | ||||||||||||
A | 3,000 | 1 1/2" | 3 3/16" | 1/2" | D-Ring | 1 3/8" | 1 15/16" | __ | __ | Alloy Steel | 0000000 | 00000 |
A | 5,000 | 1 3/4" | 3 7/16" | 9/16" | D-Ring | 1 5/8" | 1 15/16" | __ | __ | Alloy Steel | 0000000 | 00000 |
A | 8,000 | 2" | 4 1/16" | 11/16" | D-Ring | 1 13/16" | 2 3/16" | __ | __ | Alloy Steel | 0000000 | 00000 |
A | 13,500 | 2 11/16" | 5 11/16" | 15/16" | D-Ring | 2 1/2" | 3 1/16" | __ | __ | Alloy Steel | 0000000 | 000000 |
A | 20,000 | 2 3/4" | 6" | 1 1/16" | D-Ring | 2 1/2" | 3 5/8" | __ | __ | Alloy Steel | 0000000 | 000000 |
C | 5,000 | 1 7/8" | 3 3/8" | 9/16" | D-Ring | 5 1/4" | 2 5/8" | 1 1/16" | __ | Alloy Steel | 0000000 | 000000 |
C | 10,000 | 2 3/8" | 4 1/16" | 13/16" | D-Ring | 6 11/16" | 3 1/8" | 1 7/16" | __ | Alloy Steel | 0000000 | 000000 |
Red Painted Steel | ||||||||||||
B | 2,100 | 1 7/16" | 2 9/16" | 0.43" | D-Ring | 1 1/4" | 1 1/4" | __ | __ | Alloy Steel | 0000000 | 00000 |
B | 3,500 | 1 5/8" | 3 1/16" | 0.55" | D-Ring | 1 1/2" | 1 1/2" | __ | __ | Alloy Steel | 0000000 | 00000 |
B | 7,100 | 1 7/8" | 3 3/4" | 0.71" | D-Ring | 1 3/4" | 1 3/4" | __ | __ | Alloy Steel | 0000000 | 00000 |
B | 12,000 | 2 5/8" | 5 3/8" | 0.94" | D-Ring | 2 3/8" | 2 3/8" | __ | __ | Alloy Steel | 0000000 | 00000 |
B | 18,100 | 2 13/16" | 5 3/4" | 1.1" | D-Ring | 2 11/16" | 2 9/16" | __ | __ | Alloy Steel | 0000000 | 00000 |
B | 34,200 | 4 3/4" | 8 1/8" | 1 1/2" | D-Ring | 3 3/4" | 4 1/4" | __ | __ | Alloy Steel | 0000000 | 000000 |
Steel | ||||||||||||
A | 4,080 | 2 3/8" | 3 1/2" | 1/2" | D-Ring | 2" | 1 5/16" | __ | 11/16" | Low-Carbon Steel | 0000000 | 00000 |
A | 4,080 | 2 1/2" | 5 1/2" | 1/2" | D-Ring | 2" | 1 5/16" | __ | 3/8" | Low-Carbon Steel | 0000000 | 0000 |
A | 6,130 | 3" | 4 1/4" | 5/8" | D-Ring | 2 1/2" | 1 5/8" | __ | 3/8" | Low-Carbon Steel | 0000000 | 00000 |
A | 9,120 | 3" | 4 1/2" | 3/4" | D-Ring | 2 1/4" | 1 5/8" | __ | 3/8" | Low-Carbon Steel | 0000000 | 00000 |
A | 15,500 | 3" | 6" | 1" | D-Ring | 2 1/4" | 2 1/8" | __ | 3/8" | Low-Carbon Steel | 0000000 | 00000 |
D | 15,500 | 3" | 5 1/2" | 1" | Angled D-Ring | 2 1/4" | 2 1/8" | __ | 1/2" | Low-Carbon Steel | 0000000 | 00000 |
Fixed Weld-On Tie-Down Rings
Also known as pad eyes, these rigid rings provide a strong, fixed anchor point on machinery, equipment, and vehicles. Weld them to a surface for a more secure connection than other tie-down rings.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Ring | Base | |||||||
---|---|---|---|---|---|---|---|---|
Style | Inner Wd. | Ht. | Thick. | Style | Dia. | Material | Each | |
Steel | ||||||||
A | 1/4" | 3/4" | 3/16" | Round | 5/8" | Low-Carbon Steel | 0000000 | 00000 |
A | 3/8" | 1" | 1/4" | Round | 7/8" | Low-Carbon Steel | 0000000 | 0000 |
A | 5/8" | 1 5/16" | 1/4" | Round | 1" | Low-Carbon Steel | 0000000 | 0000 |
A | 3/4" | 1 5/8" | 3/8" | Round | 1 1/16" | Low-Carbon Steel | 0000000 | 0000 |
A | 1" | 2 5/16" | 9/16" | Round | 1 7/16" | Low-Carbon Steel | 0000000 | 00000 |
A | 1 3/16" | 2 3/8" | 7/16" | Round | 1 11/16" | Low-Carbon Steel | 0000000 | 0000 |
A | 1 1/4" | 2 3/4" | 11/16" | Round | 1 3/4" | Low-Carbon Steel | 0000000 | 00000 |
Swiveling Weld-On Tie-Down Rings
Before welding, these rings swivel all the way around to accommodate ties in any direction. Weld them to any surface for a more secure connection than other tie-down rings.
Style B rings are angled, making it easier to attach bulky ties and straps. They also protect ties and straps from abrasion to prevent them from wearing down over time.
Warning: Never use for lifting applications.
Tie-Down Rings
These rings pivot to secure loads in various directions.
Style L accept carriage bolts with a square neck. The neck shape keeps bolts from turning when tightening with a nut.
Style N have a loose ring that twists to minimize abrasion on webbing and rope.
Zinc-plated steel and powder-coated steel rings have mild corrosion resistance.
316 stainless steel rings have excellent resistance to salt water and chemicals.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Ring | Base | Mounting Holes | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Capacity, lbs. | Inner Wd. | Ht. | Thick. | Style | Dia. | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Wd. | Ctr.-to-Ctr. Lg. | Each | |
Zinc-Plated Steel | ||||||||||||||||
A | 500 | 2" | 2 1/4" | 1/4" | D-Ring | __ | 1 5/16" | 1 5/8" | Zinc-Plated Steel | No | 1 | 13/32" | __ | __ | 0000000 | 00000 |
A | 1,000 | 1 7/16" | 1 1/2" | 1/4" | D-Ring | __ | 1 5/8" | 1 3/8" | Zinc-Plated Steel | No | 1 | 7/16" | __ | __ | 00000000 | 0000 |
C | 200 | 1 9/16" | 1 13/16" | 3/16" | D-Ring | 4 1/8" | __ | __ | Zinc-Plated Steel | No | 2 | 9/32", 13/32" | __ | 1 1/16" | 00000000 | 0000 |
D | 500 | 2" | 2 1/4" | 1/4" | D-Ring | 4 1/16" | __ | __ | Polypropylene Plastic | No | 3 | 9/32", 13/32" | __ | 1 3/16" | 0000000 | 0000 |
E | 400 | 1 1/2" | 1 11/16" | 1/4" | D-Ring | __ | 2 3/16" | 1 1/4" | Zinc-Plated Steel | No | 2 | 1/4" | __ | 1 1/4" | 0000000 | 0000 |
E | 800 | 1" | 1 13/16" | 1/4" | D-Ring | __ | 2 1/8" | 13/16" | Zinc-Plated Steel | No | 2 | 9/32" | __ | 1 3/8" | 0000000 | 0000 |
E | 1,000 | 1 1/2" | 1 3/8" | 1/4" | D-Ring | __ | 1 5/8" | 1 1/4" | Zinc-Plated Steel | No | 2 | 1/4" | __ | 15/16" | 0000000 | 0000 |
E | 1,000 | 1 1/2" | 1 13/16" | 1/4" | D-Ring | __ | 1 9/16" | 1 1/4" | Zinc-Plated Steel | No | 2 | 1/4" | __ | 7/8" | 00000000 | 0000 |
E | 1,500 | 2" | 2 1/8" | 1/4" | D-Ring | __ | 2 1/8" | 1 7/8" | Zinc-Plated Steel | No | 2 | 1/4" | __ | 1 3/8" | 00000000 | 0000 |
J | 3,500 | 2 5/16" | 1 3/4" | 5/16" | D-Ring | __ | 2 1/8" | 1 7/8" | Zinc-Plated Steel | No | 4 | 1/4" | 1 1/4" | 1 1/8" | 0000000 | 00000 |
J | 3,500 | 3 3/16" | 3 3/4" | 5/16" | D-Ring | __ | 2 3/16" | 2 1/2" | Zinc-Plated Steel | No | 4 | 1/4" | 1 3/8" | 1 3/4" | 0000000 | 00000 |
Black Zinc-Plated Steel | ||||||||||||||||
B | 800 | 1 5/8" | 2 1/8" | 1/4" | D-Ring | __ | 1 9/16" | 1 5/8" | Zinc-Plated Steel | No | 1 | 13/32" | __ | __ | 00000000 | 0000 |
Red Powder-Coated Steel | ||||||||||||||||
M | 6,940 | 1 9/16" | 5 1/8" | 11/16" | Link | __ | 5 1/8" | 1 1/2" | Powder-Coated Steel | Yes | 2 | 11/16" | __ | 3 1/2" | 0000000 | 00000 |
M | 11,680 | 1 15/16" | 6 3/4" | 7/8" | Link | __ | 6 1/2" | 1 7/8" | Powder-Coated Steel | Yes | 2 | 7/8" | __ | 4 1/2" | 0000000 | 000000 |
Steel | ||||||||||||||||
L | 4,080 | 2 3/8" | 3 1/2" | 1/2" | D-Ring | __ | 3" | 1 3/4" | Steel | No | 2 | 13/32" | __ | 2" | 0000000 | 0000 |
316 Stainless Steel | ||||||||||||||||
N | 5,620 | 1 5/16" | 3 1/4" | 11/16" | Round | __ | 2" | 1 3/4" | 316 Stainless Steel | No | 1 | 3/8" | __ | __ | 00000000 | 00000 |
Recessed Tie-Down Rings
These rings mount flush and fold down when not in use.
Straight rings have a flat section that prevents webbing from twisting.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
For Cutout | Ring | Base | Mounting Hole | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Dp. | Lg. | Wd. | Dia. | For Max. Webbing Wd. | Inner Wd. | Ht. | Thick. | Lg. | Wd. | Dia. | Material | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. Wd. | Ctr.-to-Ctr. Lg. | No. of | Each | |
Zinc-Plated Steel | |||||||||||||||||||
Round Ring | |||||||||||||||||||
1,660 | 1" | 2 7/8" | 2 7/8" | __ | __ | 1 3/8" | 1 3/4" | 7/16" | 4 7/8" | 4 1/2" | __ | Zinc-Plated Steel | No | 13/32" | 3" | 3 1/4" | 4 | 0000000 | 00000 |
D-Ring | |||||||||||||||||||
2,000 | 1" | __ | __ | 4 1/2" | __ | 3 3/8" | 1 13/16" | 5/16" | __ | __ | 6 1/4" | Zinc-Plated Steel | No | 11/32" | 3 13/16" | 3 13/16" | 4 | 0000000 | 00000 |
D-Ring and Straight Ring | |||||||||||||||||||
830 | 1" | __ | __ | 4 1/2" | 2" | 2 7/8", 2 1/8" | 1 1/2", 1 3/16" | 3/8", 3/8" | __ | __ | 6 1/4" | Zinc-Plated Steel | No | 11/32" | 3 13/16" | 3 13/16" | 4 | 0000000 | 00000 |
Dimpled Tie-Down Rings
Dimples hold the base tight to prevent it from swiveling.
Style B has loose rings that twist to minimize abrasion on webbing and rope.
Zinc-plated steel rings have mild corrosion resistance.
316 stainless steel rings have excellent chemical and corrosion resistance, so they won’t rust in marine environments.
Warning: Never use for lifting applications.
Ring | Base | Mounting Holes | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Inner Wd. | Ht. | Thick. | Style | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Dia. | Each | |
Style A | ||||||||||||
Zinc-Plated Steel | ||||||||||||
5,600 | 1 1/8" | 1 3/16" | 1/2" | Round | 2 1/2" | 1 3/4" | Zinc-Plated Steel | No | 1 | 7/16" | 00000000 | 00000 |
316 Stainless Steel | ||||||||||||
5,620 | 1 1/8" | 1 3/16" | 1/2" | Round | 2 1/2" | 1 3/4" | 316 Stainless Steel | No | 1 | 7/16" | 00000000 | 0000 |
Style B | ||||||||||||
316 Stainless Steel | ||||||||||||
5,620 | 1 1/8" | 1 3/16" | 1/2" | Round | 2 1/2" | 1 3/4" | 316 Stainless Steel | No | 1 | 7/16" | 00000000 | 00000 |
Magnetic Tie-Down Rings
Use these rings to create a temporary anchor point on ferrous metal surfaces. Turn the handle to engage the magnet.
Note: Capacity is based on direct contact on a flat, smooth, untreated surface. Variations in mounting surface conditions will reduce capacity.
Warning: Never use for lifting applications.
Ring | Handle | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Inner Wd. | Style | Lg. | Wd. | Overall Ht. | Housing Material | Material | Color | Magnet Type | For Max. Surface Thick. | Each | |
35 | 1/2" | Round | 4 1/8" | 1 13/16" | 2 3/4" | Nickel-Plated Steel | Powder-Coated Aluminum | Black | Rare Earth | 1/4" | 000000 | 000000 |
Webbing Guides
Use these guides to prevent webbing from twisting, or use as anchor points in tie-down applications. They are also known as footman's loops.
Nylon plastic guides are chemical and oil resistant, nonconductive, and lightweight.
High-carbon steel guides are stronger and more scratch resistant than stainless steel guides. However, unfinished carbon steel is not corrosion resistant and should be used indoors.
Stainless steel guides have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
Guides with a zinc plating have mild corrosion resistance. Guides with a nickel plating resist chemicals and salt water, and have a decorative metallic finish.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Webbing Wd. | Capacity | Lg. | Wd. | Wd. at Ctr. | Inner Ht. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Color | Pkg. Qty. | Pkg. | |
5/16" | 230 lbs. | 1 7/8" | 1/2" | 1/4" | 1/4" | No | 2 | 3/16" | 1 13/32" | Black | 10 | 0000000 | 00000 |
Mounting Holes | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Webbing Wd. | Lg. | Wd. | Wd. at Ctr. | Inner Ht. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Pkg. Qty. | Pkg. | |
Zinc-Plated Low-Carbon Steel | |||||||||||
1" | 2 5/8" | 1/2" | 1/4" | 1/4" | No | 2 | 3/16" | 2 1/8" | 10 | 0000000 | 000000 |
1 1/2" | 3 1/16" | 1/2" | 1/4" | 5/16" | No | 2 | 1/4" | 2 5/8" | 10 | 0000000 | 00000 |
1 1/2" | 3 1/8" | 1/2" | 1/4" | 7/16" | No | 2 | 1/4" | 2 5/8" | 10 | 0000000 | 00000 |
2" | 3 5/8" | 1/2" | 1/4" | 5/16" | No | 2 | 9/32" | 3 1/8" | 10 | 0000000 | 00000 |
Mounting Holes | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Webbing Wd. | Lg. | Wd. | Wd. at Ctr. | Inner Ht. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Pkg. Qty. | Pkg. | |
Zinc-Plated High-Carbon Steel | |||||||||||
1" | 2 5/8" | 1/2" | 1/4" | 1/4" | No | 2 | 7/32" | 2 1/8" | 1 | 0000000 | 00000 |
1" | 2 5/8" | 1/2" | 1/4" | 5/8" | No | 2 | 7/32" | 2 1/8" | 1 | 0000000 | 0000 |
Nickel-Plated High-Carbon Steel | |||||||||||
2" | 3 5/8" | 1/2" | 1/4" | 5/16" | No | 2 | 1/4" | 3 1/8" | 1 | 0000000 | 0000 |
Wraparound Rope Cleats
Wind rope around these cleats for a secure, temporary hold.
Bolt-on cleats have exposed fasteners that attach directly to the deck or other surface.
Galvanized iron and chrome-plated zinc cleats have mild corrosion resistance.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||
---|---|---|---|---|---|---|---|---|
For Max. Rope Dia. | Lg. | Overall Ht. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Each | |
Bolt-On | ||||||||
Galvanized Iron | ||||||||
1/4" | 3 1/2" | 1" | No | 2 | 3/16" | 13/16" | 00000000 | 00000 |
5/16" | 4" | 1 1/8" | No | 2 | 7/32" | 7/8" | 00000000 | 0000 |
3/8" | 5" | 1 5/16" | No | 2 | 1/4" | 1 1/16" | 00000000 | 0000 |
7/16" | 6" | 1 3/8" | No | 2 | 9/32" | 1 1/4" | 00000000 | 0000 |
5/8" | 8" | 2 1/8" | No | 2 | 3/8" | 1 11/16" | 00000000 | 00000 |
3/4" | 10" | 2 1/2" | No | 2 | 7/16" | 2 3/8" | 00000000 | 00000 |
3/4" | 12" | 2 7/8" | No | 2 | 7/16" | 3 1/4" | 00000000 | 00000 |
1" | 14" | 3 1/2" | No | 2 | 5/8" | 4 1/4" | 00000000 | 00000 |
Horizontal Snap-In Load-Securing Track
Use this track, also known as E-Track, to lay the groundwork for a tie-down system. Snap in straps, anchor points, and other accessories to keep cargo from shifting inside vans, trucks, and trailers.
Galvanized steel track is corrosion resistant.
For technical drawings and 3-D models, click on a part number.
Vertical Snap-In Load-Securing Track
Use this track, also known as E-track, to lay the groundwork for a tie-down system. Snap in straps, anchor points, and other accessories to keep cargo from shifting inside vans, trucks, and trailers.
For technical drawings and 3-D models, click on a part number.
Weld-On Hoist Rings—For Lifting
For a more secure hold than standard hoist rings, weld these hoist rings to your load. They’re ideal for angular lifting because they withstand stresses that bend or break eyebolts.
The ring on 180° pivot hoist rings moves from front to back. Their base does not swivel for added stability.
180° pivot and 360° swivel hoist rings not only have a ring that moves from front to back, but their base also swivels to handle pitch, roll, and sway when lifting heavy or unbalanced loads.
Black-oxide steel hoist rings have mild corrosion resistance.
Note: Hoist rings must be welded properly for the listed capacities to apply.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Inside Wd. | Overall Ht. | Vertical Capacity, lbs. | Specifications Met | Each | |
180° Pivot | |||||
---|---|---|---|---|---|
Orange-Painted Steel | |||||
1 1/2" | 3 1/8" | 3,300 | CE Marked | 0000000 | 000000 |
1 3/4" | 3 9/16" | 5,510 | CE Marked | 0000000 | 00000 |
2" | 4" | 8,810 | CE Marked | 0000000 | 00000 |
2 5/8" | 6 3/16" | 22,040 | CE Marked | 0000000 | 000000 |
2 11/16" | 5 9/16" | 14,770 | CE Marked | 0000000 | 00000 |
180° Pivot and 360° Swivel | |||||
Black-Oxide Steel | |||||
2" | 5 1/2" | 5,000 | ASME B30.26 | 0000000 | 000000 |
3" | 7 5/8" | 10,000 | ASME B30.26 | 0000000 | 000000 |
4" | 9 1/2" | 24,000 | ASME B30.26 | 0000000 | 000000 |
Routing Ringbolts
Mount these ringbolts into a threaded hole, or use the nut for through-hole mounting. The pivoting ring allows material to move freely.
For technical drawings and 3-D models, click on a part number.
Eye Dia. | Overall | ||||||||
---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Thread Size | Thread Lg. | Shank Lg. | Lg. | Wd. | Ht. | Each | |
Galvanized Steel | |||||||||
1 3/4" | 44 | 1/4"-20 | 1 1/2" | 2" | 2 1/4" | 1" | 4 7/8" | 0000000 | 000000 |
1 3/4" | 44 | 1/4"-20 | 2" | 4" | 2 1/4" | 1" | 6 7/8" | 0000000 | 00000 |
2" | 51 | 5/16"-18 | 1 1/2" | 2 1/4" | 2 5/8" | 1 1/4" | 5 5/8" | 0000000 | 00000 |
2 1/2" | 64 | 3/8"-16 | 1 1/2" | 2 1/2" | 3 1/4" | 1 1/2" | 6 3/4" | 0000000 | 00000 |
2 1/2" | 64 | 3/8"-16 | 2" | 4 1/2" | 3 1/4" | 1 1/2" | 8 3/4" | 0000000 | 00000 |
3" | 76 | 1/2"-13 | 1 1/2" | 3 1/4" | 4" | 2" | 8 1/2" | 0000000 | 00000 |
3" | 76 | 1/2"-13 | 3" | 6" | 4" | 2" | 11 1/4" | 0000000 | 00000 |
3" | 76 | 3/4"-10 | 2 1/2" | 4 1/2" | 4 1/2" | 3" | 10 3/4" | 0000000 | 00000 |
Removable Routing Ringbolts
Anchor these ringbolts where you need them, then remove the ring when not in use. To install, insert the mounting bolt into a hole and secure with the included washer and nut. Once installed, the mounting bolt stays in place. Insert the ring by threading into the mounting bolt; remove by unthreading it.
For technical drawings and 3-D models, click on a part number.