A reversible anvil lets you adapt the gauge to the shape of the object you are measuring. Use the round face on the anvil to measure the wall thickness of pipe, tubing, and other curved surfaces. Use the flat face to measure sheet metal, paper, and other flat stock.

Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.

USB data cable (sold separately) connects the gauge directly to your PC.

10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.

10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.

Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.

Thin as a blade, the anvil on these gauges fits into grooves in flat surfaces where typical thickness gauges can’t reach. Use them in tight and difficult-to-measure spaces, such as grooves in V-belts, stair treads, and sheet metal.

The LCD display makes results easy to read. With the zero-set button, you can start measuring at any point. The zero-position memory, also known as absolute (ABS) positioning, retains the gauge’s measuring position when the scale is off. All have both internal data storage and an SPC data output. Connect them to a computer or data processor to analyze data and monitor measurements in real time.

USB data cables (sold separately) connect the gauge directly to your PC.

Small enough to fit between your thumb and index finger, use this gauge for quick thickness checks on paper, film, and other flat stock. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button allows you to start measuring at any point.

This gauge comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. Small enough to fit between your thumb and index finger, use it for quick thickness checks on paper, film, and other flat stock. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button allows you to start measuring at any point.

Confirm a part is within your set tolerance. Set your minimum and maximum tolerance to quickly check where your part falls. They have a plain thimble that turns freely without friction or a stopping device. These micrometers rely on operator feel for accurate measurements.

Mitutoyo 113 series micrometers are limit-style micrometers. Set one spindle at your minimum and the other at your maximum tolerance.

Mitutoyo 523 series micrometers have tolerance pointers on the dial gage, so you can set your minimum and maximum tolerance.

With a calibration certificate traceable to NIST that says they've passed a test for accuracy, you can trust these gauges to confirm if your object's outer diameter is within tolerance. They're also known as snap gauges because they snap onto rods, shafts, and other cylindrical objects. To maintain their accuracy over time, they have a hardened steel frame and spindle that withstands flexing and temperature changes.

Attach dial indicators to measure the difference between your part’s actual diameter and the expected diameter. They also come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.

For technical drawings and 3-D models, click on a part number.