Rollers support and help guide material into machinery.

Rollers support and help guide material into machinery.

Arms are long and at a wide angle to support pipe from 4" to 36" in diameter.

These rollers have 2 1/2" diameters.

Also known as line-shaft conveyors, these are driven by a drive shaft and round belts.

Steel construction and greater horsepower give these conveyors higher capacities and speeds than standard Ready-to-Run Mini Belt Conveyors.

A top-mount motor lets you rest these conveyors directly on a bench top.

Side rails keep packages from sliding off.

Use these 2- to 3-foot conveyor sections alone or add to a roller conveyor to rotate and position material along a conveying line.

Without a shelf, these tables provide room to pull up a stool or chair. The durable steel top won't warp or splinter.

A lower shelf provides additional storage space. Often used in laboratories, these tables stand up to repeated washdowns and resist damage from grease and chemicals.

The wood top on these tables is nonconductive, resists impact, and can be sanded and refinished.

With a flatness tolerance of 0.002" per foot, these tables provide an accurate reference surface for layout and inspection work. They have a thick steel frame and welded construction to support 35,000 lbs.

These durable tables won't warp or splinter. Use them to elevate machinery and equipment up to 24" from the floor.

The wood top is nonconductive as well as impact and chemical resistant. It can be sanded and refinished. Use these tables to elevate machinery and equipment 24" from the floor.

With a flatness tolerance of 0.002" per foot, these 24" high tables provide an accurate reference surface for layout and inspection work. They have a thick steel frame and welded construction to support 35,000 lbs.

With an extra-smooth nonconductive surface, these tables won't trap dirt and oil, making them easy to clean. They can be configured at a custom height.

With a thick steel frame and a capacity of at least 10,500 lbs., these welded tables are our strongest and most durable adjustable-height tables. They can be configured for either seated or standing tasks.

Turn the crank to adjust the height of these tables without clearing off the top or loosening leg bolts. They can be configured for either seated or standing tasks.

Use these legs to make or repair a folding table.

These tables have a fixed height.

Keep sawdust and other particles out of the air while drilling, sanding, and finishing wood products. Air blowers pull particles into the table through holes in the surface, making sure you don't breathe them.

Provide a convenient place outdoors to sit and eat.

Start with the workbench and then customize the interior by adding drawers and shelves.

These workbenches have bases with a combination of drawers and doors that offer plenty of storage options for tools and parts.

For added security, drawers are concealed behind padlockable doors.

Use two legs to hold up to 4,000 lbs. Adjust height in 1 1/2" increments with rivets that slide into keyhole slots.

Use two legs for a capacity of 6,000 lbs. Remove and reposition the bolts to adjust height in 1" increments.

With thick steel and an all-welded construction, these legs support the highest capacities of all our workbench legs.

These legs provide more leg room than other styles.

To keep work from falling off the top, these workbenches have a backstop and side stops.

Keyhole slots in the legs allow you to adjust the height of these workbenches in 1 1/2" increments.

Position these shelves at any angle.

Adjust the shelves to accommodate a computer and other electronic equipment.

Create a personalized work area by adding accessories. These workstations are often used for small-parts assembly.

The work surface is positioned at a comfortable height for writing and working while standing.

The top compartment has a window that shields the monitor while providing a clear view of the screen.

Mix and match components to design an office work area that can be reconfigured as needed.

The top compartment has a window that shields the monitor while providing a clear view of the screen.

Ball-and-socket connections allow 360° positioning.

Heavy duty construction adds strength for higher load capacities than other positioning arms.

Stronger and with greater load capacities than gooseneck-style positioning arms, these arms keep their shape even when moving or when exposed to vibration. They’re often used in robotics and conveyor applications when frequent repositioning isn’t required.

Secure small parts in spring clamps to keep hands free for soldering, gluing, and assembly.

Rotate the head 360° to use three different vise jaws and lock workpieces in position at 45° intervals.

Use these vises for general purpose workholding.

Designed for outdoor use, these vises have a finish that resists corrosion.

The movable jaw can be repositioned to extend the jaw opening. Pull out the entire sliding section and insert it on the opposite side of the vise.

Hold your smallest workpieces in these vises, which have a clamp-on base for quick installation and removal from a benchtop.

Attach these workstops to the side or top of your vise to keep parts in position for machining.

Keep parts in position for machining by mounting these workstops to your vise jaws.

The jaws move inward at the same time to consistently position your workpiece in the center of the vise.

Reliably hold workpieces with these basic machine vises.