We will reply to your message within an hour.
Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.
This welded, one-piece strut channel combines two strut channels back-to-back.
This welded, one-piece strut channel combines two strut channels side-to-side.
Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.
Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.
Slide the strut channel into the tube for telescoping length adjustments.
Create continuous runs of channel without corners.
For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.
Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.
Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.
Attach strut channel at any point on a threaded rod without taking apart your assembly.
These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.
Serrated grooves grip the lip of the channel.
A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.
In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.
Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.
Connect two channels to create a stacked channel.
There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.
Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.
Push these nuts into place rather than threading them onto a fastener.
Keep a rod securely centered against the strut channel.
A tab fits tightly against the lip of the channel to keep these nuts from slipping.
Quickly attach these nuts by twisting them closed at any point along a threaded rod.
Use with hex nuts to connect threaded rod.
Add hardware to strut channel without having to hold the washer in place or reach inside the channel.
Notches on these washers grip the channel to keep them in place.
Keep hardware centered in the strut channel slot.
Securely fasten strut channel to the floor.
Mount a length of strut channel between the ends of a beam to run cable and conduit along the beam without drilling.
Mount strut channel away from walls.
Roll components along strut channel hanging overhead.
Brackets mount on the outside of strut channel to allow trolley movement.
Smoothly move lightweight curtains overhead along strut channel.
Cover rough ends of strut channel.
Support the corners of strut channel structures.
A tab on the end of these shelf brackets fits inside the strut channel for extra stability.
Create a four-sided raceway for cable, or give a more finished look to strut channel structures.
Position two strut channels at a 30° to 90° angle, then tighten the bolt to secure.
Hold two pieces of strut channel together so they can smoothly open or close.
For quick mounting of components, these hangers snap into strut channels for a strong hold and easy repositioning.
Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.
Mount between two strut channels to create a handhold.
Mount these brackets to strut channel to add stair treads. They’re also known as stringers.
Mount to your strut channel to support rail, tube, or pipe.
Mount electrical components along your strut channel to bring power to new locations.
Support and protect conduit by mounting it to strut channel.
Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.
Half the weight of steel, this aluminum framing resists corrosion in wet environments.
Route pipe, tubing, and conduit across strut channel.
Hold pipe, tubing, and conduit away from strut channel.
Even when these clamps are installed side by side, the clamping screws remain accessible. Use them to route pipe, tubing, and conduit across strut channel.
For areas with low clearance, these clamps have the mounting fastener to the side of the material, rather than on top.
Secure insulated pipe to strut channel without pinching the insulation or exposing the pipe. These clamps are sized for use with insulated pipe and have a plastic insert that creates a seal around the insulation to prevent the pipe from sweating, which can cause mold and corrosion.
Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.
Support strut channel at a right angle to the beam.
Customize component placement without drilling leaky holes—these channels screw into the mounting bosses in your enclosure.