Without a shelf, these tables provide room to pull up a stool or chair. The durable steel top won't warp or splinter.

A lower shelf provides additional storage space. Often used in laboratories, these tables stand up to repeated washdowns and resist damage from grease and chemicals.

With an extra-smooth surface, these tables won't trap dirt and oil, making them easy to clean. They are also nonconductive.

With a thick steel frame and welded construction, these tables have a capacity of at least 10,000 lbs.

With an extra-smooth nonconductive surface, these tables won't trap dirt and oil, making them easy to clean. They are often used as printer stands.

The wood top is nonconductive as well as impact and chemical resistant. It can be sanded and refinished. Use these tables to elevate machinery and equipment 24" from the floor.

With a thick steel frame and welded construction, these tables have a capacity of 10,000 lbs. Use them to elevate machinery and equipment 24" from the floor.

With an extra-smooth nonconductive surface, these tables won't trap dirt and oil, making them easy to clean. They can be configured at a custom height.

With a thick steel frame and a capacity of at least 10,500 lbs., these welded tables are our strongest and most durable adjustable-height tables. They can be configured for either seated or standing tasks.

Turn the crank to adjust the height of these tables without clearing off the top or loosening leg bolts. They can be configured for either seated or standing tasks.

Fold these lightweight tables in half and use the handle to carry them with one hand.

Store and transport multiple folding tables.

Build a picnic table with your own wood top and benches.

Replace a table leg or make a table with your own tabletop.

Pull metal particles from grinding, cutting, and finishing workpieces out of the air to avoid breathing them and creating sparks in your work area.

These heavy duty tops have a durable, powder-coated finish.

With thick steel and an all-welded construction, these legs support the highest capacities of all our workbench legs.

Use two legs to hold up to 4,000 lbs. Adjust height in 1 1/2" increments with rivets that slide into keyhole slots.

Use two legs for a capacity of 6,000 lbs. Remove and reposition the bolts to adjust height in 1" increments.

Adjust the height of a workbench without clearing off the top or loosening leg bolts.

The sloped top, drainage hole and plug, and drain pan contain spills when working with fluids.

Choose a workbench and then add any of the optional accessories. All workbenches come with a support brace and have legs with knockouts in the front and back to accept duplex electrical outlets.

Start with the workbench and then customize the interior by adding drawers and shelves.

For added security, drawers are concealed behind padlockable doors.

At 48" wide and greater, these workbenches have a larger work surface and more storage than our standard cabinet workbenches.

Stack these drawers under a workbench.

Prevent tools and parts from rolling off a workbench.

The work surface is positioned at a comfortable height for writing and working while standing.

Switch between sitting and standing while working.

Mix and match components to design an office work area that can be reconfigured as needed.

Create a personalized work area by adding accessories. These workstations are often used for small-parts assembly.

Adjust both the slope and height of the top to a comfortable position for drawing, drafting, and writing.

These tables have a foot lever and hydraulic pump to raise loads and either a hand valve or hand lever for controlled lowering.

An extra-long, reinforced tabletop gives you plenty of room for oversized loads.

Turn the hand wheels to raise the load and tilt it up to 30° for a more ergonomic angle.

An electric motor and a hydraulic pump lift loads with the push of a button.

An extra-large tabletop provides plenty of room for oversized loads.

These tables are compact, yet provide the lifting capacity of standard lift tables.

Choose your table based on capacity, then choose the type of control that best suit your application.

Use one to three springs (included) to automatically keep pallets at a convenient height.

Add components such as clamps, brackets, stops, rests, mounting plates, fixturing squares, risers, and V-blocks to build fixtures for welding and assembly.

Position parts exactly where they’re needed for workers, robots, and other machines to easily access them.

Lock into one of four positions. To unlock, pull the ring on the spring-loaded locking pin.

Ball transfers allow movement in any direction so you can turn material without lifting it.

Rollers support and help guide material into machinery.

Arms are long and at a wide angle to support pipe from 4" to 36" in diameter.

Simplify tasks such as spray painting, repair work, and inspection. These turntables rotate to expose every side of an object while working.

Often used in displays, these turntables have a motor for continuous rotation.