Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to transmit audio, video, and data signals.

Keep personnel safe from electric shock with ground fault protection.

An isolated ground connection on these outlets protects computers and other sensitive equipment from external signals that interfere with the equipment’s performance.

Mount these strips into standard 19" wide electronics racks and enclosures.

This wire is zinc galvanized for good corrosion resistance.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

These rods are precision ground and held to a strict straightness tolerance, so they're ready for turning in a lathe.

A lead-free alternative to 12L14, 1215 carbon steel contains the same amount of sulfur and phosphorus for excellent machinability. It is often used for shaft couplings, studs, and pins.

This wire is coated with oil for corrosion resistance and lubricity. Use it for bundling and as tag wire.

Also known as chrome steel, 52100 is an extremely hard and wear-resistant material. This wire is often used for small-diameter bearings, bushings, and punches.

Also known as reamer blanks, these rods are hardened for increased abrasion and impact resistance.

Ground and held to strict diameter and straightness tolerances, these rods are ready to be turned in a lathe.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

This wire rope provides a good balance of abrasion resistance and flexibility.

This wire rope provides a good balance of abrasion resistance and flexibility.

This wire rope provides a good balance of abrasion resistance and flexibility.

This braided wire has a stiff construction for use as bracing and guy wires.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Flattened outer strands create a smooth surface area that spreads contact to reduce wear.

Install these clamps without any specific orientation, slide the nut over the rope and tighten it onto the threaded halves with a torque wrench.

Make a removable loop without specialty tools for use in noncritical applications, such as fencing. Also known as tiller clamps.

Also known as standard-pattern thimbles, these provide better protection against fraying than light duty thimbles.

These thimbles are also known as thin pattern thimbles.

Install these stud-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Install these clevis-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Also known as open wedge sockets, these end fittings require only a torque wrench to install.

Attach the 90° eye to a surface for support and use the loop to secure the suspended material.

Use the twin hooks to suspend items from two points and use the loop to secure the suspended material. For use with cable trays or signs.

The swivel fork ends allow the lanyard to rotate freely.

With a reinforced loop, also known as a thimble eye, installed on one end, quickly attach a hook or a shackle to a wire rope.

This steel wire rope includes a hook with latch on one end for use with winches.

The swivel hook with latch installed on one end, prevents the wire rope from twisting. It is for use with winches.

Also known as seizing bands, these prevent fraying while cutting wire rope. Wrap the band around the wire rope and squeeze the flat end into the indented end.

Use this wire on steel sheets.

Make welds quickly with this fast-melting wire.

These rods create stronger welds than standard TIG welding rods for steel.

The five flux cores allow fast soldering that uses less solder and transmits less heat to the joint.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

Acid flux has strong cleaning action, but leaves corrosive residue that washes away with water.

This solder is commonly used in solder melting pots.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

Made of indium, this solder is soft and malleable—even as temperatures approach absolute zero—to form an airtight seal between metal and certain non-metal materials.

For use on large, flat areas, this indium ribbon solder is soft and malleable—even as temperatures approach absolute zero—to form an airtight seal between metal.

This solder is commonly used in solder melting pots.

Use this solder for general purpose applications.

This solder is commonly used in solder melting pots.

This solder keeps its strength in applications where vibration and frequent and extreme temperature changes occur, such as in water lines and refrigeration equipment.

The flux residue easily washes away with water.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

The flux residue easily washes away with water.

Use these alloys with most metals in general purpose applications.

When melted, these alloys form a thin liquid that easily flows into smaller gaps than standard gap-filling brazing alloys.

Start brazing with this assortment that includes alloy without cadmium for joining dissimilar metals, alloy without cadmium for copper and copper alloys, and a jar of flux.

These fittings seal out liquids when connecting liquid-tight flexible metal conduit to a knockout in an outlet box or enclosure.

Attach conduit to a knockout in an outlet box or enclosure.

Attach conduit to a knockout in an outlet box or enclosure.

Pull wire and cable while maintaining tension until the line can be permanently anchored. Use these clamps with stranded bare steel wire and cable.

The loops tighten by the weight of your cable or by manual adjustment. These grips are often wrapped around a beam or pipe.

Thread your fastener into holes or onto plugs for quick and accurate size identification.

Determine threads per inch and thread pitch on a variety of external and internal threads.

Identify Acme threads and use as a guide while grinding and cutting Acme threads to a 29° included angle.