Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into low-strength fasteners, pins, and axles.

These rods are zinc galvanized for good corrosion resistance.

Ready for turning in a lathe, these rods are precision ground and held to a strict straightness tolerance.

Made with more carbon and manganese than other easy-to-machine carbon steels, 1144 carbon steel has a higher yield strength and hardness. Also known as Stressproof, these rods are stress-relieved to minimize warping during machining.

Also known as Fatigueproof, these rods have enhanced strength and resistance to breaking from repeated impact compared to High-Strength Easy-to-Machine 1144 Carbon Steel Rods.

Precision ground and held to a strict tightness tolerance, these rods are ready for turning in a lathe.

Stronger than low-carbon steel with equally good machinability, 1045 carbon steel is widely used for bolts, studs, and shafts.

For use in high heat, these rods and discs keep their strength in temperatures up to 800° F. They’re hardened for increased abrasion and impact resistance.

Made with vanadium, this alloy steel retains its strength at temperatures up to 1100° F.

Ready for turning in your lathe, these rods are precision ground and held to a strict straightness tolerance.

Also known as Supercut 150™, these rods have been hardened as well as turned and polished, giving them double the elongation of ETD-150 rods.

Also known as chrome steel, 52100 is an extremely hard and wear-resistant material. It’s used for parts such as bearings, bushings, and punches.

While the low carbon content makes 8620 alloy steel easy-to-weld, it's the nickel, chromium, and molybdenum content that provides wear resistance.

Higher levels of carbon and chromium make this 4150 alloy steel more wear-resistant than 4820 alloy steel. Also known as chrome-moly steel, it’s often used for gears, shafts, and ball screws.

A modified version of 4340 alloy steel, this 300M alloy steel combines high yield strength with extreme resistance to cracking. It’s often used to create parts that require both, such as torsion bars and drive shafts.

Made of a chromium-nickel-molybdenum alloy and strengthened with vanadium, this steel is the strongest alloy we offer.

An oversized diameter allows for finishing to your exact requirements.

Ductile cast iron is strong, resilient, and able to handle repeated stress without breaking.

Precision ground and held to a strict straightness tolerance, these rods are ready for turning in your lathe.

Hardened for increased abrasion and impact resistance, these rods are precision ground with a tight diameter tolerance.

An oversized diameter allows for finishing to your exact requirements.

These rods, also known as drill blanks, have an undersized diameter for machining your own drill bits.

Also known as reamer blanks, these rods are hardened for increased abrasion and impact resistance.

Ready for turning in a lathe, these precision-ground rods have a tight diameter tolerance and are held to a strict straightness tolerance.

Also known as cobalt steel, this M42 tool steel maintains its hardness in high-speed cutting applications that generate intense heat. Use it to make tools for cutting extremely hard materials.

All set for turning in your lathe, these precision-ground rods are held to a strict straightness tolerance.

An oversized diameter allows for finishing to your exact requirements.

Made with lower amounts of alloy elements than other tool steels, these W1 rods are highly machinable. Also called drill rods, they are precision ground and held to strict diameter and straightness tolerances.

Hardened to resist impact and abrasion, P20 tool steel is also strong and easy to machine because of its low carbon content.

From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.

Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.

Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

This material machines faster with less wear on cutting tools than standard 316 stainless steel. It's also called Prodec and Project 70+.

2205 stainless steel resists cracking even when faced with a combination of tensile stress, corrosive chemicals, and heat. Also known as duplex stainless steel, it has twice the strength of 316 stainless steel. Use it for high-pressure applications in caustic environments.

With a diameter that’s held to a close tolerance, this material is hardened for increased wear and abrasion resistance.

Ready for turning in your lathe, these rods are precision ground to a tight tolerance.

Suitable for making molds, 420 stainless steel is a hard, wear-resistant material that can be finely polished to a very smooth surface.

Hardened for superior wear resistance, these rods are precision ground to a tight diameter tolerance so they’re ready for turning in a lathe.

With a higher chromium content than 15-5 PH stainless steel, this high-strength 17-4 PH offers better corrosion resistance. It is also known as 630 stainless steel.

Hardened for improved strength and wear resistance, these rods are precision ground to a strict diameter tolerance. Use them for turning applications in your lathe.

Also known as Project 70+, this material machines faster with less wear on cutting tools than standard 17-4 PH stainless steel.

Offering outstanding strength, 15-5 PH stainless steel is often used for gears and shafts.

Able to withstand temperatures up to 2100° F, 330 stainless steel is widely used as components for industrial furnaces, gas turbines, and boilers. It resists cracking when exposed to heating and cooling cycles.