About External and Internal Grip Pullers
More
Adjustable Face-Grip Puller Sets
Also known as steering wheel and flywheel pullers, you can change the bolt configuration on these pullers to fit a variety of tapered hole patterns.
Puller Material | Includes | Each | |
Steel | Adjustable Face-Grip Puller (For Up To 3" OD; 3 1/8" Reach) with 4 1/2” Long Forcing Screw Six Cap Screws (2 of Each: 3/8"-16 x 4" Lg., 5/16"-18 x 4" Lg., and 5/16"-24 x 4" Lg.) Two Washers | 00000000 | 000000 |
Steel | 3 Tension Bolts Hex Head Shaft Screws (3 Each: 3/8“-16 x 2“ Lg., 3/8"-16 x 3-1/4" Lg., 3/8“-16 x 4-1/2“ Lg., 3/8"-24 x 3" Lg., 1/4"-28 x 3" Lg.) Hex Head Shaft Screws (3 Each: 5/16“-18 x 3-1/2" Lg., 5/16"-18 x 4" Lg., 5/16"-24 x 3" Lg., M8 x 45 mm Lg., M8 x 65 mm Lg.) Hex Head Shaft Screws (3 Each: M8 X 90 mm Lg., M10 x 45 mm Lg.) 4 Spindle Protectors for Pullers Adjustable Face-Grip Puller (For Up to 5-9/10" OD; 5-9/10" Reach) with 5-1/8" Long Spindle Nut for Pulling and Pushing | 00000000 | 000000 |
Quick-Hold Reversible Jaw External/Internal Grip Pullers
With reversible jaws that stay aligned, these pullers can quickly grip objects from the outside or inside. They’re often used to pull bearings and pulleys. To grip objects on the outside, attach the jaws with tips facing in. To grip objects from inside, attach the jaws with tips facing out.
Narrow pullers have both narrow jaws and narrow jaw tips to grip objects in tight spaces.
Pullers with a bar keep jaws straight at 90° as you slide them in and out. They won't kick out like the jaws do in caged pullers.
Pullers with spring-loaded jaws lock in place for quick one-hand operation. Spring tension holds the jaws against the object being pulled, so you can tighten the locking nut.
Two-jaw pullers have a slimmer profile than pullers with more jaws, so they fit in tighter spaces. Three-jaw pullers are more stable and more evenly distribute pulling force than two-jaw pullers. Use them when space allows. Combination 2/3-jaw pullers have mounting holes in both a two-jaw and three-jaw configuration, so you can attach the jaws either way. Lift up the base to add or remove jaws.
Capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
For technical drawings and 3-D models, click on a part number.
Pullers | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw Tip | Forcing Screw | Replacement Forcing Screws | |||||||||||
For ID | For OD | Reach | Capacity, tons | Puller Material | Forcing Screw Material | Wd. | Thick. | Overall Lg. | Thread Size | Each | Each | ||
Standard Profile—Bar Control | |||||||||||||
Two Jaws with Tips on One End | |||||||||||||
3 3/4"-6 1/4" | 1/2"-5" | 3 7/8" | 5 | Steel | Steel | 13/16" | 1/8" | 7 1/4" | M14 x 1.5 mm | 0000000 | 0000000 | 000000 | 00 |
4"-4 3/4" | 1/4"-3 1/2" | 3 7/8" | 5 | Steel | Steel | 13/16" | 1/8" | 7 1/4" | M14 x 1.5 mm | 0000000 | 000000 | 000000 | 00 |
4"-8 3/4" | 1/2"-6 1/4" | 5 7/8" | 10 | Steel | Steel | 15/16" | 3/16" | 10" | 1/2"-14 | 0000000 | 000000 | 000000 | 00 |
4"-10 1/4" | 1/2"-7 3/4" | 5 7/8" | 10 | Steel | Steel | 15/16" | 3/16" | 10" | 1/2"-14 | 0000000 | 000000 | 000000 | 00 |
7"-13 1/2" | 0"-9 3/4" | 7 7/8" | 12 | Steel | Steel | 1 3/8" | 5/32" | 13 1/4" | 3/4"-14 | 0000000 | 000000 | 000000 | 00 |
7"-17 1/4" | 0"-13 3/4" | 7 7/8" | 12 | Steel | Steel | 1 3/8" | 5/32" | 13 1/4" | 3/4"-14 | 0000000 | 000000 | 000000 | 00 |
7 3/4"-23 1/4" | 1/2"-20 1/2" | 11 7/8" | 15 | Steel | Steel | 1 3/8" | 5/32" | 17 3/4" | 1"-11 | 0000000 | 00000000 | 000000 | 00 |
Three Jaws with Tips on One End | |||||||||||||
2 3/4"-5 1/2" | 0"-3 1/2" | 3 7/8" | 6 1/2 | Steel | Steel | 13/16" | 1/8" | 6 1/4" | M14 x 1.5 mm | 0000000 | 000000 | 000000 | 00 |
2 3/4"-7" | 0"-5" | 3 7/8" | 6 1/2 | Steel | Steel | 13/16" | 1/8" | 6 1/4" | M14 x 1.5 mm | 0000000 | 000000 | 000000 | 00 |
4"-8 3/4" | 0"-6 1/4" | 5 7/8" | 11 1/2 | Steel | Steel | 15/16" | 3/16" | 10" | 1/2"-14 | 0000000 | 000000 | 000000 | 00 |
4"-10 1/4" | 0"-7 3/4" | 5 7/8" | 11 1/2 | Steel | Steel | 15/16" | 3/16" | 10" | 1/2"-14 | 0000000 | 000000 | 000000 | 00 |
7"-13 1/2" | 0"-9 3/4" | 7 7/8" | 13 1/2 | Steel | Steel | 1 3/8" | 5/32" | 13 1/4" | 3/4"-14 | 0000000 | 000000 | 000000 | 00 |
7"-17 1/4" | 4 1/4"-14 3/4" | 7 7/8" | 13 1/2 | Steel | Steel | 1 3/8" | 5/32" | 17 3/4" | 1"-11 | 0000000 | 000000 | 000000 | 00 |
8 3/4"-19 3/4" | 4 1/4"-14 3/4" | 11 7/8" | 16 1/2 | Steel | Steel | 1 3/8" | 5/32" | 17 3/4" | 1"-11 | 0000000 | 00000000 | 000000 | 00 |
8 3/4"-19 3/4" | 4 1/4"-14 3/4" | 19 3/4" | 16 1/2 | Steel | Steel | 1 3/8" | 5/32" | 17 3/4" | 1"-11 | 0000000 | 00000000 | 000000 | 00 |
11"-23 1/2" | 5"-20 1/2" | 19 3/4" | 22 | Steel | Steel | 1 3/8" | 5/32" | 16 3/8" | 1 1/8"-11 | 0000000 | 00000000 | 000000 | 00 |
11 1/2"-29 1/4" | 6"-25 1/2" | 19 3/4" | 22 | Steel | Steel | 1 3/8" | 5/32" | 16 3/8" | 1 1/8"-11 | 0000000 | 00000000 | 000000 | 00 |
Standard Profile—Spring-Loaded Control | |||||||||||||
Combination 2/3 Jaws with Tips on One End | |||||||||||||
3"-4" | 3"-4" | 4" | 2 | Steel | Steel | 9/16" | 3/16" | 8 3/4" | M15 × 2 mm | 0000000 | 000000 | 0000000 | 000000 |
3"-7" | 3"-7" | 7" | 5 | Steel | Steel | 7/8" | 1/4" | 11 3/4" | M18 × 2.5 mm | 0000000 | 000000 | 0000000 | 00000 |
Narrow Profile—Bar Control | |||||||||||||
Two Jaws with Tips on One End | |||||||||||||
2 3/4"-5 1/2" | 1/4"-3 1/2" | 3 7/8" | 4 1/2 | Steel | Steel | 1 3/16" | 1/8" | 7 1/4" | M14 x 1.5 mm | 0000000 | 000000 | 000000 | 00 |
2 3/4"-7" | 1/4"-4 3/4" | 3 7/8" | 4 1/2 | Steel | Steel | 1 3/16" | 1/8" | 7 1/4" | M14 x 1.5 mm | 0000000 | 000000 | 000000 | 00 |
4"-8 3/4" | 3/4"-6 1/4" | 5 7/8" | 9 1/2 | Steel | Steel | 1 1/4" | 5/32" | 10" | 1/2"-14 | 0000000 | 000000 | 000000 | 00 |
4"-10 1/4" | 3/4"-7 3/4" | 5 7/8" | 9 1/2 | Steel | Steel | 1 1/4" | 5/32" | 10" | 1/2"-14 | 0000000 | 000000 | 000000 | 00 |
7"-13 1/2" | 3/4"-9 3/4" | 7 7/8" | 11 1/2 | Steel | Steel | 1 3/8" | 1/4" | 13 1/4" | 3/4"-14 | 0000000 | 000000 | 000000 | 00 |
7"-17 1/4" | 3/4"-13 3/4" | 7 7/8" | 11 1/2 | Steel | Steel | 1 3/8" | 1/4" | 13 1/4" | 3/4"-14 | 0000000 | 000000 | 000000 | 00 |
Three Jaws with Tips on One End | |||||||||||||
2 3/4"-5 1/2" | 1/4"-3 1/2" | 3 7/8" | 6 | Steel | Steel | 1 3/16" | 1/8" | 6 1/4" | M14 x 1.5 mm | 0000000 | 000000 | 000000 | 00 |
2 3/4"-7" | 1/4"-5" | 3 7/8" | 6 | Steel | Steel | 1 3/16" | 1/8" | 6 1/4" | M14 x 1.5 mm | 0000000 | 000000 | 000000 | 00 |
4"-8 3/4" | 3/4"-6 1/4" | 5 7/8" | 11 | Steel | Steel | 1 3/16" | 1/8" | 10" | 1/2"-14 | 0000000 | 000000 | 000000 | 00 |
4"-10 1/4" | 3/4"-7 3/4" | 5 7/8" | 11 | Steel | Steel | 1 3/16" | 1/8" | 10" | 1/2"-14 | 0000000 | 000000 | 000000 | 00 |
7"-13 1/2" | 0"-9 3/4" | 7 7/8" | 13 | Steel | Steel | 1 3/8" | 1/4" | 13 1/4" | 3/4"-14 | 0000000 | 000000 | 000000 | 00 |
Quick-Hold External Grip Pullers
Jaws stay aligned, so you can secure bearings and pulleys quickly. Use these pullers to grip bearings, gears, and wheels from the outside edge to pull them off a shaft.
Pullers with a cage keep the jaws aligned.
Pullers with spring-loaded jaws automatically center their jaws and move in unison, allowing for quick one-handed use. This also prevents the misalignment that can occur with self-locking jaws. Spring tension holds the jaws against the object being pulled.
Pullers with two jaws have a flatter profile than pullers with more jaws, so they can fit in tighter spaces.
Pullers with three jaws are more stable and distribute their pulling force more evenly than pullers with two jaws. Use them when space allows.
Capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
Pullers | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw Tip | Forcing Screw | Replacement Jaws | Replacement Jaw Heads | Replacement Pins | |||||||||||||
For OD | Reach | Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Wd. | Thick. | Overall Lg. | Thread Size | Each | Each | Each | Each | ||||
Cage Control | |||||||||||||||||
1/4"-3 1/4" | 2 1/4" | 1 | Steel | Steel | Steel | 11/32" | 1/8" | 5 1/2" | 5/16"-24 | 000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 |
1/4"-4 1/4" | 3" | 2 | Steel | Steel | Steel | 5/16" | 3/16" | 7" | 3/8"-24 | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
1/2"-5" | 4" | 2 | Steel | Steel | Steel | 5/8" | 3/16" | 9 5/8" | 9/16"-16 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
1/2"-7" | 6" | 6 | Steel | Steel | Steel | 3/4" | 1/4" | 12 3/4" | 5/8"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 |
3/4"-12" | 8" | 12 | Steel | Steel | Steel | 7/8" | 9/32" | 16 1/4" | 3/4"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 |
1"-15" | 9 5/8" | 14 | Steel | Steel | Steel | 1" | 11/32" | 19 1/4" | 3/4"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 |
1 1/2"-30" | 20" | 25 | Steel | Steel | Steel | 25/32" | 13/32" | 26 1/4" | 1 1/8"-14 | 00000000 | 00000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
2 1/4"-15 3/4" | 16" | 12 | Steel | Steel | Steel | 11/16" | 7/16" | 16 1/2" | 3/4"-14 | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
2 1/2"-18" | 12" | 25 | Steel | Steel | Steel | 1 1/4" | 1/2" | 26" | 1 1/8"-14 | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 |
3"-25" | 14" | 35 | Steel | Steel | Steel | 1 7/16" | 11/16" | 31 1/2" | 1 1/4"-14 | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 |
Spring-Loaded Control | |||||||||||||||||
1/2"-3 7/8" | 3 7/8" | 3 | Steel | __ | Steel | 21/32" | 1/8" | 5 3/4" | M12 × 1.5 mm | 00000000 | 00000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
3/4"-4 3/4" | 4 3/4" | 5 | Steel | __ | Steel | 11/16" | 1/8" | 6 7/8" | M14 x 1.5 mm | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
7/8"-6 3/8" | 6 3/8" | 6 | Steel | __ | Steel | 13/16" | 1/8" | 9" | M18 × 1.5 mm | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
7/8"-9 7/8" | 7 7/8" | 7 | Steel | __ | Steel | 1 1/8" | 3/16" | 11" | 5/8"-14 | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
7/8"-11 7/8" | 9 7/8" | 10 | Steel | __ | Steel | 1 1/8" | 3/16" | 12 5/8" | 5/8"-14 | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
7/8"-14 3/4" | 11" | 10 | Steel | __ | Steel | 1 1/8" | 3/16" | 16 5/8" | 5/8"-14 | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
Pullers | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw Tip | Forcing Screw | Replacement Jaws | Replacement Jaw Heads | Replacement Pins | |||||||||||||
For OD | Reach | Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Wd. | Thick. | Overall Lg. | Thread Size | Each | Each | Each | Each | ||||
Cage Control | |||||||||||||||||
1/4"-3 1/4" | 2 1/4" | 1 | Steel | Steel | Steel | 1/4" | 1/8" | 5 1/2" | 5/16"-24 | 00000000 | 0000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
1/4"-4 1/2" | 3" | 2 | Steel | Steel | Steel | 7/16" | 3/16" | 7" | 3/8"-24 | 000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 |
1/2"-5" | 4" | 5 | Steel | Steel | Steel | 5/8" | 3/16" | 9 5/8" | 9/16"-16 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
1/2"-7" | 6" | 10 | Steel | Steel | Steel | 3/4" | 1/4" | 12 3/4" | 5/8"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 |
3/4"-12" | 8" | 17 | Steel | Steel | Steel | 7/8" | 9/32" | 16 1/4" | 3/4"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 |
1"-15" | 9 5/8" | 20 | Steel | Steel | Steel | 1" | 11/32" | 19 1/4" | 3/4"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 |
2"-38" | 26" | 40 | Steel | Steel | Steel | 7/8" | 15/32" | 31 3/4" | 1 1/4"-14 | 0000000 | 00000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
2 1/4"-22" | 16" | 17 | Steel | Steel | Steel | 11/16" | 7/16" | 16 1/2" | 3/4"-14 | 00000000 | 00000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
2 1/2"-18" | 12" | 30 | Steel | Steel | Steel | 1 1/4" | 1/2" | 26" | 1 1/8"-14 | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 |
3"-25" | 14" | 40 | Steel | Steel | Steel | 1 7/16" | 11/16" | 31 1/2" | 1 1/4"-14 | 0000000 | 00000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 |
Spring-Loaded Control | |||||||||||||||||
1/2"-3 7/8" | 3 7/8" | 4 | Steel | __ | Steel | 21/32" | 1/8" | 5 3/4" | M12 × 1.5 mm | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
3/4"-4 3/4" | 4 3/4" | 6 | Steel | __ | Steel | 11/16" | 1/8" | 6 7/8" | M14 x 1.5 mm | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
7/8"-6 3/8" | 6 3/8" | 8 | Steel | __ | Steel | 13/16" | 1/8" | 9" | M18 × 1.5 mm | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
7/8"-9 7/8" | 7 7/8" | 10 | Steel | __ | Steel | 1 1/8" | 3/16" | 11" | 5/8"-14 | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
7/8"-11 7/8" | 9 7/8" | 10 | Steel | __ | Steel | 1 1/8" | 3/16" | 12 5/8" | 5/8"-14 | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
7/8"-14 3/4" | 11" | 10 | Steel | __ | Steel | 1 1/8" | 3/16" | 16 5/8" | 5/8"-14 | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
7/8"-23 5/8" | 13 3/4" | 10 | Steel | __ | Steel | 1 9/32" | 3/16" | 20 5/8" | 5/8"-14 | 00000000 | 00000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
Quick-Hold External Grip Puller Sets
Each puller has a cage around the jaws that keeps them in place for a quick job of gripping bearings and pulleys. Use them to grip bearings, gears, and wheels from the outside edge to pull them off a shaft.
Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Includes | Each | |
5-20 | Steel | Iron | Steel | 2-Jaw Puller (For 1/2"-7" OD) 3-Jaw Puller (For 1"-14" OD) 3-Jaw Puller (For 1/2"-5" OD) 3-Jaw Puller (For 1/2"-7" OD) Forcing Screws T-Handles | 0000000 | 0000000 |
External Grip Pullers
Grip bearings, gears, and wheels from the outside edge to pull them off a shaft.
Pullers with jaw tips on both ends have a different jaw tip size on each end for versatility in fitting bearings, gears, and wheels.
Pullers with combination 2/3 jaws have mounting holes in both a 2-jaw and 3-jaw configuration, so you can attach the jaws either way to suit your application.
Jaw Tip | Adjustment Holes | Forcing Screw | Pullers | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For OD | Reach | Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Wd. | Thick. | No. of | Dia. | Overall Lg. | Thread Size | Each | |
0"-3 3/16" | 3 3/16" | 1 1/2 | Steel | Steel | Steel | 13/32" | 13/64" | 1 | 11/64" | 4.92" | M9 x 1.5 | 00000000 | 000000 |
1/2"-12" | 11" | 13 | Steel | __ | Steel | 1" | 9/16" | 2 | 1/2" | 12 1/2" | 13/16"-16 | 0000000 | 000000 |
1 1/32"-9 7/8" | 8 5/8" | 7 1/2 | Steel | __ | Steel | 15/16" | 45/64" | 2 | 13/32" | 8 21/32" | 1/2"-14 | 00000000 | 000000 |
1 1/2"-15 3/4" | 15 3/4" | 11 | Steel | __ | Steel | 1 3/16" | 25/32" | 3 | 31/64" | 15 3/4" | 3/4"-14 | 00000000 | 000000 |
1 1/2"-19 3/4" | 21" | 13 | Steel | __ | Steel | 1 3/16" | 25/32" | 3 | 31/64" | 15 3/4" | 3/4"-14 | 00000000 | 000000 |
Pullers | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Adjustment Holes | Forcing Screw | Replacement Jaws | |||||||||||
For OD | Reach | Capacity, tons | Puller Material | Forcing Screw Material | Jaw Tip Wd. × Jaw Tip Thick. | No. of | Dia. | Overall Lg. | Thread Size | Each | Each | ||
1/2"-4" | 3 1/4" | 2 | Steel | Steel | 1/4" × 3/16", 1/2" × 1/8" | 2 | 5/16" | 4 7/8" | 3/8"-24 | 0000000 | 000000 | 000000 | 000000 |
1/2"-6" | 3 1/4" | 5 | Steel | Steel | 3/8" × 5/16", 3/4" × 1/4" | 1 | 3/8" | 7" | 9/16"-20 | 0000000 | 000000 | 000000 | 00 |
1/2"-9" | 5" | 7 | Steel | Steel | 1" × 5/16", 1" × 3/8" | 1 | 7/16" | 9" | 11/16"-18 | 0000000 | 000000 | 000000 | 00 |
Jaw Tip | Adjustment Holes | Forcing Screw | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For OD | Reach | Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Wd. | Thick. | No. of | Dia. | Overall Lg. | Thread Size | Each | |
1/2"-3 3/16" | 3 3/16" | 1 1/2 | Steel | Steel | Steel | 7/16" | 13/64" | 1 | 11/64" | 4 9/64" | M9 x 1.5 | 00000000 | 000000 |
1 1/2"-15 3/4" | 15 3/4" | 13 | Steel | __ | Steel | 1 3/16" | 25/32" | 3 | 31/64" | 15 3/4" | 3/4"-14 | 00000000 | 000000 |
1 1/2"-19 3/4" | 19 1/4" | 13 | Steel | __ | Steel | 1 3/16" | 25/32" | 2 | 31/64" | 15 3/4" | 3/4"-14 | 00000000 | 000000 |
Jaw Tip | Adjustment Holes | Forcing Screw | Pullers | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For OD | Reach | Capacity, tons | Puller Material | Forcing Screw Material | Wd. | Thick. | No. of | Dia. | Overall Lg. | Thread Size | Each | |
1 1/32"-11 7/8" | 8 5/8" | 7 1/2 | Steel | Steel | 15/16" | 45/64" | 3 | 31/64" | 8 21/32" | 1/2"-14 | 00000000 | 0000000 |
1 1/2"-15 3/4" | 11 1/32" | 11 | Steel | Steel | 1 3/16" | 11/16" | __ | 1/2" | 12 11/16" | 3/4"-14 | 00000000 | 000000 |
1 1/2"-17 3/4" | 15 3/4" | 11 | Steel | Steel | 1 3/16" | 3/4" | 3 | 1/2" | 16 5/8" | 3/4"-14 | 00000000 | 000000 |
Pullers | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Adjustment Holes | Forcing Screw | Replacement Jaws | |||||||||||
For OD | Reach | Capacity, tons | Puller Material | Forcing Screw Material | Jaw Tip Wd. × Jaw Tip Thick. | No. of | Dia. | Overall Lg. | Thread Size | Each | Each | ||
1/2"-4 3/4" | 3 1/4" | 2 | Steel | Steel | 1/4" × 3/16", 1/2" × 1/8" | 2 | 5/16" | 4 7/8" | 3/8"-24 | 0000000 | 000000 | 000000 | 000000 |
1/2"-7" | 3 1/4" | 5 | Steel | Steel | 3/8" × 5/16", 3/4" × 1/4" | 1 | 3/8" | 7" | 9/16"-20 | 0000000 | 000000 | 000000 | 00 |
1/2"-7" | 5 1/2" | 5 | Steel | Steel | 3/8" × 5/16", 3/4" × 1/4" | 2 | 3/8" | 7" | 9/16"-20 | 0000000 | 000000 | 000000 | 00 |
1 1/32"-11 1/32" | 5 1/8" | 7 1/2 | Steel | Steel | 1 1/32" × 9/32", 3/4" × 9/32" | 1 | 3/8" | 8 21/32" | 1/2"-14 | 00000000 | 000000 | 000000 | 00 |
Quick-Hold Reversible Jaw External/Internal Grip Puller Sets
To quickly grip objects from either the outside or inside, all the pullers in these sets have reversible jaws that stay aligned. The jaws slide along the bar, so the arms are always straight at 90° and won’t kick out like they do in caged pullers. They’re often used to pull bearings and pulleys. To grip objects on the outside, attach the jaws with tips facing in. To grip objects from inside, attach the jaws with tips facing out.
The pullers in these sets can either be used with two or three jaws. Use two jaws for tight spots where three jaws won’t fit. When space allows, pullers with three jaws are more stable and more evenly distribute pulling force compared to pullers with two jaws.
Narrow-profile jaws also have narrow tips for gripping objects in tight spaces.
Capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
Capacity, tons | Puller Material | Forcing Screw Material | Forcing Screw Thread Size | Includes | Each | |
Narrow Profile—Bar Control | ||||||
---|---|---|---|---|---|---|
Combination 2/3 Jaws with Tips on One End | ||||||
5 1/2 | Steel | Steel | M14 x 1.5 mm | Quick-Hold 2-Jaw Reversible External/Internal Grip Puller Three Sets of Narrow-Profile Jaws (For 2 3/4"-7 1/8" ID; For 1 1/16"-5 1/8" OD; 3 15/16"-9 13/16" Reach) Set of Jaw Extensions (3 15/16" Long) Forcing Screws (1 of each: 6 5/16" Long; 9 13/16" Long) 2-to-3 Jaw Converter Grease Plastic Case | 0000000 | 0000000 |
Standard and Narrow Profile—Bar Control | ||||||
Combination 2/3 Jaws with Tips on One End | ||||||
7 1/2 | Steel | Steel | 1/2"-14 | Quick-Hold 2-Jaw Reversible External/Internal Grip Puller One Set of Narrow-Profile Jaws (For 3 7/8"-10 1/4" ID; For 1 3/8"-7 7/8" OD; 5 15/16"-11 13/16" Reach) One Set of Standard-Profile Jaws (For 3 7/8"-10 1/4" ID; For 1 3/8"-7 7/8" OD; 5 15/16"-11 13/16" Reach) Two Sets of Jaw Extensions (5 15/16" Long) Forcing Screws (1 of each: 8 5/16" Long; 14" Long) 2-to-3 Jaw Converter Grease Plastic Case | 0000000 | 00000000 |
Reversible Jaw External/Internal Grip Puller Sets with Locking Storage Box
Complete with a locking storage box, use the pullers in this set to tackle a wide variety of pulling jobs—use pullers to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
Puller Material | Includes | Each | |
Steel | Internal Extractor (for 1/2"-1-7/8" ID; 1-1/2" Reach) Six Cap Screws (3 of each: 3/8"-24 × 3" Lg.; 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller Steel Locking Storage Box (25 3/4" Height; 29 1/2" Width; 10" Depth) 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/4"-6 3/4" ID; For 1/4"-6" OD; 4-3/4" Reach) with Slide Hammer Adjustable Face-Grip Puller (For 3 1/4"-9 5/8" OD) with 6 3/4” Long Forcing Screw Adjustable Face-Grip Puller (For 3/4"-4 1/4" OD) with 4 1/4” Long Forcing Screw Combination 2/3-Jaw External Grip Puller—7 1/2-ton Capacity (For Up To 10 1/2" OD; 5" Reach) Combination 2/3-Jaw External Grip Puller—5 1/2-ton Capacity (For Up To 7" OD; 3 1/4" Reach) Two Sets of Long-Reach Jaws (Three Jaws for 5 1/2-ton Capacity Puller and Three Jaws for 7-ton Capacity Puller) Bearing Separator (1/4"-1 3/4 Spread) Bearing Separator (3/4"-4 1/4" Spread) | 00000000 | 000000000 |
Forcing Screws for Pullers
Make your old puller work like new by replacing worn forcing screws.
For technical drawings and 3-D models, click on a part number.
Thread Size | Lg. | Material | Head Style | Each | |
5/16"-24 | 5 3/8" | Steel | T-Handle | 00000000 | 000000 |
3/8"-24 | 6 7/8" | Steel | T-Handle | 00000000 | 00000 |
9/16"-16 | 10 1/8" | Steel | Hex | 00000000 | 00000 |
5/8"-14 | 12 7/8" | Steel | Hex | 00000000 | 00000 |
3/4"-14 | 16 5/8" | Steel | Hex | 00000000 | 00000 |
3/4"-14 | 19 5/8" | Steel | Hex | 00000000 | 00000 |
1 1/8"-14 | 26 3/8" | Steel | Hex | 00000000 | 000000 |
1 1/4"-14 | 32" | Steel | Hex | 00000000 | 000000 |