For more durability than other adhesive-mount heaters, a thick layer of fiberglass-reinforced silicone rubber encases the heating element. Also known as heat sheets, these heaters permanently adhere to container surfaces to heat contents without direct contact. All require a temperature switch or controller (sold separately) to regulate heat output.

Adhesive-back heaters have a pressure-sensitive adhesive. Adhesive-ready heaters have a plain back and should be installed with a silicone sealant (sold separately).

Note: Do not cut, crease, or overlap these heaters—this will damage the heating element. Use a roller during installation to remove air pockets and ensure direct surface contact. Once heaters have been applied to a surface, they cannot be removed and reused.

For technical drawings and 3-D models, click on a part number.

Also known as foil heaters, these bend around tank corners and edges without damaging the heating element. They permanently adhere to container surfaces to heat contents without direct contact. All have a pressure-sensitive adhesive back for easy installation. Heaters require a temperature switch or controller (sold separately) to regulate heat output.

Note: Do not cut or overlap these heaters—this will damage the heating element. Use a roller during installation to remove air pockets and ensure direct surface contact. Once heaters have been applied to a surface, they cannot be removed and reused.

For technical drawings and 3-D models, click on a part number.