Fixture Plates
Lay the foundation for your fixturing setup. These plates have a grid with evenly spaced threaded holes to install angle brackets and other fixturing components. They’re often used to help secure workpieces for measuring and inspecting. Just like a battleship gameboard, the edges are labeled with letters and numbers, making it easy to identify holes. While these lightweight plates aren’t for machining, you can use them for light fabrication jobs, such as laser marking. All can be attached to your table with clamps (not included), making them easy to remove and swap.
Anodized aluminum plates are often used with coordinate measuring machines (CMMs) and optical comparators. The coating protects them from scratches and wear, even when you’re working with heavy parts.
Plates with mounting holes can be bolted down on fixture tables for more stability than those held down by clamps. Make sure the grid of your plate and table align for precise measurements.
Quick-change adapters fasten to the side of plates, converting them into quick-change fixture plates. Rather than having to clamp or bolt plates down, adapters let you snap them in and out of a magnetic mounting rail.
Holes | Bolt-On Mount | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Parallel Tolerance | No. of | Ctr.-to-Ctr. | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | For Mounting Fastener Thread Size  | Material | Each | |
1/4"-20 Hole Thread Size | ||||||||||||
| 3" | 3" | 1/2" | 0.025" | 21 | 1/2" | Yes | 4 | Counterbored | 1/4"-20 | Anodized Aluminum | 0000000 | 000000 |
| 3" | 6" | 1/2" | 0.025" | 51 | 1/2" | Yes | 4 | Counterbored | 1/4"-20 | Anodized Aluminum | 0000000 | 000000 |
Magnetic Mount | Bolt-On Mount | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Max. Magnetic Pull | No. of Mounting Edges | Mounting Fasteners Included | No. of Mounting Holes | For Mounting Fastener Thread Size | Mounting Hole Ctr-to-Ctr. | Material | Each | |
| 6" | 1" | 1/2" | 3.5 | 1 | Yes | 2 | 10-32 | 5 1/2" | Anodized Aluminum | 0000000 | 0000000 |
| 180mm | 30mm | 13mm | 3.5 | 1 | Yes | 2 | M6 | 147mm | Anodized Aluminum | 0000000 | 000000 |
Quick-Change Fixture Plates
Mounting rails are the home base for your magnetic fixture plates, corner plates, and plates for calibration spheres. Bolt them to your table to secure the dock for your quick-change system hub. Quick-change plate adapters allow you to convert a standard fixture plate into a quick-change fixture plate compatible with the mounting rail.
Magnetic Mount | Bolt-On Mount | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Max. Magnetic Pull, lbs. | For Max. No. of Mounting Edges | Mounting Fasteners Included | No. of Mounting Slots | Mounting Slot Lg. | Mounting Slot Wd. | Material | Each | |
For Inch Plates | |||||||||||
| 18" | 2" | 1/2" | 3.5 | 3 | No | 2 | 5 7/16" | 1/2" | Anodized Aluminum | 0000000 | 0000000 |
| 30" | 2" | 1/2" | 3.5 | 5 | No | 6 | 3 1/8" | 1/2" | Anodized Aluminum | 0000000 | 000000 |
For Metric Plates | |||||||||||
| 540mm | 50mm | 13mm | 3.5 | 3 | No | 3 | 120mm | 13mm | Anodized Aluminum | 0000000 | 000000 |
| 720mm | 50mm | 13mm | 3.5 | 4 | No | 6 | 68mm | 13mm | Anodized Aluminum | 0000000 | 000000 |
Sensor and Reflector Brackets for Conveyors
Mount sensors and reflectors on your conveyor frame.
Bolt-on brackets attach through the top of a conveyor.
Styles E, F, and H have universal mounting holes on their face for bolting your sensors or reflectors to them.
| Style | Wd. | Dp. | Ht. | Mounting Fasteners Included | Features | Each | |
Steel | |||||||
|---|---|---|---|---|---|---|---|
| H | 3.34" | 1.57" | 3.54" | Yes | Universal Mounting Hole Pattern | 00000000 | 000000 |
Straight and L-Brackets for Conveyors
These brackets mount to the frame of a conveyor to hold guide rails and accessories.
Style A have a mounting slot, but you can also drill your own hole to mount at a custom height.
One-piece L-brackets attach to a vertical guide rail or sensor.
Two-piece L-brackets allow for offset mounting and extra clearance between the conveyor and guide rail or sensor.
| Ht. | Thick. | Material | Each | ||
| A | 4 1/2" | 3/16" | Stainless Steel | 0000000 | 000000 |
| A | 7 1/2" | 3/16" | Stainless Steel | 0000000 | 00000 |
| B | 8" | 3/16" | Stainless Steel | 00000000 | 00000 |
| B | 8" | 1/4" | Stainless Steel | 00000000 | 00000 |
| C | 6 1/2" | 3/16" | Stainless Steel | 00000000 | 00000 |
| C | 6 1/2" | 1/4" | Stainless Steel | 00000000 | 00000 |
| C | 8" | 3/16" | Stainless Steel | 00000000 | 00000 |
| D | 11 1/2" | 1/8" | Stainless Steel | 00000000 | 00000 |
| Wd. | Ht. | Thick. | Material | Each | ||
| E | 3 1/4" | 5" | 1/8" | Stainless Steel | 00000000 | 000000 |
| E | 3 1/4" | 7 3/4" | 3/16" | Stainless Steel | 00000000 | 00000 |
| E | 3 1/4" | 7 3/4" | 1/4" | Stainless Steel | 00000000 | 00000 |
| E | 3 3/4" | 5" | 3/16" | Stainless Steel | 00000000 | 00000 |
| E | 3 3/4" | 5" | 1/4" | Stainless Steel | 00000000 | 00000 |
| F | 3 3/16" | 5 5/16" | 1/8" | Stainless Steel | 00000000 | 00000 |
| F | 3 3/16" | 5 5/16" | 1/4" | Stainless Steel | 00000000 | 00000 |
| F | 3 1/4" | 5 5/16" | 3/16" | Stainless Steel | 00000000 | 00000 |
| F | 3 3/4" | 3 1/4" | 1/8" | Stainless Steel | 00000000 | 00000 |
| F | 3 3/4" | 3 1/4" | 3/16" | Stainless Steel | 00000000 | 00000 |
| F | 3 3/4" | 3 1/4" | 1/4" | Stainless Steel | 00000000 | 00000 |
Ht. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Wd. | Ht. | (A) | (B) | Thick. | Material | Each | ||
| G | 3 5/8" | 11 3/4" | 5.85" | 5.85" | __ | Plastic | 0000000 | 000000 |
| H | 3 1/4" | 10 5/8" | 5.30" | 5.3" | 1/8" | Stainless Steel | 0000000 | 00000 |
| H | 3 1/4" | 10 5/8" | 5.30" | 5.3" | 3/16" | Stainless Steel | 00000000 | 00000 |
| H | 3 1/4" | 10 5/8" | 5.30" | 5.3" | 1/4" | Stainless Steel | 00000000 | 00000 |
| J | 3 1/4" | 7 1/2" | 3 3/4" | 3 3/4" | 1/8" | Stainless Steel | 00000000 | 00000 |
| J | 3 1/4" | 7 1/2" | 3 3/4" | 3 3/4" | 3/16" | Stainless Steel | 00000000 | 00000 |
| J | 3 1/4" | 7 1/2" | 3 3/4" | 3 3/4" | 1/4" | Stainless Steel | 00000000 | 00000 |
| J | 3 1/4" | 9 1/32" | 3 3/4" | 5 9/32" | 1/8" | Stainless Steel | 00000000 | 00000 |
| J | 3 1/4" | 9 1/32" | 3 3/4" | 5 9/32" | 3/16" | Stainless Steel | 00000000 | 00000 |
| J | 3 1/4" | 9 1/32" | 3 3/4" | 5 9/32" | 1/4" | Stainless Steel | 00000000 | 00000 |
| K | 3 1/4" | 8 3/4" | 5" | 3 3/4" | 1/8" | Stainless Steel | 00000000 | 00000 |
| K | 3 1/4" | 8 3/4" | 5" | 3 3/4" | 3/16" | Stainless Steel | 00000000 | 00000 |
| K | 3 1/4" | 8 3/4" | 5" | 3 3/4" | 1/4" | Stainless Steel | 00000000 | 00000 |
| K | 3 1/4" | 10 9/32" | 5" | 5 9/32" | 1/8" | Stainless Steel | 00000000 | 00000 |
| K | 3 1/4" | 10 9/32" | 5" | 5 9/32" | 3/16" | Stainless Steel | 00000000 | 00000 |
| K | 3 1/4" | 10 9/32" | 5" | 5 9/32" | 1/4" | Stainless Steel | 00000000 | 00000 |
Mounting Rod Brackets for Conveyors
Brackets mount to the frame of a conveyor to hold mounting rods.
Style B, D, P, and Q brackets have grooves to accept square rods.
Style E, F, G, H, L, and M brackets have knobs for quick adjustments.
Style F brackets have two separate mounting holes.
Style H and M brackets include a spring-loaded rod that attaches to a guide rail. A push on the knob moves the rod and guide rail for fast, consistent adjustment. The spacer can be cut to the length needed for adjustments between two positions.
Style K brackets mount to the top of a conveyor. These brackets grip the rod as the nut on the bottom is tightened.
Style L, M, and N brackets have a swivel head for added versatility when mounting at an angle.
Style P and Q brackets let you mount your rod either horizontally or vertically.
Mounting Slot | Mounting Hole | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | For Rod Dia. | For Rod Wd. | Wd. | Ht. | Ht. (A) | Distance to Rod Ctr. | Mounting Fasteners Included | Wd. | Ht. | Dia. | Ctr.-to-Ctr. | For T-Slot Wd., mm | Each | |
Plastic | ||||||||||||||
For Round Rods | ||||||||||||||
| A | 1/2" | __ | 3.29" | 5.76" | 1.98" | 2.53" | No | 0.41" | 2.64" | __ | __ | __ | 0000000 | 000000 |
| B | 1/2" | __ | __ | __ | __ | 0.78" | No | __ | __ | 0.250" | 1.59" | __ | 0000000 | 00000 |
For Round and Square Rods | ||||||||||||||
| B | 12mm | 10mm | 1.57" | __ | __ | 0.79" | Yes | __ | __ | 0.250" | 1.57" | 8 | 00000000 | 00000 |
Aluminum | ||||||||||||||
For Round Rods | ||||||||||||||
| C | 1/2" | __ | 1.57" | __ | __ | 0.71" | Yes | __ | __ | 0.220" | 1.50" | 8 | 00000000 | 00000 |
| C | 12mm | __ | 1.57" | __ | __ | 0.71" | Yes | __ | __ | 0.220" | 1.50" | 8 | 00000000 | 00000 |
For Round and Square Rods | ||||||||||||||
| D | 1/2" | 3/8" | 0.62" | __ | __ | 0.27" | Yes | __ | __ | 0.200" | 1.06" | 8 | 00000000 | 00000 |
Stainless Steel | ||||||||||||||
For Round Rods | ||||||||||||||
| C | 1/2" | __ | 1.57" | __ | __ | 0.71" | Yes | __ | __ | 0.220" | 1.50" | __ | 00000000 | 00000 |
| C | 12mm | __ | 1.57" | __ | __ | 0.71" | Yes | __ | __ | 0.220" | 1.50" | __ | 00000000 | 00000 |
| E | 1/2" | __ | 2.20" | 5.00" | 4.00" | 1.53" | No | 0.41" | 0.50" | __ | __ | __ | 0000000 | 00000 |
| E | 5/8" | __ | 2.20" | 5.00" | 4.00" | 1.53" | No | 0.39" | 0.50" | __ | __ | __ | 0000000 | 00000 |
Rod | Mounting Slot | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | For Rod Dia. | Wd. | Ht. | Dia. | Distance to Rod Ctr. | Lg. | Material | Thread Size | Max. Adjustment | Mounting Fasteners Included | Wd. | Ht. | Mounting Hole Dia. | Features | Each | |
Plastic | ||||||||||||||||
For Round Rods | ||||||||||||||||
| F | 1/2" | 2.56" | 7.81" | __ | 2.50" | __ | __ | __ | __ | No | 0.43" | 2.09" | __ | __ | 0000000 | 000000 |
| F | 1/2" | 2.56" | 9.78" | __ | 3.43" | __ | __ | __ | __ | No | 0.42" | 1.63" | __ | __ | 0000000 | 00000 |
| F | 5/8" | 2.53" | 7.78" | __ | 2.59" | __ | __ | __ | __ | No | 0.42" | 2.14" | __ | __ | 0000000 | 00000 |
| F | 5/8" | 2.56" | 9.78" | __ | 3.43" | __ | __ | __ | __ | No | 0.42" | 1.63" | __ | __ | 0000000 | 00000 |
| G | 1/2" | 2.89" | 10.25" | __ | 3.55" | __ | __ | __ | __ | No | 0.41" | 3.31" | __ | __ | 0000000 | 00000 |
| H | 3/4" | 2.89" | __ | __ | 3.55" | 9 1/4" | Stainless Steel | 5/16"-18 | 2 1/2" | No | 0.41" | 3.72" | __ | Clip-On Spacer | 0000000 | 000000 |
Stainless Steel | ||||||||||||||||
For Round Rods | ||||||||||||||||
| H | 3/4" | 2.38" | __ | __ | 2.52" | 9 1/4" | Stainless Steel | 5/16"-18 | 2 1/2" | No | 0.41" | 2.25" | __ | Clip-On Spacer | 0000000 | 000000 |
| J | 1/2" | 2.94" | 8.85" | __ | 3.81" | __ | __ | __ | __ | No | 0.41" | 3.31" | __ | __ | 0000000 | 00000 |
| K | 1/2" | __ | __ | 1.32" | 3.50" | __ | __ | __ | __ | Yes | __ | __ | 0.375" | __ | 0000000 | 00000 |
Rod | Mounting Slot | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | For Rod Dia. | Wd. | Ht. | Distance to Rod Ctr. | Lg. | Material | Thread Size | Max. Adjustment | Mounting Fasteners Included | Wd. | Ht. | Features | Each | |
Plastic | ||||||||||||||
For Round Rods | ||||||||||||||
| L | 1/2" | 3.29" | 8.96" | 2.82" | __ | __ | __ | __ | No | 0.41" | 2.64" | __ | 0000000 | 000000 |
| L | 5/8" | 3.28" | 8.95" | 3.33" | __ | __ | __ | __ | No | 0.41" | 3.03" | __ | 0000000 | 00000 |
| M | 3/4" | 3.29" | __ | 1.98" | 9 1/4" | Stainless Steel | 5/16"-18 | 2 1/2" | No | 0.41" | 3.05" | Clip-On Spacer | 0000000 | 000000 |
Stainless Steel | ||||||||||||||
For Round Rods | ||||||||||||||
| M | 3/4" | 2.88" | __ | 2.34" | 9 1/4" | Stainless Steel | 5/16"-18 | 2 1/2" | No | 0.41" | 2.25" | Clip-On Spacer | 0000000 | 000000 |
| N | 1/2" | 3.44" | 8.85" | 3.81" | __ | __ | __ | __ | No | 0.41" | 3.31" | __ | 0000000 | 00000 |
Drip Pan Brackets for Conveyors
Add a drip pan underneath a conveyor with these brackets.
| For Max. Drip Pan Thick. | Wd. | Dia. | Ht. | Ht. (A) | Material | Mounting Fasteners Included | Mounting Hole Dia. | Each | |
| 1/8" | 1.4" | 1.6" | 10" | 2.8" | Plastic, Stainless Steel | No | 0.4" | 0000000 | 000000 |
Package Stops for Roller Conveyors
Add a package stop on a conveyor to control product flow and allow for accumulation.
Bolt-on stops attach to the conveyor frame.
| For Between Frame Wd. | For Overall Wd. | Lg. | Wd. | Ht. | Gauge | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Dia. | Mounting Hole Ctr.-to-Ctr. | Color | Each | |
Powder-Coated Steel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10" | 12" | 1 1/2" | 12" | 1 1/2" | 10 | Yes | 2 | 1/4" | 11" | Blue | 0000000 | 000000 |
| 13" | 15" | 1 1/2" | 15" | 1 1/2" | 10 | Yes | 2 | 1/4" | 14" | Blue | 0000000 | 00000 |
| 16" | 18" | 1 1/2" | 18" | 1 1/2" | 10 | Yes | 2 | 1/4" | 17" | Blue | 0000000 | 00000 |
| 22" | 24" | 1 1/2" | 24" | 1 1/2" | 10 | Yes | 2 | 1/4" | 23" | Blue | 0000000 | 00000 |