We will reply to your message within an hour.
Use these wheels for light grinding, deburring, and sharpening.
Designed to stand up to heavy use, these wheels remove more material than our general purpose grinding wheels.
The perforated honeycomb pattern cuts carbide, ceramics, and glass without the need for cleaning.
The silicon carbide abrasive in these wheels is suspended in rubber for a cushioned grind with light material removal.
Use these wheels for precision grinding on surface, cylindrical, and tool and cutter grinders. They are also known as Type 1 wheels and straight wheels.
A more durable abrasive allows these wheels to remove more material and last longer than Norton General Purpose Grinding Wheels. They are also known as Type 1 wheels and straight wheels.
The special shapes of these wheels provide more clearance than typical straight wheels.
Unlike aluminum oxide wheels, these silicon carbide wheels won’t clog when grinding soft metals.
Typically used with cylindrical, surface, and ID grinders, these wheels are specially designed to grind the inside diameter of workpieces.
The porous bond leaves more space between abrasive grains so heavy amounts of chips and coolant easily flow through.
Made with boron nitride, second in hardness to diamond, these wheels are highly wear resistant and easily cut difficult-to-grind steel parts.
A nickel-coated diamond grit and synthetic resin bond make these wheels extremely hard and wear resistant.
Remove material and shape metal cylindrical forms or parts without the need for centers or fixtures.
Use these wheels for heavy material removal in one spot or along a weld seam. They are also known as Type 1 wheels and snagging wheels.
Quickly remove vinyl, decals, tape, and double-sided molding striping and trim without damaging the surface below.
Wheels remove more material than other grinding wheels with cotton laminate.
A combination of cotton laminate and aluminum oxide abrasive creates a smoother surface than other grinding wheels with similar grits.
A single point removes more material than cleaners with multiple points.
Furnished with multiple points, these clean faster and leave a more uniform finish than single-point cleaners.
A concentrated amount of diamond abrasive produces a finer finish than other multiple-point cleaners.
Swap accessories quickly and safely without tools.
Use these wheels to cut through metal such as iron, stainless steel, and steel.
With an X-shaped arbor hole, these wheels quickly and safely click into X-lock grinders without wrenches or flange nuts.
Made of premium grade abrasives, these wheels make fast, burr-free cuts in stainless steel.
Prevent corrosion and discoloration on stainless steel—these wheels contain less than 0.1% iron, chloride, and sulfur contaminants.
Made of ceramic alumina or a combination of ceramic alumina and zirconia alumina, these wheels last up to ten times longer than standard cutoff wheels when cutting hard metal such as Inconel, Hastelloy, and tool steel.
Make cuts in hard, brittle materials such as firebrick, stone, and concrete.
Made with diamond, the strongest abrasive material, these wheels are extremely hard and wear resistant, so they stand up to ceramics and glass.
Ideal when working across multiple materials, these wheels are specially constructed to cut plastic, fiberglass, concrete, and ceramic, as well as metal.
Run these high-density aluminum oxide wheels at higher speeds than standard cutoff wheels to make quick cuts in aluminum, iron, stainless steel, and steel.
These high-density ceramic or ceramic oxide wheels have two layers of fiberglass mesh reinforcement and last up to twice as long as long-life cutoff wheels when cutting iron, stainless steel, and steel.
Premium-grade abrasive materials and two layers of fiberglass mesh reinforcement give these wheels a longer life than standard cutoff wheels when cutting metal such as iron, stainless steel, and steel.
For quick cuts in stainless steel, run these high-density zirconia alumina wheels at a higher rpm than standard cutoff wheels.
With less than 0.1% iron, chloride, and sulfur contaminants, these wheels prevent corrosion and discoloration on stainless steel.
The combination of ceramic alumina and zirconia alumina in these wheels lasts up to ten times longer than aluminum oxide when cutting hard metal such as Inconel, Hastelloy, and tool steel.
Use these clog-resistant zirconia alumina wheels to make quick cuts in soft metal such as aluminum, brass, and copper.
An extra-fine layer of fiberglass mesh reinforcement allows these wheels to make smoother cuts than standard bench-grinder cutoff wheels when cutting metal such as aluminum, iron, stainless steel, and steel.
These steel wheels have a diamond grit edge, so they last longer than standard bench-grinder cutoff wheels when cutting hard, nonferrous materials such as carbide, ceramics, and glass.
Made with boron nitride, second only in hardness to diamond, these wheels are highly wear resistant, so they easily cut steel with a Rockwell hardness of C50 or greater, including alloy steel, A2, D2, and T15 tool steel.
These wheels are designed to cut stainless steel. They are reinforced with a layer fiberglass mesh.
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.
Designed to cut sheet metal.
These wheels have a blend of aluminum oxide and silicon carbide abrasives for cutting ductile cast iron.
Use these wheels to cut through metal such as iron and steel. They are reinforced with a layer of fiberglass mesh.
The loose weave of the reinforcement material means more of the abrasive grain contacts the metal as you're cutting for a faster cut than standard cutoff wheels.
Cut a variety of materials—from rubber to metal to stone.
Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when aluminum, iron, stainless steel, and steel.
These non-reinforced aluminum oxide wheels create the nearly polished finish required for testing metal.
These wheels have a zirconia alumina abrasive for cutting ductile cast iron.
Make burr-free cuts in hard or thick materials, such as metal pipes, bars, and sheets.
Make burr-free cuts in metal tubing and extrusions, such as strut channels and rails.
These wheels are thinner than standard bench-top cutoff saw wheels, so they cut through aluminum, iron, stainless steel, and steel more quickly.
Make fast, burr-free cuts in stainless steel with these premium aluminum oxide wheels.
These wheels are reinforced with fiberglass mesh and designed to last longer than standard wheels when cutting ductile cast iron.
Use these clog-resistant wheels to make quick cuts in soft metal such as aluminum, brass, and copper.
From stone to rubber to metal—slice through a variety of materials with the same cutoff saw wheel.
Made from bonded silicon carbide abrasives, these wheels slice through titanium, one of the hardest materials to cut.
These steel wheels have a diamond grit edge for making cuts in abrasive materials such as ceramic and tile.
Make cuts in most metal, including aluminum, iron, stainless steel, and steel.
Made of diamond abrasive, these wheels cut ceramics, tile, and other abrasive materials.
A ceramic alumina abrasive cuts through stainless steel.
Use these wheels for cutting soft metal, plastic, stone, and wood.