Designed to stand up to heavy use, these wheels remove more material than our general purpose grinding wheels.

Use these wheels for precision grinding on surface, cylindrical, and tool and cutter grinders. They are also known as Type 1 wheels and straight wheels.

The special shapes of these wheels provide more clearance than typical straight wheels.

The porous bond leaves more space between abrasive grains so heavy amounts of chips and coolant easily flow through.

Use these wheels for heavy material removal in one spot or along a weld seam. They are also known as Type 1 wheels and snagging wheels.

A combination of cotton laminate and aluminum oxide abrasive creates a smoother surface than other grinding wheels with similar grits.

Make fast, burr-free cuts in stainless steel with these ceramic and zirconia alumina wheels.

Made of a combination of ceramic alumina and zirconia alumina, these wheels last up to ten times longer than standard cutoff wheels when cutting hard metal such as Inconel, Hastelloy, and tool steel.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete.

Run these high-density aluminum oxide wheels at higher speeds than standard cutoff wheels to make quick cuts in aluminum, iron, stainless steel, and steel.

These high-density ceramic oxide wheels have two layers of fiberglass mesh reinforcement and last up to twice as long as long-life cutoff wheels when cutting aluminum, iron, stainless steel, and steel.

Use these clog-resistant zirconia alumina wheels to make quick cuts in soft metal such as aluminum, brass, and copper.

These steel wheels have a diamond grit edge, so they last longer than standard bench-grinder cutoff wheels when cutting hard, nonferrous materials such as carbide, ceramics, and glass.

An extra-fine layer of fiberglass mesh reinforcement allows these wheels to make smoother cuts than standard bench-grinder cutoff wheels when cutting metal such as aluminum, iron, stainless steel, and steel.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete.

These wheels are designed to cut stainless steel. They are reinforced with a layer fiberglass mesh.

Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when aluminum, iron, stainless steel, and steel.

These wheels have a zirconia alumina abrasive for cutting ductile cast iron.

Designed to cut sheet metal.

Use these wheels to cut through metal such as iron and steel. They are reinforced with a layer of fiberglass mesh.

Use these clog-resistant wheels to make quick cuts in soft metal such as aluminum, brass, and copper.

Make fast, burr-free cuts in stainless steel with these premium aluminum oxide wheels.

Make cuts in most metal, including aluminum, iron, stainless steel, and steel.