McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    62 Products

    Fixture Tables for Welding

    Image of System. Front orientation. Fixture Tables. Fixture Tables for Welding.
    Use these tables as a foundation for welding setups. They have 5/8" unthreaded holes with 2" center-to-center spacing, so they’re compatible with clamps, stops, V-blocks, and other components. To protect tables and other components from heat and spatter, coat them in welding antispatter.
    Tables
    Image of Product. Front orientation. Fixture Tables. Fixture Tables for Welding, Tables, Slotted.
    Image of Product. Front orientation. Fixture Tables. Fixture Tables for Welding, Tables, Cart.

    Slotted

    Cart

    Slotted—Slotted tables have reversible plates—when one side becomes worn or damaged, flip them over for a fresh work surface. Swap in a replacement plate when both sides wear down. They’re also precision ground. These tables have leveling feet, which you can adjust up or down to compensate for uneven floors. Slotted tables have space between each plate to give you more clamping options.
    Cart—A versatile addition to any workspace, these heavy duty steel tables combine mobility, stability, and storage. Roll them anywhere in your shop on the swivel casters, then lock into place with the heel brake. Lower the leveling feet to lift the casters off the ground for a stable, level surface, even on slightly sloped and pitted floors. Integrated shelves, racks, and a pegboard panel organize tools and keep them within reach. Clean up slag while you work by scraping it into the built-in retractable trays.
    Nitride-Coated Steel Plate—Both sides of these plates are surface ground for flatness and nitrided to resist rust, scratches, and weld spatter. They have long lifespans and require minimal maintenance.
    Fixture Tables
    Replacement
    Top Plates
    Overall
    Slots
    Plates
    Holes
    Lg.
    Wd.
    Ht.
    Load Cap.,
    lb.
    No.
    of
    Wd.
    Ctr.-to-Ctr.
    No.
    of
    Wd.
    Thk.
    No. per
    Plate
    Dia.
    Ctr.-to-Ctr.
    Flatness
    Tolerance
    Material
    Plate Material
    Features
    Each
    Each
    Slotted
    38"22"36"2,00022"8"36 1/4"5/8"575/8"2"0.01"/2 ft.SteelNitride-Coated SteelLeveling Feet1403N130000000001403N210000000
    46"38"36"5,00052"8"66 1/4"5/8"575/8"2"0.01"/2 ft.SteelNitride-Coated SteelLeveling Feet1403N12000000001403N21000000
    78"38"36"5,50092"8"106 1/4"5/8"575/8"2"0.01"/2 ft.SteelNitride-Coated SteelLeveling Feet1403N11000000001403N21000000
     
    Cart
    48"30"36"1,500———130"5/8"3605/8"2"0.018"/3 ft.SteelNitride-Coated SteelLeveling Feet, Pegboard Panel, Racks, Slag Trays1403N2500000000———0
    48"48"36"1,500———148"5/8"5765/8"2"0.018"/3 ft.SteelNitride-Coated SteelLeveling Feet, Pegboard Panel, Racks, Slag Trays1403N2600000000———0
    60"30"36"1,500———130"5/8"4505/8"2"0.018"/3 ft.SteelNitride-Coated SteelLeveling Feet, Pegboard Panel, Racks, Slag Trays1403N2700000000———0
     
    Hold-Down Clamps
    Image of Product. Front orientation. Contains Annotated. Fixture Tables. Fixture Tables for Welding, Hold-Down Clamps.
    Hold-down clamps secure work anywhere on the table's surface. The arm slides up and down freely so the clamp can be quickly moved into position. Once in place, use the handle for final tightening.
    Clamping
    Surface
    Material
    Max. Clamping
    Clearance
    Reach
    Lg.
    Holding
    Cap., lb.
    For Hole
    Size
    Type
    Material
    Texture
    Body
    Handle
    Each
    8 1/2"4"4005/8"Swivel PadSteelSmoothSteelSteel1403N87000000
     
    Side Clamps
    Image of Product. Front orientation. Contains Annotated. Fixture Tables. Fixture Tables for Welding, Side Clamps.
    Side clamps apply pressure to hold work from the side.
    Lg.
    Ht.
    Stud
    Dia.
    Material
    Spindle
    Material
    Each
    3 1/2"2"5/8"Black-Oxide SteelAluminum
    		1403N62000000
     
    Risers
    Image of Product. Front orientation. Fixture Tables. Fixture Tables for Welding, Risers, Fixed Height.

    Fixed Height

    Image of Product. Front orientation. Fixture Tables. Fixture Tables for Welding, Risers, Adjustable Height.

    Adjustable Height

    Risers hold components above the surface of the table. A 5/8” hole at the top lets you attach a component, such as a V-block, to the riser.
    Head
    Dia.
    Ht.
    Hole
    Dia.
    Stud
    Dia.
    Material
    Each
     
    Fixed Height
    1 9/16"15/32"5/8"5/8"Black-Oxide Steel1403N6300000
    1 5/8"2"5/8"5/8"Black-Oxide Steel1403N6400000
     
    Adjustable Height
    1 3/4"7/8" to 1 3/16"5/8"5/8"Black-Oxide Steel1403N6600000
    1 3/4"2" to 2 3/4"5/8"5/8"Black-Oxide Steel1403N6500000
     
    Flat Rests
    Image of Product. Front orientation. Fixture Tables. Fixture Tables for Welding, Flat Rests.
    Flat rests raise the workpiece off the table.
    Head
    Dia.
    Ht.
    Stud
    Dia.
    Material
    Each
    1"2"5/8"Black-Oxide Steel1403N6100000
    1 5/8"5/8"5/8"Black-Oxide Steel1403N5100000
     
    Right-Angle Brackets
    Image of Product. Front orientation. Contains Annotated. Fixture Tables. Fixture Tables for Welding, Right-Angle Brackets.
    Right-angle brackets hold work at a precise 90° angle.
    Slots
    Holes
    Lg.
    Wd.
    Ht.
    No.
    of
    Lg.
    Wd.
    No.
    of
    Dia.
    Ctr.-to-Ctr.
    Material
    Each
    3 5/8"1 3/16"1 5/8"12"5/8"15/8"—Black-Oxide Steel1403N41000000
    3 5/8"1 3/16"3 5/8"12"5/8"35/8"1"Black-Oxide Steel1403N4200000
    6"1 3/16"3 5/8"15"5/8"35/8"1"Black-Oxide Steel1403N4300000
    6"2"12"15"5/8"115/8"1"Black-Oxide Steel1403N45000000
     
    Straightedge Stops
    Image of Product. Front orientation. Fixture Tables. Fixture Tables for Welding, Straightedge Stops, 6" Long.
    Image of Product. Front orientation. Contains Annotated. Fixture Tables. Fixture Tables for Welding, Straightedge Stops, 8" Long.
    Image of Product. Front orientation. Contains Annotated. Fixture Tables. Fixture Tables for Welding, Straightedge Stops, 10" Long.

    6" Long

    8" Long

    10" Long

    Straightedge stops mount to the table to create a reliable straightedge for alignment.
    Slots
    Holes
    Lg.
    Wd.
    Ht.
    No.
    of
    Lg.
    Wd.
    No.
    of
    Dia.
    Ctr.-to-Ctr.
    (A)
    Ctr.-to-Ctr.
    (B)
    Material
    Each
    6"1 3/16"1/2"13 1/2"5/8"15/8"——Black-Oxide Steel1403N31000000
    8"1 3/16"1/2"22"5/8"25/8"4"—Black-Oxide Steel1403N3200000
    10"1 3/16"1/2"15"5/8"45/8"7"1"Black-Oxide Steel1403N3300000
     
    Toggle Clamp Mounting Plates
    Image of Product. Front orientation. Contains Annotated. Fixture Tables. Fixture Tables for Welding, Toggle Clamp Mounting Plates.
    Toggle clamp mounting plates let you position a toggle clamp anywhere on the table.
    Plate
    Mounting
    Holes
    Lg.
    Wd.
    Ht.
    No.
    of
    Thread
    Size
    Stud
    Dia.
    Material
    Each
    2 3/4"2 3/8"5/8"4, 4M5, M65/8"Steel1365N31000000
     
    Fasteners
    Image of System. Fastener and Straightedge Stops. Front orientation. Fixture Tables. Fixture Tables for Welding, Fasteners.

    Fastener and

    Straightedge

    Stops

    Image of Product. Front orientation. Fixture Tables. Fixture Tables for Welding, Fasteners, Shoulder Screw.

    Shoulder

    Screw

    Image of Product. Bottom orientation. Fixture Tables. Fixture Tables for Welding, Fasteners, Ball-Lock Screw.

    Ball-Lock

    Screw

    Fasteners connect components to each other or to the table.
    Thread
    Head
    Drive
    Each
    Package
    Shoulder
    Lg.
    Size
    Lg.
    Dia.
    Ht.
    Lg.
    Size
    Style
    Material
    Includes
    Each
    Pkg.
    Qty.
    Pkg.
    Shoulder Screw—5/8" Diameter Shoulder (-0.001" to 0")
    1/2"1/2"-13
    		3/4"7/8"3/8"—5/16"Hex
    		Black-Oxide SteelNut, Washer1403N7200000————0
    3/4"1/2"-13
    		3/4"7/8"3/8"—5/16"Hex
    		Black-Oxide SteelNut, Washer1403N730000————0
    7/8"1/2"-13
    		3/4"7/8"3/8"—5/16"Hex
    		Black-Oxide SteelNut, Washer1403N740000————0
    1"1/2"-13
    		3/4"7/8"3/8"—5/16"Hex
    		Black-Oxide SteelNut, Washer1403N750000————0
    1 1/4"1/2"-13
    		3/4"7/8"3/8"—5/16"Hex
    		Black-Oxide SteelNut, Washer1403N760000————0
     
    Ball-Lock Screw—5/8" Diameter Stud
    ———7/8"1/2"7/8" to 1 1/16"1/4"Hex
    		Steel—1403N6900000121403N710000000
     
    Fixture Squares
    Image of Product. Style A. Front orientation. Fixture Squares. 2" Long, 2" Wide.
    Image of Product. Style B. Front orientation. Contains Annotated. Fixture Squares. 3 3/4" Long, 4" Wide.
    Image of Product. Style C. Front orientation. Contains Annotated. Fixture Squares. 4" Long, 4" Wide.

    Style A

    Style B

    Style C

    Image of Product. Style D. Front orientation. Contains Annotated. Fixture Squares. 4" Long, 8" Wide.
    Image of Product. Style E. Front orientation. Contains Annotated. Fixture Squares. 6" Long, 2" Wide.
    Image of Product. Style F (Left Orientation). Front orientation. Contains Annotated. Fixture Squares. 8" Long, 2" Wide, Left-Hand-Side Orientation.

    Style D

    Style E

    Style F (Left

    Orientation)

    Image of Product. Style F (Right Orientation). Back orientation. Contains Annotated. Fixture Squares. 8" Long, 2" Wide, Right-Hand-Side Orientation.

    Style F (Right Orientation)

    Build fixtures on multiple sides of these squares—you can use them individually or stack them.
    Slots
    Holes
    Tolerance
    Style
    Lg.
    Wd.
    Ht.
    Orientation
    No.
    of
    Style
    Lg.
    Wd.
    No.
    of
    Dia.
    Ctr.-to-Ctr.
    (A)
    Ctr.-to-Ctr.
    (B)
    Wt.,
    lb.
    Squareness
    per 4"
    Parallel
    Material
    Each
    A2"2"10"—————205/8"1"—50.001"0.002"Nitride-Coated Steel1392N110000000
    B3 3/4"4"3 3/4"—4
    1    		Straight
    Curved    		2"
    2 13/16"    		5/8"
    5/8"    		65/8"2"—5Not RatedNot RatedIron1392N111000000
    C4"4"4"—2Straight2 3/16"5/8"215/8"2"1 7/16"80.001"0.002"Nitride-Coated Steel1392N12000000
    C4"4"8"—2Straight2"5/8"395/8"2"1 7/16"130.001"0.002"Nitride-Coated Steel1392N13000000
    C4"4"12"—2Straight2"5/8"575/8"2"1 7/16"180.001"0.002"Nitride-Coated Steel1392N14000000
    D4"8"24"—2
    4
    2    		Straight
    Straight
    Straight    		4"
    2"
    4"    		5/8"
    5/8"
    5/8"    		1575/8"2"2"53Not RatedNot RatedNitride-Coated Steel1392N11200000000
    D4"8"36"—2
    4
    2    		Straight
    Straight
    Straight    		4"
    2"
    4"    		5/8"
    5/8"
    5/8"    		2355/8"2"2"77Not RatedNot RatedNitride-Coated Steel1392N11300000000
    E6"2"12"—2Straight4"5/8"265/8"1"1"70.002"0.006"Iron1392N15000000
    F8"2"20"Left-Hand Side4
    2
    1    		Straight
    Curved
    Curved    		2"
    2 13/16"
    5 5/8"    		5/8"
    5/8"
    5/8"    		435/8"1"1"15Not RatedNot RatedIron1392N115000000
    F8"2"20"Right-Hand Side4
    2
    1    		Straight
    Curved
    Curved    		2"
    2 13/16"
    5 5/8"    		5/8"
    5/8"
    5/8"    		435/8"1"1"15Not RatedNot RatedIron1392N114000000
    V-Blocks
    Mount V-blocks to the table to hold round workpieces in place.
    Multiple Studs—V-blocks with multiple studs slot into at least two grid holes, which keeps them from shifting when you move workpieces in or out. They have two rows of mounting holes, so you can position them at a 45° or 90° angle on your grid.
    Pivoting—Pivoting V-blocks can hold both the outer and inner diameter of your workpiece. They can go from cradling the outside of a pipe at 60°, to lying completely flat, to gripping the inside of a pipe at a 60° angle.
    Head
    For Max. Workpiece
    Dia.
    Dia.
    Lg.
    Wd.
    Ht.
    Lg.
    Wd.
    Ht.
    V
    Angle
    V Dp.
    V Wd.
    Stud
    Dia.
    Material
    Machinable
    Includes
    Each
    Single Stud
     
    Image of Product. Fixed with Single Stud. Front orientation. Contains Annotated. V-Blocks. Single Stud, Fixed.

    Fixed with Single Stud

    Fixed
    2 1/2"1 5/8"——21/32"———120°13/32"1 7/16"5/8"Black-Oxide SteelNo—1403N67000000
    8"3 3/16"——1 13/32"———150°19/32"3 1/16"5/8"Black-Oxide SteelNo—1403N6800000
     
    Image of Product. Pivoting with Single Stud. Front orientation. Contains Annotated. V-Blocks. Single Stud, Pivoting.

    Pivoting with Single Stud

    Pivoting
    4"—2 1/8"2"1 1/8"———60°27/32"1"5/8"Zinc-Plated SteelNo—1365N2100000
     
    Pair
    Multiple Studs
     
    Image of Product. Fixed with Multiple Studs. Front orientation. Contains Annotated. V-Blocks. Multiple Studs, Fixed.

    Fixed with Multiple Studs

    Fixed
    4"————8 1/4"2 1/4"2"120°1/2"1 11/16"5/8"Black-Oxide SteelNoFour Mounting Studs8907N111000000
     

    V-Blocks for Welding

    Image of ProductInUse. Front orientation. V-Blocks. V-Blocks for Welding.
    Mount these V-blocks to grids on welding tables or plates to hold round workpieces in place. Their 5/8" dia. studs are sized to fit industry-standard mounting holes.
    Single Stud
    Image of ProductInUse. Pivoting V-Blocks Shown In Use. Front orientation. ZoomedIn view. V-Blocks. V-Blocks for Welding, Single Stud, Pivoting V-Blocks.
    Image of Product. Front orientation. Contains Annotated. V-Blocks. V-Blocks for Welding, Single Stud, Fixed V-Blocks.
    Image of Product. Front orientation. Contains Annotated. V-Blocks. V-Blocks for Welding, Single Stud, Pivoting V-Blocks.

    Pivoting V-Blocks Shown In

    Use

    Fixed V-Blocks

    Pivoting V-Blocks

    Pivoting V-Blocks—Pivoting V-blocks can hold both the outer and inner diameter of your workpiece. They can go from cradling the outside of a pipe at 60°, to lying completely flat, to gripping the inside of a pipe at a 60° angle.
    Head
    For Max. Workpiece
    Dia.
    Dia.
    Lg.
    Wd.
    Ht.
    V
    Angle
    V Dp.
    V Wd.
    Stud
    Dia.
    Material
    Machinable
    Each
     
    Fixed V-Blocks
    2 1/2"1 5/8"——21/32"120°13/32"1 7/16"5/8"Black-Oxide SteelNo1403N67000000
    8"3 3/16"——1 13/32"150°19/32"3 1/16"5/8"Black-Oxide SteelNo1403N6800000
     
    Pivoting V-Blocks
    4"—2 1/8"2"1 1/8"60°27/32"1"5/8"Zinc-Plated SteelNo1365N2100000
     

    Drop-In Bar-Style Hold-Down Clamps for Workholding Tables

    Image of ProductInUse. Front orientation. Bar Clamps. Drop-In Bar-Style Hold-Down Clamps for Workholding Tables.
    Image of Product. Front orientation. Contains Annotated. Bar Clamps. Drop-In Bar-Style Hold-Down Clamps for Workholding Tables, For Round Holes.

    For Round Holes

    The base fits into holes on most workholding and welding tables for clamping anywhere on the work surface. The clamping arm slides freely along the bar for quick positioning. Use the handle for final tightening.
    For
    Hole
    Max. Clamping
    Clearance
    Reach
    Lg.
    Holding
    Cap., lb.
    Size,
    mm
    Shape
    Body
    Material
    Arm
    Material
    Screw
    Material
    Each
    8"4"65016RoundSteelSteelSteel1365N11000000

    Parallel Straightedges

    Image of Product. Front orientation. Straightedges. Parallel Straightedges.
    Level machinery, check surface flatness, and scribe work positions. The top and bottom faces are precision ground within 0.0001" per 12".
    Lg.
    Wd.
    Ht.
    Wt.,
    lb.
    Tolerance
    per ft.
    Each
    Inch
    24"1"2"100.0001"2213A10000000
    36"1 1/2"3"270.0001"2213A200000000
    48"1 1/2"3"360.0001"2213A300000000
    72"2"4"1100.0001"2213A500000000
     

    Fixturing for Parts Inspection

    Image of ProductInUse. Front orientation. Coordinate Measuring Machine Plates and Fixtures. Fixturing for Parts Inspection.
    From towers and brackets to standoffs and supports, these components are the building blocks for your custom fixturing setup. They elevate parts so you can access a variety of angles for measuring and inspecting while protecting your measuring device from hitting the inspection table. You’ll often see them used with coordinate measuring machines (CMMs). They’re not for use in machining applications.
    Standoffs
    Image of Product. Front orientation. Coordinate Measuring Machine Plates and Fixtures. Fixturing for Parts Inspection, Standoffs.
    Standoffs raise the height of towers and angle brackets or extend the reach of supports and clamps. Screw them into one another for added length.
    Dia.,
    mm
    Ht.,
    mm
    Thread
    Lg., mm
    Material
    Each
    M4 × 0.7 mm Threads
     
    Fixed Standoff Height
    12253.8Steel1409N54000000
     
    M6 × 1 mm Threads
     
    Fixed Standoff Height
    13106.2Steel1409N5200000
    13256.2Steel1409N5500000
    13506.2Steel1409N5700000
    13756.2Steel1409N5800000
     
    M8 × 1.25 mm Threads
     
    Fixed Standoff Height
    13157.7Steel1409N5300000
    13257.5Steel1409N5600000
     
    Magnetic Supports
    Image of ProductInUse. Side1 orientation. Coordinate Measuring Machine Plates and Fixtures. Fixturing for Parts Inspection, Magnetic Supports.
    Image of Product. Bottom orientation. Coordinate Measuring Machine Plates and Fixtures. Fixturing for Parts Inspection, Magnetic Supports.
    Magnetic supports securely raise and hold metal parts, no clamps required.
    Dia.
    Ht.
    Thread
    Lg.
    Max. Magnetic
    Pull, lbf
    Material
    Each
    1/4"-20 Threads
    1/2"1"1/4"9Steel1409N59000000
     
    M6 × 1 mm Threads
    13 mm25 mm6.2 mm9Steel1409N6100000
     
    Magnetic V-Supports
    Image of ProductInUse. Side1 orientation. Coordinate Measuring Machine Plates and Fixtures. Fixturing for Parts Inspection, Magnetic V-Supports.
    Image of Product. Bottom orientation. Coordinate Measuring Machine Plates and Fixtures. Fixturing for Parts Inspection, Magnetic V-Supports.
    Magnetic V-supports have a notch to cradle metal cylindrical workpieces, like a spoon rest.
    Dia.
    Ht.
    V Wd.
    V Dp.
    V
    Angle
    Thread
    Lg.
    Max. Magnetic
    Pull, lbf
    Material
    Each
    1/4"-20 Threads
    1"1"1"1/4"120°1/4"16Steel1409N620000000
     
    M6 × 1 mm Threads
    13 mm25 mm13 mm3.6 mm120°6.3 mm9Steel1409N6300000
     

    Adjustable-Height Fixture Tables for Welding

    Raise or lower these tables to the perfect height. Similar to a scissor lift, control them with a simple foot pedal. Tables are hydraulically powered and lock in position with a safety pin. The heavy duty casters let you roll tables where needed. They also lock so tables don’t move during use. Add components such as clamps, brackets, stops, rests, mounting plates, fixturing squares, risers, and V-blocks to build fixtures.
    Tables
    Image of Product. Front orientation. Fixture Tables. Adjustable-Height Fixture Tables for Welding, Tables.
    Nitride-Coated Steel Plate—Both sides of these plates are surface ground for flatness and nitrided to resist rust, scratches, and weld spatter. They have long lifespans and require minimal maintenance.
    Overall
    Plates
    Holes
    Lg.
    Wd.
    Ht.
    Dynamic
    Load Cap., lb.
    Static Load
    Cap., lb.
    Elevation
    per Stroke
    No.
    of
    Wd.
    Thk.
    No. per
    Plate
    Dia.
    Ctr.-to-Ctr.
    Flatness
    Tolerance
    Material
    Plate Material
    Wheel Configuration
    Features
    Each
    48"30"25" to 40"4006001"130"5/8"3605/8"2"0.012"/3 ft.SteelNitride-Coated SteelTwo Rigid Casters and Two Swivel CastersLocking Pin8305N1000000000

    Setup and Fixture Clamp Kits for Welding

    Image of ProductInUse. Front orientation. Fixture Kits. Setup and Fixture Clamp Kits for Welding.
    Image of Product. 66-Piece Kit. Front orientation. Fixture Kits. Setup and Fixture Clamp Kits for Welding.

    66-Piece Kit

    Hold and position workpieces on your welding fixture table. These kits include all the clamps, locating pins, and other components you need for most welding setups.
    For Hole
    Dia.
    No. of
    Pieces
    Includes
    Material
    Each
    5/8"662 Hold-Down Clamps with 6-1/2" Maximum Clamping Clearance
    4 Locking Plier Clamps (2 each with 2 1/4" and 3 1/4" Reach)
    2 Side Clamps
    2 Locating Pins
    10 Ball-Lock Screws
    8 V-Blocks
    2 Magnetic Top V-Pads
    8 Straightedge Stops
    8 Flat Rests
    4 Risers
    12 Magnetic Risers
    4 Right-Angle Brackets    		Steel8536N120000000
     
    back to top