We will reply to your message within an hour.
More
Also known as hook-up wire, this wire is primarily used for wiring electrical panels, lighting, and plant floor equipment.
This wire meets stringent military specifications for material quality.
Keep spools of wire in multiple colors on hand.
Maintain a supply of Mil. Spec. wire in multiple colors.
More flexible than standard wire, this wire is often used for internal appliance wiring and machine tools. Also known as MTW wire.
Use this wire in ovens, furnaces, and other electrical heating equipment where temperatures reach 480° F and higher.
Rated to 50 volts AC/DC, this wire is often used in small electronics and robotics. It withstands temperatures of 390° F and greater.
A durable insulation withstands abrasion, so this wire can be pulled over rough surfaces.
Our most chemical-resistant wire—the PTFE insulation protects against most chemicals, solvents, and oil.
The PEEK insulation on this wire won't degrade when exposed to radiation, and is often used in nuclear energy production.
Nearly half the diameter and up to 40% lighter than standard wire of the same gauge and voltage, this wire fits in tight spaces.
Use this wire in high-voltage applications that require 10,000 volts DC or greater, such as in high-power signs and lasers.
Often used in mining applications, treatment plants, and motors, this wire withstands 5,000 volts AC/DC.
Eliminate tangles—the slippery insulation on this wire won't catch on itself, other wires, or on rough surfaces.
When pulled lengthwise, this unshielded wire extends 40% and then returns to its original length, so it's useful for high-vibration applications.
The shielding in this wire blocks signal interference from nearby equipment and devices. When pulled lengthwise, it extends 40% and then returns to its original length, so it's useful for high-vibration applications.
Install this wire in conduit and cable trays throughout commercial and industrial buildings. It's also known as branch circuit wire.
Also known as primary wire, this wire meets SAE standards for low-voltage wiring in trucks, boats, trailers, and other vehicles.
Connect batteries in vehicles and generators.
Keep spools of vehicle wire in multiple colors on hand.
Often used in automated applications such as robotics, this wire withstands continuous motion without degrading data or signal transmission.
The thin strands in this wire have better fatigue resistance under repeated flexing than the strands in standard continuous-flex wire, so it will last longer.
Use this wire in automated applications that require 14,000 volts A/C or greater. It withstands continuous motion without degrading data or signal transmission.
The TPE insulation on this wire resists most chemicals, including oil and coolant, and withstands continuous motion.
Protected by an insulation that resists UV light and water, this wire is often used outdoors for lighting and generators.
Also known as photovoltaic (PV) wire, this wire is often used in solar panels and resists damage from UV light. It withstands 2,000 volts AC/DC.
Assortments include wire in multiple lengths and colors.
Make connections in circuit boards with these short lengths of terminated wire.
Use this general purpose cable to supply power to equipment.
After extending to full length to provide added reach, this cable retracts and self-coils for tangle-free storage. It's often used with hand tools and other portable devices.
This cable can be stretched by about 40% and return to its original length, making it useful for applications where cable is in motion. It's often sewn into garments or used with equipment that must be worn.
Rated to 12 volts DC, this cable is often used in low-voltage applications such as battery and vehicle wiring and radios. Also known as GPT cable.
For high-heat applications such as furnaces and ovens, this cable's insulation withstands temperatures of 390° F and higher.
The insulation resists corrosive chemicals and salt water, and the wires in this cable are tin plated for corrosion resistance.
A braided bronze armor provides excellent protection against abrasion and other damage. The wires are tin-plated for corrosion resistance, and the insulation resists corrosive chemicals and salt water.
A thick rubber insulation resists cuts and abrasion, so this cable can be pulled over rough surfaces without damaging the wires inside.
Often used in computers, small electronics, and electronic prototyping, this cable is very flexible with small gauge wire to handle tight curves in narrow spaces.
Often used in mining equipment, submersible pumps, and drilling rigs, this cable withstands 2,000 volts AC/DC.
Weather-resistant insulation makes this cable suitable for outdoor use and direct burial without conduit.
Often used to wire pendant switches, this cable hangs from an overhead connection. Also known as bus drop cable.
Also known as zip cord, this cable is often used in lamps, heat guns, and other small appliances.
Often used in automated applications such as robotics and cable carriers, this cable withstands continuous motion without degrading data or signal transmission.
The insulation has excellent resistance to oil, so this cable can be used near motors. Often used in automated applications, it withstands continuous motion without degrading data or signal transmission
Rated to 17,000 volts AC or higher, this cable is often used in oil drilling, robotics, and festoon systems. It withstands continuous motion without degrading data or signal transmission. The flat shape allows it to fit in tight spaces.
Use this cable without conduit in automated applications—it meets crush and impact requirements for exposed runs in cable carriers, and withstands continuous motion without degrading data or signal transmission.
In addition to handling continuous movement, this cable withstands twisting up to 450° without degrading data or signal transmission. It's often used in welding robots and rotary tables.
Connect servocontrollers and servomotors in automated equipment and on assembly lines. This cable withstands continuous motion without degrading data or signal transmission.
With a life span of more than 20 million high-speed flex cycles, this cable lasts twice as long as standard continuous-flex cable. The frequent motion will not degrade data or signal transmission.
For use in tight spaces, this cable has up to a 40% smaller OD than standard continuous-flex cable. It withstands continuous motion without degrading data or signal transmission.
Also known as fixture whips, this cable has locknuts and fittings attached to the protective metal armor to secure it to a knockout. It's often used to connect light fixtures.
This cable is approved for use in vertical shafts and large facilities with multiple levels. It's often used for low-current circuits such as intercoms and security systems.
Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it in low-current circuits such as intercoms and security systems.
After extending to full length to provide added reach, this cable retracts and self-coils for tangle-free storage. It's often used with low-current circuits such as microphones and headsets.
Connect low-current circuits such as intercoms and security systems to a building's electrical system in single-level facilities.
Send signal and data to operate, measure, or regulate automated equipment such as conveyors and CNC machines.
This cable meets TC-ER crush and impact requirements for exposed runs in cable trays, so it can be used without conduit. It sends signal and data to operate, measure, or regulate automated equipment.
This cable is used in variable-frequency drive motors. It has shielding to block signal interference caused by voltage fluctuations and current spikes.
Nearly two-thirds the diameter of standard control cable, this cable fits in tight spaces. It sends signal and data to operate, measure, or regulate automated equipment.
Often used in electronic prototyping or in the interior of computers, this flat cable is ultra flexible with small-gauge wires so it fits in tight spaces.
Keep water from damaging wires—this cable has a layer of absorbent material that traps moisture before it reaches the internal wires. It sends signal and data to operate, measure, or regulate automated equipment.
Also known as festoon cable, this flat cable fits in confined spaces such as overhead cranes and hoists. It sends signal and data to operate, measure, or regulate automated equipment.
Often used to send signal and data to order pickers and cranes, this cable withstands continuous motion applications without degrading data or signal transmission.
Use this cable for complex and high-speed data and signal transmission.
This cable has twisted pairs of wires that cancel signal interference from multiple transmission lines. Use it for complex and high-speed data and signal transmission.
Often used in radio transmission, network connections, and digital audio feed, this cable transmits audio, video, and data signals.
Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to transmit audio, video, and data signals.
Hook up speakers, intercoms, and other low-current devices to a building's communication wiring.
Connect devices such as sensors, programmable logic controllers, and actuators to an automated network.
Send data between computers, servers, and switches in an office or workstation.
Often used in automated applications that require continuous motion, this cable sends data between computers, servers, and switches without degrading signal transmission.
Connect telephones and telephone blocks to a wall jack.
This cable withstands abrasion, oil, and the rough conditions found in welding applications.
Approved for flame resistance, this cable meets Mine Safety and Health Administration (MSHA) standards. The insulation resists abrasion and chemicals.
Designed for indoor applications, these cords are often used to power appliances.
These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage.
Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.
After a power failure, these cords must be manually reset, preventing unexpected equipment startup.
All cords have a country-specific plug to power equipment from international outlets.
Hardwire these cords to equipment.
Save preparation time—these cords are ready-to-use with ring terminals on each end of a single-conductor wire.
Ground your electrical system.
Make your own thermocouples.
Extend the reach of your thermocouple probe—plug-in connectors on both ends of this wire speed up installation.
Make custom RTD probes.
These cables are for occasional use on cars and other small transport vehicles.
Thicker wires allow for a fast start on large trucks and industrial vehicles.