Permanently sew webbing onto these hooks.

These buckles have a bar that grips webbing tightly without sewing.

Attach webbing to these buckles without sewing.

Press the button to retract the webbing for easy storage.

Use this webbing in tie down and towing applications. It absorbs shock and will not scratch or damage the contact surface.

Add a slide to webbing to make adjustable straps.

Protect loads with this high-strength webbing that stretches to minimize shock to a load.

A nylon core makes this webbing stronger than standard cotton webbing.

Polypropylene is lightweight and economical.

This slip-resistant webbing remains flexible, even in low temperatures, and is easy to clean.

Sunlight and salt water are no match for this webbing that also resists chemicals and abrasion.

Each end of these straps has a hook and a movable ring—use them separately or together to create a soft loop in a choker configuration.

Position the ratchet buckle anywhere along the webbing to access the buckle more easily.

Pull rope through the automatic-locking buckle to tension; press the lever to release.

Use these seatbelt-style straps to secure loads with a click.

Set the amount of tension on these straps to prevent damage from overtightening. They have a ratchet buckle that tightens incrementally.

Use couplings to connect straps or convert end fittings from male to female.

These guides have a flat slot that accepts webbing and prevents it from twisting.

Slide these hooks into track to hang equipment or attach straps.

With the strength of plastic and the stretch of rubber, these polyurethane rubber tie downs have excellent stretch recovery and won't become brittle.

Also known as tarp straps, these tie downs stand up to wet weather and sunlight.

Heavy duty hooks and longer-lasting elastic cords make these tie downs stronger than standard abrasion-resistant tie downs.

Always have the straps you need. These assortments have straps from 8" to 35" long.

Suitable for marine environments, these tie downs resist corrosion from salt water and chlorine.

These tie downs won't become brittle or hard after exposure to sunlight.

Also known as footman's loops, use these guides to prevent webbing from twisting, or as anchor points in tie-down applications.

The ring pivots 90° or 180° to secure loads in various directions.

Accommodate ties in any direction with these rings that swivel all the way around.

The ring pivots 180° to secure loads in various directions. Also known as lashing rings.

Accommodate ties in any direction with these rings that swivel all the way around and pivot 180°.

Adhesive on the back holds these rings in place.

Attach these hooks to elastic cord to make a tie down.

The thick wire coil on these hooks makes them stronger than standard hooks.

These straps have holes on each end to accept a hook.

Strap is wider than cord to distribute pressure across the load.

Also known as bungee cord and shock cord, a fabric cover protects the inner elastic from abrasion.

This cord has excellent stretch recovery and won't become brittle.

Secure heavy cargo, then remove and store the handle to prevent unwanted adjustments.

These snaps have an eye that rotates for easy positioning.

Create fast connections with items, such as rope, chain, and straps.

A wide opening accepts large diameters of rope and pipe. Squeeze the trigger to release.

For a more secure connection than standard trigger-locking snaps, squeeze the trigger and slide the latch grip down to release.

Lock the bolt with wire or a cable tie for a secure connection.

Hang, pull, and secure loads. These rings are good for general non-lifting applications.

To open, lift and twist the latch 90°.

Add a strap or replace one that has worn out.

The hook on these straps quickly connects to the buckle—no need to spend time threading the end through the buckle.

Cut rolls to length and add the no-sew buckles. These straps stretch to hold bundles tight.

Easily transport or hang cords, rope, and hose—these hook and loop cable ties include a handle.

A versatile solution for temporary hanging of pipe and tubing at work sites as well as anywhere welding and fastening are not possible. Feed material through the strap, then use the D-rings to adjust the hanging height.