Zinc Plated Struts | McMaster-Carr

Filter by

Strut Channel Framing Component

Strut Channel Type

Material

Finish

System of Measurement

Channel Height

Channel Width

Construction

Bracket Type

Length

Thread Size

Thickness

DFARS Compliance

RoHS Compliance

Inside Channel Width

REACH Compliance

Hole Diameter

Number of Mounting Holes

Weight Capacity

Height

Width

Fasteners Included

Pipe Size

Forward

How can we improve?

567 Products

Strut Channel Framing and Fittings

Strut Channel

Low-Profile Strut Channel

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

Back-to-Back Stacked Strut Channel

This welded, one-piece strut channel combines two strut channels back-to-back.

Side-to-Side Stacked Strut Channel

This welded, one-piece strut channel combines two strut channels side-to-side.

High-Profile Strut Channel

Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.

Extra Low-Profile Strut Channel

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

Telescoping Strut Channel

Slide the strut channel into the tube for telescoping length adjustments.

Curved Strut Channel

Create continuous runs of channel without corners.

Corner Strut Channel Brackets

Surface Strut Channel Brackets

Offset-Surface Strut Channel Brackets

Wraparound Strut Channel Brackets

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

Push-In Strut Channel Brackets

Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.

Easy-Mount Strut Channel Threaded Rod Brackets

Attach strut channel at any point on a threaded rod without taking apart your assembly.

Strut Channel Floor Mounts

Securely fasten strut channel to the floor.

Strut Channel with Mounting Plate

Back-to-Back Stacked Strut
Channel with Mounting Plate

Strut Channel Beam Mounts

Mount a length of strut channel between the ends of a beam to run cable and conduit along the beam without drilling.

Strut Channel Standoffs

Mount strut channel away from walls.

Strut Channel Nuts

Serrated grooves grip the lip of the channel.

Strut Channel Nuts with Springs

A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.

Easy-Position Strut Channel Nuts

In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.

Clamping Strut Channel Nuts

Connect two channels to create a stacked channel.

Square Strut Channel Nuts

Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.

Strut Channel Nuts with Studs

There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.

Twist-Lock Strut Channel Nuts

Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.

Rod Stabilizing Strut Channel Nuts

Keep a rod securely centered against the strut channel.

Strut Channel Push Nuts

Push these nuts into place rather than threading them onto a fastener.

Hinged Strut Channel Nuts

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

Slotted-Hole-Mount Strut Channel Nuts

Quickly fasten threaded rod to strut channel. Snap these hinged nuts onto a threaded rod, then slip the head through a strut channel hole.

Strut Channel Nuts with Hollow Studs

Run wires through the hollow stud of these nuts or use them as vents.

Strut Channel Washers

Use with hex nuts to connect threaded rod.

Sit-on-Top Strut Channel Washers

Add hardware to strut channel without having to hold the washer in place or reach inside the channel.

No-Spin Strut Channel Washers

Notches on these washers grip the channel to keep them in place.

Centering Strut Channel Washers

Keep hardware centered in the strut channel slot.

Strut Channel Trolleys

Roll components along strut channel hanging overhead.

Strut Channel Trolley Brackets

Brackets mount on the outside of strut channel to allow trolley movement.

Strut Channel Curtain Slides

Smoothly move lightweight curtains overhead along strut channel.

Strut Channel Caps and Plugs

Cover rough ends of strut channel.

Strut Channel Braces

Support the corners of strut channel structures.

Strut Channel Shelf Brackets

A tab on the end of these shelf brackets fits inside the strut channel for extra stability.

Strut Channel Pivots

Position two strut channels at a 30° to 90° angle, then tighten the bolt to secure.

Strut Channel Covers

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

Strut Channel Hinges

Hold two pieces of strut channel together so they can smoothly open or close.

Strut Channel Handles

Mount between two strut channels to create a handhold.

Strut Channel Stair Tread Brackets

Mount these brackets to strut channel to add stair treads. They’re also known as stringers.

Strut Channel Rail Supports

Mount to your strut channel to support rail, tube, or pipe.

Strut Channel Conduit Connectors

Support and protect conduit by mounting it to strut channel.

Strut Channel Outlet Boxes and Covers

Mount electrical components along your strut channel to bring power to new locations.

Gas Spring Mounts

Heavy Duty Eyelet Mounting
Brackets for Gas Springs

These brackets secure eyelet end fittings from both sides to provide a strong hold on gas springs that get bumped or jostled. Mount on any panel, lid, or door.

Eyelet Mounting Brackets for Gas Springs

Attach eyelet end fittings to these brackets to mount gas springs.

90° Angle Eyelet Mounting Brackets for Gas Springs

Ball Studs for Gas Springs

Attach ball socket end fittings to these studs to mount gas springs.

Riveted Ball Studs for Gas Springs

Install these ball studs into thin material—they’re riveted, so you only need access to one side.

Routing and Suspending

Strut-Mount Metal Routing Clamps

Route pipe, tubing, and conduit across strut channel.

Standoff Strut-Mount Metal Routing Clamps

Hold pipe, tubing, and conduit away from strut channel.

Strut-Mount Metal Routing Clamps for Insulated Pipe

Secure insulated pipe to strut channel without pinching the insulation or exposing the pipe. These clamps are sized for use with insulated pipe and have a plastic insert that creates a seal around the insulation to prevent the pipe from sweating, which can cause mold and corrosion.

Narrow-Space Strut-Mount Metal Routing Clamps

Even when these clamps are installed side by side, the clamping screws remain accessible. Use them to route pipe, tubing, and conduit across strut channel.

Low-Profile Strut-Mount Metal Routing Clamps

For areas with low clearance, these clamps have the mounting fastener to the side of the material, rather than on top.

Strut-Mount Vibration-Damping Routing Clamps

Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.

Beam Clamps for Strut Channel

Support strut channel at a right angle to the beam.