Selecting Clamps Using Pipe, Conduit, or Tubing Trade Size
More
Strut Channel Floor Mounts
Securely fasten strut channel to the floor.
Rubber mounts are the least abrasive and they distribute loads better than metal mounts. They’re often used on roof surfaces.
For technical drawings and 3-D models, click on a part number.
For Strut Channel | Mounting Holes | Post Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Lg. | Wd. | Ht. | Thick. | Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Dia. | Each | |
Straight Post, For 1 Strut Channel | ||||||||||||
Black Rubber | ||||||||||||
| 1 5/8" | 1 5/8" | 12 3/8" | 12 3/8" | 4 5/8" | 11/16" | Yes | 4 | 7/16" | 10 7/8" | 1/2" | 000000000 | 0000000 |
Strut Channel Feet
Provide a stable, nonmarring base for strut channel legs.
For technical drawings and 3-D models, click on a part number.
| For Strut Channel Ht. | For Strut Channel Wd. | Dia. | Thick. | Material | Color | Insert Material | Capacity, lbs. | Each | |
| 1 5/8" | 1 5/8" | 3" | 1/2" | Rubber | Black | Steel | 200 | 000000 | 00000 |
Strut Channel End Stops
Block strut channel ends to keep trolleys, slides, and other hanging components from rolling out.
For technical drawings and 3-D models, click on a part number.
For Strut Channel | ||||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | No. of Holes | Hole Dia. | Color | Material | Fasteners Included | Each | |
| 1 5/8", 2 7/16", 3 1/4" | 1 5/8" | 1 | 9/16" | Black | Rubber | Yes | 0000000 | 000000 |
Strut Channel Covers
Create a four-sided raceway for cable, or give a more finished look to strut channel structures.
Rubber covers cushion pipe and duct work to reduce vibration. They’re also flexible.
For technical drawings and 3-D models, click on a part number.
10 ft. | |||
|---|---|---|---|
| Material | For Strut Channel Wd. | Each | |
Flexible | |||
| Black Rubber | 1 5/8" | 00000000 | 0000000 |
Strut-Mount Vibration-Damping Routing Clamps
Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.
TPE clamps hold lines of pipe, tubing, and conduit in light duty applications without the need for fasteners or installation tools. Made from a single piece of rubber, they prevent corrosion caused by metal-to-metal contact and resist most oils, chemicals, and cleaning compounds. To install, insert the clamp into strut channel and twist it 90° to secure. Then, press material into the clamp.
For technical drawings and 3-D models, click on a part number.
ID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | For Pipe Size  | Capacity | Lg. | Wd. | Ht. | Center Ht. | Thick. | For Strut Channel Wd. | Temp. Range, °F | Each | |
TPE Rubber | ||||||||||||
| 1/4" | 6 | __ | 75 lbs. | 1 5/16" | 1 3/8" | 1 5/16" | 3/16" | 5/64" | 1 5/8" | -50° to 275° | 000000000 | 00000 |
| 3/8" | 10 | __ | 75 lbs. | 1 5/16" | 1 3/8" | 1 1/2" | 5/16" | 5/64" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
| 1/2" | 13 | 1/8 | 75 lbs. | 1 1/2" | 1 3/8" | 1 13/16" | 7/16" | 3/32" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
| 5/8" | 16 | 1/4 | 75 lbs. | 1 1/2" | 1 3/8" | 2" | 1/2" | 7/64" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
| 3/4" | 18 | __ | 75 lbs. | 1 1/2" | 1 3/8" | 2 1/8" | 1/2" | 1/8" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
| 3/4" | 19 | 3/8 | 75 lbs. | 1 1/2" | 1 3/8" | 2 1/8" | 9/16" | 9/64" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
| 7/8" | 22 | 1/2 | 75 lbs. | 1 5/8" | 1 3/8" | 2 1/2" | 11/16" | 5/32" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
| 15/16" | 23 | __ | 75 lbs. | 1 5/8" | 1 3/8" | 2 1/2" | 11/16" | 5/32" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
| 1 1/8" | 29 | 3/4 | 75 lbs. | 1 15/16" | 1 3/8" | 2 7/8" | 13/16" | 3/16" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
| 1 3/16" | 30 | __ | 75 lbs. | 1 15/16" | 1 3/8" | 3" | 13/16" | 3/16" | 1 5/8" | -50° to 275° | 000000000 | 0000 |