Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

This welded, one-piece strut channel combines two strut channels side-to-side.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

Create continuous runs of channel without corners.

Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.

These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.

Mount a length of strut channel between the ends of a beam to run cable and conduit along the beam without drilling.

Serrated grooves grip the lip of the channel.

In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.

Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.

Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.

Push these nuts into place rather than threading them onto a fastener.

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

Add hardware to strut channel without having to hold the washer in place or reach inside the channel.

Keep hardware centered in the strut channel slot.

Brackets mount on the outside of strut channel to allow trolley movement.

Cover rough ends of strut channel.

A tab on the end of these shelf brackets fits inside the strut channel for extra stability.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

For quick mounting of components, these hangers snap into strut channels for a strong hold and easy repositioning.

Mount between two strut channels to create a handhold.

Mount to your strut channel to support rail, tube, or pipe.

Mount electrical components along your strut channel to bring power to new locations.

Attach eyelet end fittings to these brackets to mount gas springs.

Attach ball socket end fittings to these studs to mount gas springs.