Filter by
For Use On
Consistency
Maximum Temperature
Manufacturer
Type
Manufacturer Model Number
Formulation
Manufacturer Model Name
Clarity
For Use Outdoors
Environment
Minimum Temperature
For Use With
REACH
DFARS Specialty Metals
Surface Fillers for Metal
 |  |
Epoxy Jar | Epoxy Cartridge |
 |  |
Jar, Can | Can |
Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.
Fixmaster Aluminum Liquid and Fixmaster Aluminum Putty—Loctite® Fixmaster Aluminum Liquid and Loctite® Fixmaster Aluminum Putty form a nonrusting finish.
Fixmaster Steel Epoxy—Use Loctite® Fixmaster Steel Epoxy with a dispensing gun and mixer nozzle to mix as you dispense.
Model Number EA 3471 and Model Number PC 235642—Loctite EA 3471 and PC 235642 have stronger adhesion than any other surface fillers we offer.
Container | Temp. Range, ° F | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Net Wt., lb. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Mix Ratio | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Fixmaster Aluminum Liquid | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PC 3466 | — | 1 | Jar, Can | 20 | 24 | Thick Liquid | Yes | 5:1 | 60 in² @ 1/4" | 1" | Yes | -20 | 200 | Gray | Machine, Drill, Tap | Aluminum | 0000000 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Fixmaster Aluminum Putty | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PC 7254 | — | 1 | Jar | 20 | 24 | Paste | Yes | 4:1 | 70 in² @ 1/4" | 1" | Yes | -20 | 200 | Gray | Machine, Drill, Tap | Aluminum | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Fixmaster Steel Putty | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| EA 3471 | — | 1 | Jar | 30 | 24 | Thick Liquid | Yes | 2.5:1 | 40 in² @ 1/4" | 1" | Yes | -20 | 220 | Gray | Machine, Drill, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| EA 3473 | — | 1 | Jar | 3 | 24 | Paste | Yes | 1:1 | 50 in² @ 1/4" | 1" | Yes | -20 | 190 | Gray | Machine, Drill, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PC 235642 | — | 4 | Can | 30 | 24 | Paste | Yes | 2.5:1 | 170 in² @ 1/4" | 1" | Yes | -20 | 220 | Gray | Machine, Drill, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Fixmaster Steel Epoxy | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PC 3965 | 1.7 | — | Cartridge | 3 | 7 | Paste | Yes | 1:1 | 57 in² @ 1/4" | 1" | Yes | -20 | 200 | Gray | Machine, Drill, Sand, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Fixmaster Stainless Steel Putty | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| EA 3476 | — | 1 | Jar | 20 | 24 | Paste | Yes | 4:1 | 30 in² @ 1/4" | 1" | Yes | -20 | 220 | Gray | Machine, Drill, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Surface Fillers
 |  |
Epoxy Mixer Cup | Epoxy Syringe |
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Container | Temp. Range, ° F | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Net Wt., oz. | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mixing Req. | Mix Ratio | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Pkg. Qty. | Pkg. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Fixmaster Epoxy | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| EA 445 | — | 0.12 | Mixer Cup | 5 | 12 hr. | Thick Liquid | Yes | 1:1 | 1 in² @ 1/4" | 1/4" | Yes | -65 | 180 | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| EA 445 | — | 1 | Mixer Cup | 5 | 12 hr. | Thick Liquid | Yes | 1:1 | 1 in² @ 1/4" | 1/4" | Yes | -65 | 180 | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| EA 9131 | — | 0.12 | Mixer Cup | 90 | 24 hr. | Thick Liquid | Yes | 1.5:1 | 1 in² @ 1/4" | 1/4" | Yes | -65 | 180 | White | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Fixmaster Poxy Pak™ | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| EA 9017 | 0.8 | — | Syringe | 5 | 60 min. | Thick Liquid | Yes | 1:1 | Not Rated | 1/4" | Yes | -65 | 300 | Clear | Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Concrete, Glass, Wood | 1 | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Impact-Resistant Surface Fillers for Metal
 |  |
These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders. The size listed is the combined total of the two parts.
%20--%3e%3cg%3e%3cg%20id='Layer_1'%3e%3cpath%20class='cls-1'%20d='M68,27.2c-14.6,0-26.4,11.7-26.4,26.3,0,7,2.8,13.7,7.7,18.7v44.8l18.8-16.1,18.7,16.1v-44.9c10.3-10.3,10.3-27,0-37.3-5-4.9-11.7-7.7-18.7-7.7h0ZM81.3,105l-13.2-11.4-13.2,11.4v-28.7c8.2,4.8,18.3,4.8,26.5,0v28.7ZM76.2,70.8c-5.2,2.5-11.2,2.5-16.4,0-9.5-4.5-13.5-15.9-9-25.4,4.5-9.5,15.9-13.5,25.4-9,9.5,4.5,13.5,15.9,9,25.4-1.9,4-5.1,7.1-9,9Z'/%3e%3cpath%20class='cls-2'%20d='M5.8,95.5c-1.2,0-2.1-1-2.1-2.1,0,0,0,0,0,0V29.4h20.9c2.1,0,3.8-1.7,3.8-3.8V3.7c.2,0,.4,0,.5,0h37.5c1.2,0,2.1,1,2.1,2.1v18.6c1.2,0,2.5.1,3.7.3V5.8C72.2,2.6,69.6,0,66.4,0H28.9c-1.5,0-3,.6-4.1,1.7h-.1c0,.1-23,23.2-23,23.2-1.1,1.1-1.7,2.6-1.7,4.1v64.3c0,3.2,2.6,5.8,5.8,5.8h41.7v-3.7H5.8ZM24.7,7.1v18.7H6L24.7,7.1Z'/%3e%3c/g%3e%3c/g%3e%3c/svg%3e)
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | Temp. Range, ° F | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Wt., lb. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Mix Ratio | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Nordbak High Impact Wearing Compound | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PC 9313 | 25 | Pail, Can | 30 | 6 | Paste | Yes | 2:1 | 1,240 in² @ 1/4" | 1/4" | Yes | -20 | 250 | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Water-Resistant Surface Fillers
 |
Epoxy Stick |
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.
Putty—Putty fillers come in a stick with a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.
NSF/ANSI 61—NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.
Container | Temp. Range, ° F | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Wt., oz. | Type | Lg. | Begins to Harden, min. | Reaches Full Strength | Consistency | Mixing Req. | Approx. Coverage @ Thk. | Max. Thk. | Dia. | For Use Outdoors | Min. | Max. | Color | Food Industry Std. | Process After Hardening | For Use On | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Fixmaster Metal Magic Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| EA 3463 | 4 | Stick | 8" | 3 | 24 hr. | Putty | Yes | 10 in² @ 1/4" | 1" | 1" | Yes | -20 | 250 | Gray | NSF/ANSI 61 | Sand | Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Fixmaster Underwater Repair Epoxy | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| EA 9490 | 4 | Stick | 8" | 15 | 60 min. | Putty | Yes | 16 in² @ 1/4" | 1/4" | 1" | Yes | Not Rated | 300 | White | — | Machine, Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Concrete, Fiberglass, Wood | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Temperature Surface Fillers for Metal
 |
Epoxy Can |
Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F. Fillers that have a mix ratio are multi-part fillers. The size listed is the combined total of the parts.
Container | Temp. Range | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Min. | Max., ° F | Color | Process After Hardening | For Use On | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Fixmaster 2000° Putty | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| MR 2000 | 8 | Can | 30 | 7 | Putty | No | 30 in² @ 1/4" | 3/32" | Yes | Not Rated | 2,000 | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Fine-Particle Abrasion-Resistant Surface Fillers for Metal
| | | |
Epoxy Jar | Epoxy Can | Epoxy Pail, Can | Epoxy Pail, Can |
For use in processing equipment that carries particles smaller than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings. The size listed is the combined total of the two parts.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | Temp. Range, ° F | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Wt., lb. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Mix Ratio | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Fixmaster Wear Resistant Putty | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PC 7222 | 1 | Jar | 30 | 24 | Putty | Yes | 2:1 | 50 in² @ 1/4" | 1" | Yes | -20 | 220 | Gray | Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Nordbak Pneu-Wear | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PC 7317 | 3 | Can | 30 | 6 | Paste | Yes | 4:1 | 150 in² @ 1/4" | 1/4" | Yes | -20 | 250 | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PC 7317 | 25 | Pail, Can | 30 | 6 | Paste | Yes | 4:1 | 1,240 in² @ 1/4" | 1/4" | Yes | -20 | 250 | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PC 7455 | 6 | Can | 10 | 3 | Paste | Yes | 2:1 | 310 in² @ 1/4" | 1/4" | Yes | -20 | 220 | Blue | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Pourable Surface Fillers
|
Make castings and fill voids with these two-part pourable epoxies. The size listed is the combined total of the two parts.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | Temp. Range, ° F | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Wt., lb. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Mix Ratio | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Fixmaster Steel Liquid | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| EA 3472 | 1 | Can | 25 | 24 | Thick Liquid | Yes | 4:1 | 50 in² @ 1/4" | 1" | Yes | -20 | 220 | Gray | Machine, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete | 0000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| EA 3472 | 4 | Can | 25 | 24 | Thick Liquid | Yes | 4:1 | 200 in² @ 1/4" | 1" | Yes | -20 | 220 | Gray | Machine, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Chemical-Resistant Surface Fillers for Metal
|
Epoxy Jar |
Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Container | Temp. Range, ° F | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Wt., lb. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Mix Ratio | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Fixmaster Superior Metal | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| EA 3478 | 1 | Jar | 20 | 24 | Paste | Yes | 4:1 | 30 in² @ 1/4" | 1" | Yes | -20 | 250 | Gray | Machine, Drill | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Large-Particle Abrasion-Resistant Surface Fillers for Metal
| |
Epoxy Jar, Can | Epoxy Pail, Can |
For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers. The size listed is the combined total of the two parts.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | Temp. Range, ° F | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Wt., lb. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Mix Ratio | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Nordbak Wearing Compound | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PC 7218 | 5 | Jar, Can | 30 | 7 | Paste | Yes | 2:1 | 260 in² @ 1/4" | 1/4" | Yes | -15 | 250 | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PC 7218 | 25 | Pail, Can | 30 | 7 | Paste | Yes | 2:1 | 1,240 in² @ 1/4" | 1/4" | Yes | -15 | 250 | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PC 7357 | 6 | Jar, Can | 25 | 8 | Paste | Yes | 2:1 | 310 in² @ 1/4" | 1/4" | Yes | -20 | 250 | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PC 9599 | 6 | Jar, Can | 10 | 3 | Paste | Yes | 2:1 | 310 in² @ 1/4" | 1/4" | Yes | -20 | 220 | Blue | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Conductive Surface Fillers for Electronics
 |
Single-Use Packet |
A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components. They come as two parts. The size listed is the combined total of the two parts.
Thermal Conductivity—Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.
Electrical Volume Resistivity—Electrical volume resistivity measures how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.
Container | Temp. Range, ° F | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Wt., oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Thermal Conductivity, W/(m⋅°C) | Electrical Volume Resistivity | Mix Ratio | Max. Thk. | For Use Outdoors | Min. | Max. | Color | For Use On | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Surface Fillers | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3888 | 0.09 | Single-Use Packet | 90 | 24 | Paste | Yes | 1.44 | 0.001Ω⋅cm | 100:6 | 1/4" | Yes | -40 | 170 | Silver | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Polycarbonate | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Surface Fillers for Rubber
 |
Repair worn and torn rubber parts. These two-part fillers are self leveling to form a tough, flexible new surface. They're often used with conveyor belts, mill liners, and pumps. The size listed is the combined total of the two parts.
For best results, sand or grind the damaged area to improve adhesion. Brush away loose material. Prepare the surface with cleaner and etching agent (sold separately). Use a dispensing gun and mixer nozzle (not included) to apply the fillers, and smooth with the included plastic spatula.
Container | Temp. Range, ° F | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Mix Ratio | Max. Thk. | For Use Outdoors | Min. | Max. | Color | For Use On | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Surface Fillers | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PC 7350 | 13.5 | Cartridge | 7 | 2 | Thick Liquid | Yes | 1:1 | 1/4" | Yes | -20 | 180 | Black | EPDM, Polyurethane Rubber | 000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
