Scribers with Base
Also known as surface gauges, use these to scribe lines, transfer measurements, or as height and depth gauges. They have a V-groove base that can be used on round or flat surfaces.
Gauge pins can be pushed down for use against the edge of a surface plate or T-slot for linear work.
Mounting Rod | Base | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Tip Style | Scriber Lg. | Lg. | Dia. | Lg. | Wd. | Material | Adjustment Method | Manufacturer | Manufacturer Model Number | Each | |
With 2 Gauge Pins | |||||||||||
| 90° Angle | 8 1/2" | 18" | 3/8" | 3 3/4" | 3 3/8" | Cast Iron | Screw | Starrett | 57D | 000000 | 0000000 |
| Curved | 6" | 12" | 5/16" | 3" | 2 1/2" | Cast Iron | Screw | Starrett | 57B | 000000 | 000000 |
With 4 Gauge Pins | |||||||||||
| 90° Angle | 8 1/2" | 18" | 3/8" | 3 1/2" | 3 1/4" | Steel | Screw | Starrett | 257D | 000000 | 000000 |
| Curved | 6" | 12" | 5/16" | 2 7/8" | 2 3/8" | Steel | Screw | Starrett | 257B | 000000 | 000000 |
Surface-Finish Scales
Compare your surface finish to one of the swatches on these scales. The finishes are expressed in microinches (µ").
30-swatch scale comes with a chart to correlate the finishes with CLA and ISO N scales.
Economy Surface-Finish Scales
Compare your surface finish to one of the swatches on this scale. The finishes are expressed in microinches (µ").
| No. of Swatches | Scale | For Surface Type | Surface Finish Range, microinch | Lg. | Wd. | Material | Each | |
| 18 | AA, Ra | Flame Cut, Ground, Milled, Turned | 16-500 | 5" | 3 1/2" | Plastic | 000000 | 000000 |
Surface-Finish Scales with Certificate of Calibration
This scale comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. Compare your surface finish to one of the swatches on the scale. The finishes are expressed in microinches (µ").
| No. of Swatches | Scale | For Surface Type | Surface Finish Range, microinch | Lg. | Wd. | Material | Each | |
| 22 | Ra | Ground, Lapped, Milled, Profiled, Turned | 2-500 | 2" | 5 3/8" | Nickel Alloy | 0000000 | 0000000 |
Surface-Roughness Testers
These units test for the most popular parameters, such as Ra, Rp, and Rq. You can also set an upper and lower limit for go/no-go readings, or test for a specific standard, such as ANSI, ISO, JIS, or VDA. Tester can save up to 10 readings and can take 1,000 readings on a single charge. It has an RS-232C port for a direct connection to your PC.
Use the SPC data output cable (sold separately) to connect your tester to a Mitutoyo miniprocessor.
Computer Connection | Mitutoyo Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | Probe Tip Dia. | Type | Gender | Industry Designation | Type | Gender | Batteries Included | Includes | Each | |
| 6 1/4" | 2 1/2" | 2" | 0.0004" | Micro USB, Type B | Female | RS-232C | 10-pin | Female | Yes | Battery-Charging AC Adapter, Roughness Sample for Calibrating | 0000000 | 000000000 |
UV Light Flaw-Detection Kits
More sensitive than natural light kits, these kits use UV light with colored dye to detect cracks, seams, and pores on machined surfaces.
Light | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Use On | Includes | Bulb Type | Wattage | Voltage | Electrical Connection Type | Plug Type | Cord Length, ft. | Specifications Met | Each | |
| Carbide, Cast Iron, Ceramic, Stainless Steel, Steel | One 16-oz Aerosol Can of Fluorescent Green Dye, One 16-oz. Can of Developer, Two 16-oz. Aerosol Cans of Cleaner, UV Light | Ultraviolet | 5W | 120V AC | Plug In | Three Prong | 9 | ASTM E1417, MIL-STD-2132, MIL-STD-271, SAE AMS2644 | 0000000 | 000000000 |
Wet-Coating-Thickness Gauges
Measure the thickness of wet coatings such as paint. These gauges display readings in mils on one side and microns on the other side. For readings in mils, one mil equals 0.001".
For Coating Thick. | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Coating Type | Mil | Microns | Wd. | Lg. | Material | Specifications Met | Each | |
For Use On Aluminum, Copper, Plastic, Stainless Steel, Steel | ||||||||
| Nonconductive, Nonmagnetic | 1-118 | 25-3,000 | 2 5/8" | 3" | Aluminum | ASTM D4414, ISO 2808 | 000000 | 000000 |
Economy Coating-Thickness Gauges for Hard-to-Reach Areas
This pen-shaped gauge is good for use on hard-to-reach surfaces. Use it to measure nonmagnetic coatings such as paint, galvanizing, plating, and enamel on steel. This gauge displays readings in mils; one mil equals 0.001".
| For Coating Type | For Coating Thick., mil | Accuracy | Lg. | Dia. | Each | |
For Use On Steel | ||||||
|---|---|---|---|---|---|---|
| Nonmagnetic | 1-15 | ±0.2 mils | 5 1/4" | 1/2" | 00000000 | 000000 |
Coating-Thickness Gauges for Hard-to-Reach Areas
This pen-shaped gauge is good for use on hard-to-reach surfaces. Use it to measure nonmagnetic coatings such as paint, galvanizing, plating, and enamel on steel. This gauge displays readings in mils and microns. For readings in mils, one mil equals 0.001". It comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy.
For Coating Thick. | |||||||
|---|---|---|---|---|---|---|---|
| For Coating Type | Mil | Microns | Accuracy | Lg. | Dia. | Each | |
For Use On Steel | |||||||
| Nonmagnetic | 1/4-20 | 5-500 | ±10% | 5 1/2" | 1/4" | 0000000 | 0000000 |
Coating-Thickness Gauges
Use these gauges to measure nonmagnetic coatings such as paint, galvanizing, plating, and enamel on steel. All come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.
Hold the probe on your material for a quick reading. These gauges display readings in mils; one mil equals 0.001". They have a wear-resistant carbide probe and a go/no-go button for rapid measurement. A V-groove in the base provides stability on curved surfaces.
Digital Coating-Thickness Gauges with Certificate of Calibration
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. Use them to measure coatings such as paint, galvanizing, plating, and enamel. They display readings in mils and microns; for readings in mils, one mil equals 0.001". All have a wear-resistant ruby probe.
For Coating Thick. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Coating Type | Mil | Microns | Accuracy | Wd. | Ht. | Dp. | Reading Storage Cap. | Batteries Included | Includes | Features | Specifications Met | Each | |
For Use On Aluminum, Copper, Stainless Steel, Steel | |||||||||||||
| Nonmagnetic, Nonconductive | 0-60 | 0-1,500 | ±1% | 2 3/8" | 5 3/8" | 1 1/8" | 1,000 | Yes | __ | Built-In Probe, High/Low Limits | ASTM B499, ASTM D1186, ASTM D1400, ISO 2808 | 0000000 | 000000000 |
| Nonmagnetic, Nonconductive | 0-60 | 0-1,500 | ±1% | 2 3/8" | 5 3/8" | 1 1/8" | 1,000 | Yes | Detachable Probe with 3 ft. Cable | High/Low Limits | ASTM B499, ASTM D1186, ASTM D1400, ISO 2808 | 0000000 | 00000000 |
For Use On Steel | |||||||||||||
| Nonmagnetic | 0-60 | 0-1,500 | ±1% | 2 3/8" | 5 3/8" | 1 1/8" | 1,000 | Yes | __ | Built-In Probe, High/Low Limits | ASTM B499, ASTM D1186, ASTM D1400, ISO 2808 | 0000000 | 000000 |
Digital Coating-Thickness Gauges
Measure coatings such as paint, galvanizing, plating, and enamel. These gauges display readings in mils and microns; for readings in mils, one mil equals 0.001". They have a wear-resistant ruby probe.
Ultrasonic Painted-Surface Thickness Gauges
Measure the thickness of painted metal without removing the coating. The ultrasonic probe provides highly accurate readings. This gauge comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. It also includes a USB cord for connecting to your PC. Use the included ultrasonic gel for maximum surface contact.
Use calibration blocks to calibrate your thickness gauge. All blocks have a serial number and come with a calibration certificate traceable to NIST.
