Use these wheels for precision grinding on surface, cylindrical, and tool and cutter grinders. They are also known as Type 1 wheels and straight wheels.

The special shapes of these wheels provide more clearance than typical straight wheels.

The porous bond leaves more space between abrasive grains so heavy amounts of chips and coolant easily flow through.

Use these wheels for light grinding, deburring, and sharpening.

The perforated honeycomb pattern cuts carbide, ceramics, and glass without the need for cleaning.

Wheels are a blend of aluminum oxide and zirconia alumina, which removes more material and lasts three times as long as our General Purpose Grinding Wheels. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Bonded without any wax or rubber filler, these wheels resist material buildup. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

A blend of ceramic alumina and zirconia alumina removes material at a 50% faster rate than our Long-Life Grinding Wheels. Wheels are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Multiple layers of nylon mesh embedded with abrasive provide a cushioned grind. Also known as unitized discs or wheels.

Heat-dissipating holes reduce material buildup and extend the life of the wheel. Wheels have a semiflexible backing that conforms to curved and rough surfaces.

A blend of cotton laminate and aluminum oxide creates a smoother surface than other grinding wheels with similar grits. Wheels are also known as Type 27 wheels and raised-hub wheels.

Silicon carbide cuts through concrete and stone without generating much heat. Wheels are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Use these wheels for heavy material removal in one spot or along a weld seam. They are also known as Type 1 wheels and snagging wheels.

A combination of cotton laminate and aluminum oxide abrasive creates a smoother surface than other grinding wheels with similar grits.

The abrasive grains in these discs are blended with rubber, which cushions during grinding to produce a smoother surface texture than other discs with similar grits. Discs attach to your grinder with a shank.

The bits in this set have rubber blended into the abrasive, which cushions during grinding to produce a smooth to extra-smooth surface texture.

Made of aluminum oxide, these bits are well suited for use on most metals and materials that are not heat sensitive.

Use bits in any drill chuck that accepts a 1/4" hex shank.

Each set contains a selection of our most popular grinding bits.

Set contains an assortment of tools for grinding, sanding, and cutting on small surface areas.

The diamond abrasive in these bits is extremely hard and lasts longer than tungsten carbide. For longer tool life and improved finish, use a water- or oil-soluble mist or coolant.