A rubber seal protects these switches from splashing water.

Maximize the space in a panel—these switches are half the size of most toggle switches.

Prevent accidental actuation—these toggle switches must be pulled up before they can switch a circuit.

A quick push is all it takes to actuate these switches.

Mount these switches in panel cutouts where changing a battery or routing wires might be difficult—they power themselves when you push the button.

Actuate these switches with the push of a button. Their buttons are distinct colors to help you quickly spot switches without labels.

Actuate these switches with a quick push. A housing seals in anything that could ignite flammable material, so you can use them where ignitable gas and dust may be present.

Immediately cut power with a single push.

Immediately cut power with a single push.

Install in 10 mm dia. cutouts.

A protective plastic enclosure resists dents, chips, and cracks, so you can install these switches outside of panels.

Use these switches where ignitable gas and dust may be present. They're rated for use in hazardous locations.

These aluminum switches are rated NEMA 4, NEMA 13, and IP66 for protection from washdowns and oil/coolant spraying.

Immediately cut power with a single push.

Grip and twist a lever to turn these switches on or off—they’re designed to prevent accidental actuation. Install them into standard-sized panel cutouts.

Rated NEMA 4, 13, and IP66, these metal switches are protected from washdowns and oil/coolant spraying. Install them in 30 mm dia. cutouts.

Avoid accidental actuation—these switches won’t turn on or off until you grip and twist the lever. Install in a 16 mm dia. cutout.

Rated IP67 for protection from dust and temporary submersion.

Maximize space in a panel—these switches are smaller than most standard rocker switches.

Choose an actuator and contact block to make your own 30 mm switch.

Choose an actuator and contact block to make your own 16 mm switch.

A durable rubber housing covers the buttons and protects these switches from impact.

Operate these switches hands-free when working in damp or humid environments.

Use this switch for intermittent, light-duty applications.

Install these key switches in 3/4" dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.

To prevent accidental actuation and limit access to sensitive equipment, these switches require a key to turn circuits on or off. The contact block and actuator are all one piece, so they won’t separate in high-vibration applications.

Maximize space in a panel with these miniature switches.

Reset fire panels, or open electromagnetic locks, electric strikes, and automatic door openers. These switches require a key to turn circuits on or off, limiting access and preventing accidental activation.

Immediately cut power by pulling the cable.

Connect these switches to a cable to control circuits from a distance. They're typically used to turn off production lines and material handling systems.

An infrared light beam senses the lightest finger contact to switch a circuit on or off.

Rated NEMA 4 , these enclosed switches have a sealed actuator for protection from washdowns.

Actuate these switches with a fraction of the force of other subminiature switches for increased responsiveness. Among the smallest snap-acting switches we offer, they fit into the tiniest of spaces.

Trigger actions in devices as small as phones and drones. The smallest snap-acting switches we offer, these switches fit into the tiniest of spaces and help keep weight to a minimum.

Stack these slim switches together, or fit them into tight spaces. They're rated IP67 for protection from temporary submersion.

Secure these switches into panel cutouts using mounting nuts. They have a slim body so they can also be stacked together or fit into tight spaces.

Protect machinery and ensure the safety of personnel—these switches will open the circuit when actuated even if a spring fails or the contacts stick.

Rated NEMA 3S and IP69K, these switches can handle washdowns with high pressures and temperatures. They’re also protected from oil/coolant spraying, precipitation, and temporary submersion.

Often used in large, open workspaces, these switches can be wired on opposite ends of the room to control lights on the same circuit. They're also known as three-way and four-way switches.

Also known as three-way switches, these are often used in large, open workspaces and can be wired on opposite ends of the room to control lights on the same circuit.

Prevent accidental activation—these switches require a key to turn lights on and off.

Secure sensitive lighting equipment; these switches have a round key that is difficult to duplicate.

Automatically turn outdoor lights on and off based on lighting conditions to conserve energy.

Use these switches to sense metallic objects in environments containing flammable gases and combustible dust. ATEX and IECEx certified to protect against explosion, they produce a low-current, low-voltage NAMUR signal, so they won’t ignite or create sparks.

Mount these intrinsically safe switches to flat surfaces in volatile areas. Their low-current, low-voltage NAMUR signal means they won’t ignite or create sparks while in use. ATEX and IECEx certified, they meet international standards to protect against explosion where combustible dust and flammable gases are present.

For use in volatile areas, these intrinsically safe switches detect objects when they pass through the slot. They use a NAMUR signal to operate at a low current and voltage, so they won’t ignite or create sparks. ATEX and IECEx certified, they protect against explosion.

These intrinsically safe switches detect objects as they’re routed through the ring. They produce a low-current, low-voltage NAMUR signal, so they won’t ignite or create sparks. Switches are ATEX certified to protect against explosion.

Most often found in older devices, these switches require AC input voltage.

Mount these flat inductive switches to a base or rail to remotely detect metallic objects in wet and dirty environments.

With a narrow, flat body, these switches fit in tight spaces.

The highly flexible fiber-optic cable and small sensing end help you position these switches in hard to reach areas.

These switches use a NAMUR signal to operate at a low current and voltage, so they won’t ignite or produce sparks. ATEX certified, they protect against explosion in environments containing flammable gases and combustible dust. Switches sense both metallic and nonmetallic objects.

Support flow and temperature control in your system with these intrinsically safe switches, which sense when a valve is open or closed in volatile areas. They are ATEX and IECEx certified to protect against explosion.

Push and release the button to activate—no electricity required.

Rated NEMA 3R, these rain-tight switches protect against falling liquids and light splashing.

Program these switches to turn a device on and off at a set time and day.

Switches fit single device (1 gang) outlet boxes.

Install these switches in a panel cutout.

Rated NEMA 3R, these rain-tight switches protect against falling liquids and light splashing.

These switches are housed in a plastic enclosure.

Designed to mount on an electrical enclosure, these switches control motors, lighting, and electric heat circuits.

Use these switches with motors that run forward and backward, such as motors for conveyor belts.

The NEMA 4X rated enclosure protects these starters from corrosion and washdowns.

Housed in a durable steel enclosure.

Plug monitors into relay sockets for fast installation and replacement.

Protected by a steel enclosure, these switches withstand tougher conditions than switches in a plastic housing. Also known as safety switches, they have quick-make/quick-break action to eliminate arcing and prolong switch life.

With a housing that’s designed to contain an explosion, these switches are safe to use in areas where ignitable concentrations of flammable or combustible gas, dust, or fibers may be present.

Prevent motors and other equipment from overheating or failing from not having enough voltage. When the supply voltage falls below 35% of the rated voltage, these switches will automatically turn off to protect the circuit from undervoltage.

With no moving parts, these solid-state relays are fast switching and require less maintenance, last longer, and are quieter than mechanical switches.

Using a low-current signal, these relays are often used to control small motors and heaters.

Fit these relays where standard spade-terminal relays are too big.

The circular pin terminals plug into relay sockets for easy installation.

For use with equipment that cycles on and off, these relays meet UL 508 for air conditioning and heating. Also known as definite-purpose contactors.

A single, momentary input voltage switches these relays and locks them in position, so they don't require a constant input voltage to stay on or off.

Reduce connection errors on circuit boards that control machine guards and other safety devices. These relays take up less space on a board than those with electrical wiring because their solder pin terminals mount directly through circuit board holes.

Split run time between two devices—these relays automatically alternate between them.

Remotely control these relays through an app on your smartphone—they simultaneously monitor phase, voltage, and frequency.

Protect electrical equipment from overcurrent and undercurrent damage—these relays continuously monitor current flow.

No need to program multiple PLCs—these modules expand your automated system, keeping everything conjoined and configured on one processor. Use them when you’re out of space on your DIN rail or need additional input/output functions.

Mount these timer relays directly to 35 mm DIN rail (also known as DIN 3 rail) for fast installation. Unlike mechanical relays, they have no moving parts, so they require less maintenance and last longer, are quieter, and switch faster.

Install these relays in a panel cutout or plug them into a relay socket. Unlike mechanical relays, these solid state relays have no moving parts, so they require less maintenance and last longer, are quieter, and switch faster.

Whether installed in an electrical cabinet or hard-to-reach area, these timer relays are controlled remotely from your smartphone. They connect to your phone via a free downloadable app so you can set time delay ranges, adjust settings, and save programs.

These valves are rated for environments where hazardous material is present. They actuate when voltage is applied to the electrical connection.