Prevent accidental actuation—these toggle switches must be pulled up before they can switch a circuit.

Create a seal around the base of a toggle while leaving the actuator exposed.

Install in 12 mm dia. cutouts.

These switches withstand temporary submersion.

Control equipment from up to 40 feet away—these switches include a transmitter and a receiver that connects to equipment.

Sealed actuators prevent these switches from jamming, even when exposed to oil, sand, mud, or ice.

Twist the sensor to detect metallic objects where explosive dust or gas may be present—the sensor rotates for front, side, top, or bottom sensing. These switches are UL and C-UL listed as well as ATEX and IECEx certified for hazardous locations.

Use these switches to sense metallic objects in environments containing flammable gases and combustible dust. ATEX and IECEx certified to protect against explosion, they produce a low-current, low-voltage NAMUR signal, so they won’t ignite or create sparks.

Turn the face on these switches to sense metallic objects from the front, sides, top, or bottom.

Switches accept both AC and DC input voltage.

Maintain sanitary standards—these switches have smooth surfaces without crevices, so they prevent bacteria from building up and are easy to clean.

Rated NEMA 4X, 6P, IP68 and IP69K, these switches resist corrosion and high-pressure, high-temperature washdowns, and can withstand temporary submersion.