The enclosure not only protects these switches, but also adds options for how you install them. Secure them to a wall or use the knockout to attach a cord grip and cord, so you can move them around your workstation. Made of polycarbonate plastic, the enclosure resists denting, chipping, and cracking. It’s also NEMA rated to withstand corrosion, washdowns, and spraying oil or coolant. Since you have to twist the lever to actuate these switches, they won’t accidentally flip if someone bumps into them. Choose switches based on their actuator color for an easy way to tell them apart.

Also known as interlock switches, these ensure the safety of personnel by automatically shutting off power to machinery when an access door opens. Mount the switch to the door frame and mount a key to the door so that the key is inserted into the switch when the door is closed. When the door opens, the key is removed from the switch and the machine shuts down. They’re often used with machine guards for large robots.

Made of yellow polycarbonate plastic, these enclosed switches are easy to see and resist dents, chips, and cracks. They are more corrosion resistant than aluminum enclosed switches and withstand washdowns and oil/coolant spraying. Mount them to a wall or attach a cord grip to position them at your workstation. They have positive force contacts that will open a circuit when actuated, even if a spring fails or the contacts stick. A single push will immediately cut power.

The switches can be reset by manually pulling, turning or unlocking them by key.

Mount these switches in panel cutouts where changing a battery or routing wires might be difficult—they power themselves when you push the button. These switches wirelessly send a signal to a receiver (sold separately) up to 330 feet away. Since they operate equipment without requiring wires back to your control panel, they’re often used for retrofit or temporary installations. The switches come in distinct colors to help operators quickly identify them.

Switches include enough contact blocks to control the number of circuits listed.

Halt machinery in an instant with these tablet holders. They equip your tablet with safety switches that meet IEC and EN standards, so you can safely move around your equipment while teaching robots or monitoring production lines and conveyor systems.

The emergency stop switch on the front of the holder illuminates when the switch is enabled. There is also a deadman switch on the back of the holder that controls machinery when you lightly press and hold it in the middle position. If the switch is released or pressed down all the way, it stops the machine.

Pivot the handle to hold a tablet vertically or horizontally, while keeping the switches in a comfortable position for either hand. The adjustable mounting bracket secures a variety of tablet sizes. Connect your tablet to the USB port to charge during use.

Tablet Holder Bracket Kits—Tablet holder bracket kits enlarge the bracket to hold tablets with thick covers and protectors.