A rubber seal protects these switches from splashing water.

Maximize the space in a panel—these switches are half the size of most toggle switches.

Able to withstand high currents, these switches are often used with motors and pumps.

Sized for 4 mm or 6 mm panel cutouts, these switches are often used with circuit boards to control electronics.

Choose from a variety of messages and colored lenses to combine a rocker with a base and wiring socket for a complete switch.

Also known as high-inrush current switches, these switches can handle starting currents up to 10 times greater than their rating, such as when a motor starts.

Keep your hands free for other tasks by triggering switches with your foot.

Step on these switches for hands-free actuation in an area with frequent washdowns.

These switches are rated for environments where hazardous material is present.

Install these key switches in 3/4" dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.

Tug on the cable anywhere along your line to immediately cut the flow of power. This multi-functional unit also sends a signal to restart machinery with the push of a button, doing the job of two units in one.

When a moving object contacts the actuator on these switches, they open or close a circuit. They have the rapid-closing action of a snap-acting switch, but with a larger actuator for large objects.

Rated NEMA 3S and IP69K, these switches can handle washdowns with high pressures and temperatures. They’re also protected from oil/coolant spraying, precipitation, and temporary submersion.

Use your smart phone to turn equipment on and off at a set time and day.

Use these relays with industrial automation systems, security and emergency lighting, and small motors.

Using a low-current signal, these relays are often used to control small motors and heaters.

The circular pin terminals plug into relay sockets for easy installation.

Sealed for safety, these relays are a good choice for hazardous locations where combustible or corrosive gases may be present.

Reduce connection errors on circuit boards that control machine guards and other safety devices. These relays take up less space on a board than those with electrical wiring because their solder pin terminals mount directly through circuit board holes.

A NEMA 4X enclosure protects these relays from washdowns, dirt, and corrosion.

Remotely control these relays through an app on your smartphone—they simultaneously monitor phase, voltage, and frequency.

Split run time between two devices—these relays automatically alternate between them.

Control multiple timing functions from your electrical cabinet—these timer relays mount to 35 mm DIN rail (also known as DIN 3 rail), which is the most commonly used size.

Whether installed in an electrical cabinet or hard-to-reach area, these timer relays are controlled remotely from your smartphone. They connect to your phone via a free downloadable app so you can set time delay ranges, adjust settings, and save programs.

Get a variety of timing functions in a single relay.

Regulate temperatures in wet locations for HVAC systems that use direct electrical power, such as air conditioners and heaters.