A rubber seal protects these switches from splashing water.

Maximize the space in a panel—these switches are half the size of most toggle switches.

Mount these switches under your desktop to keep your workspace clear and prevent accidental switching.

A quick push is all it takes to actuate these switches.

The built-in contact block in these switches extends behind the panel half the depth of most other 22 mm switches, saving valuable space.

A base that lights up draws attention to emergency stops. When pushed, these switches immediately cut power.

Sized for 4 mm or 6 mm panel cutouts, these switches are often used with circuit boards to control electronics.

Actuate these switches with the push of a button. Their buttons are distinct colors to help you quickly spot switches without labels.

Actuate these switches with a quick push. A housing seals in anything that could ignite flammable material, so you can use them where ignitable gas and dust may be present.

Immediately cut power with a single push.

Operate low-voltage devices that require less than 48 volts, such as doorbells and buzzers.

Install in 12 mm dia. cutouts.

Install in 14 mm dia. cutouts.

A lightweight yet durable alternative to stainless steel enclosed switches, these aluminum enclosed switches withstand corrosion, oil, and washdowns.

With a stainless steel enclosure, these switches are more durable than aluminum and plastic. They're rated NEMA 4X for protection from corrosion and washdowns.

Made of yellow polycarbonate plastic, these enclosed switches are easy to see and resist dents, chips, and cracks. They are more corrosion resistant than aluminum enclosed switches and withstand washdowns and oil/coolant spraying.

Save space in your setup—these switches double as handles on machines and equipment.

Immediately cut power with a single push.

Clip these switches onto nearby structures made from T-slotted framing to quickly cut power with the push of a button.

Grip and twist a lever to turn these switches on or off—they’re designed to prevent accidental actuation. Install them into standard-sized panel cutouts.

Rated NEMA 4, 13, and IP66, these metal switches are protected from washdowns and oil/coolant spraying. Install them in 30 mm dia. cutouts.

Made for areas where ignitable gas and vapor may be present, these switches have a housing that seals in anything that could spark flammable material.

The enclosure not only protects these switches, but also adds options for how you install them.

Choose from a variety of messages and colored lenses to combine a rocker with a base and wiring socket for a complete switch.

Also known as high-inrush current switches, these switches can handle starting currents up to 10 times greater than their rating, such as when a motor starts.

Rated IP67, these switches are protected from temporary submersion.

Choose an actuator and contact block to make your own 22 mm plastic switch.

Choose an actuator and contact block to make your own 16 mm switch.

Control machinery from a safe distance, or use these switches as call buttons.

Operate equipment from up to 330 feet away—these switches include a transmitter and a receiver that connects to equipment.

Apply pressure from any direction to actuate these switches.

Step on these switches for hands-free actuation in an area with frequent washdowns.

Rated NEMA 4 or IP66, these switches are protected from washdowns.

Sized for 22 mm dia. panel cutouts, these switches require a key to turn circuits on or off, limiting access to sensitive equipment.

Install these key switches in 30 mm dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.

Maximize space in a panel with these miniature switches.

Immediately cut power by pulling the cable.

Rated IP67 and NEMA 6, these switch mats withstand washdowns.

These mats fit under carpeting or anywhere else you want to hide them.

These narrow switches are also thin enough to be hidden under carpeting or installed anywhere space is limited.

Step or press anywhere along the switch to control doors, lights, or alarms.

Prevent personnel from getting too close to dangerous equipment while it’s running. Step anywhere on these mats and they can turn on warning lights and alarms or shut down equipment.

Open and close circuits in a snap—even in harsh conditions. With a rubber-encased housing and stainless steel bracket, these switches handle high vibrations and resist corrosion. They’re rated IP68 for protection from dust and temporary submersion.

Built for tight spaces exposed to water, these switches have a housing that's less than 1" long and IP67 rated for protection from temporary submersion.

Smaller than standard size snap-acting switches, these fit in tight spaces.

Sealed actuators prevent these switches from jamming, even when exposed to oil, sand, mud, or ice.

Rugged enough for mining operations, these limit switches require a high actuation force, like heavy rocks moving on a conveyor.

Also known as interlock switches, these ensure the safety of personnel by automatically shutting off power to machinery when an access door opens. They’re often used with machine guards.

Prevent automatic doors from closing on a person or an object—these switches immediately turn machinery off when actuated with minimal force.

Minimize false triggers—these switches require 10 lbs. of actuation force in order to shut off machinery immediately.

With a smaller diameter and shorter length than standard sized switches, these fit in the most space-constrained areas.

Eliminate the need to calculate the sensing distance when using different metals—these switches sense all metal at the same distance. Also known as K=1 sensors.

The short body on these switches makes them suitable for tight spaces.

These inductive proximity switches sense metallic objects each time they pass through the slot, even when they’re obscured by water, oil, dirt, or a surface finish. Use them to measure the speed of rotating equipment and to count or detect moving objects, such as sheet metal being fed into a stamping process.

Detect aluminum cans, copper tubing, and other metal items that don’t contain iron.

Actuate your switch with precision—these proximity switches have an easy-to-read screen for precise distance inputs, measurements, and troubleshooting.

Most often found in older devices, these switches require AC input voltage.

Rotate the face on these switches five different directions for easy installation and positioning—they work with both AC and DC inputs.