A rubber seal protects these switches from splashing water.

Maximize the space in a panel—these switches are half the size of most toggle switches.

Prevent accidental actuation—these toggle switches must be pulled up before they can switch a circuit.

Simple to use, these switches actuate with a quick push.

Install in 12 mm dia. cutouts.

Because these switches mount flush against a panel, they're easy to clean and hard to damage.

Avoid accidental actuation—these switches won’t turn on or off until you grip and twist the lever. Install in a 16 mm dia. cutout.

Choose from a variety of messages and colored lenses to combine a rocker with a base and wiring socket for a complete switch.

Also known as high-inrush current switches, these switches can handle starting currents up to 10 times greater than their rating, such as when a motor starts.

Maximize space in a panel—these switches are smaller than most standard rocker switches.

Make or break an electrical circuit. These contact blocks mount to manual switches and transmit an electrical signal when the switch actuator is engaged.

Control machinery from a safe distance, or use these switches as call buttons.

Keep your hands free for other tasks by triggering switches with your foot.

Apply pressure from any direction to actuate these switches.

Control equipment from up to 40 feet away—these switches include a transmitter and a receiver that connects to equipment.

Use this switch for intermittent, light-duty applications.

When the pedal is pressed, the built-in potentiometer adjusts the resistance to vary the speed for motor drives.

Install these key switches in 3/4" dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.

Maximize space in a panel with these miniature switches.

Reset fire panels, or open electromagnetic locks, electric strikes, and automatic door openers. These switches require a key to turn circuits on or off, limiting access and preventing accidental activation.

Connect these switches to a cable to control circuits from a distance. They're typically used to turn off production lines and material handling systems.

Smaller and more sensitive than standard snap-acting switches, these switches fit in tight spaces and actuate from light pressure.

Built for tight spaces exposed to water, these switches have a housing that's less than 1" long and IP67 rated for protection from temporary submersion.

Actuate these switches with a fraction of the force of other subminiature switches for increased responsiveness. Among the smallest snap-acting switches we offer, they fit into the tiniest of spaces.

A sealed actuator prevents these switches from jamming, even when exposed to sand, mud, or dirt. With a slim design, you can stack them together or fit them in tight spaces.

Install these switches in a panel cutout to automatically turn electrical equipment on or off after a set interval.