Choosing an Electrical Switch
More
Vibration-Resistant Plastic 22 mm Emergency
Stop Panel-Mount Push-Button Switches
A single-piece construction prevents the contact block from separating from the actuator in high-vibration applications. These switches immediately cut power with a single push. They have positive force contacts that will open a circuit when actuated even if a spring fails or the contacts stick. These switches meet American, Canadian, European, and other global safety requirements. They’re rated NEMA 4X, NEMA 13, and IP65 for protection from corrosion, washdowns, and oil/coolant spraying.
Note: Illuminated switches include a bulb. If wiring the switch and the bulb to the same circuit, the circuit voltage must not exceed bulb voltage.
Continuously illuminated switches stay lit once installed for high visibility in dark areas.
For technical drawings and 3-D models, click on a part number.
| No. of Circuits Controlled | Switch Starting Position | Switch Action | No. of Terminals | Industry Designation | Actuator Color | Switching Current @ Voltage | Max. Voltage  | Bulb Voltage | Dia. | Dp. Behind Panel | For Max. No. of Contact Blocks | Environmental Rating | Each | |
Turn Reset with Screw Terminals | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 | 1 Off (Normally Open) and 1 On (Normally Closed) | Stays Switched (Maintained) | 4 | DPST-1NO/1NC | Red | 3 A @ 220 V AC, 1.1 A @ 110 V DC | 600V AC 600V DC | __ | 1 9/16" | 1 7/8" | 1 | NEMA 4X, NEMA 13, IP65 | 00000000 | 000000 |
| 2 | 2 On (Normally Closed) | Stays Switched (Maintained) | 4 | DPST-NC | Red | 3 A @ 220 V AC, 1.1 A @ 110 V DC | 600V AC 600V DC | __ | 1 9/16" | 1 7/8" | 1 | NEMA 4X, NEMA 13, IP65 | 00000000 | 00000 |
Turn Reset with Screw Terminals—Illuminated (Continuous) | ||||||||||||||
| 2 | 1 Off (Normally Open) and 1 On (Normally Closed) | Stays Switched (Maintained) | 6 | DPST-1NO/1NC | Red | 3 A @ 220 V AC, 1.1 A @ 110 V DC | 600V AC 600V DC | 120V AC | 1 9/16" | 2 3/4" | 4 | NEMA 4X, NEMA 13, IP65, NEMA 3S | 00000000 | 00000 |
| 2 | 1 Off (Normally Open) and 1 On (Normally Closed) | Stays Switched (Maintained) | 6 | DPST-1NO/1NC | Red | 3 A @ 220 V AC, 1.1 A @ 110 V DC | 600V AC 600V DC | 240V AC | 1 9/16" | 2 3/4" | 4 | NEMA 4X, NEMA 13, IP65, NEMA 3S | 00000000 | 00000 |
| 2 | 2 On (Normally Closed) | Stays Switched (Maintained) | 6 | DPST-NC | Red | 3 A @ 220 V AC, 1.1 A @ 110 V DC | 600V AC 600V DC | 120V AC | 1 9/16" | 2 3/4" | 4 | NEMA 4X, NEMA 13, IP65, NEMA 3S | 00000000 | 00000 |
| 2 | 2 On (Normally Closed) | Stays Switched (Maintained) | 6 | DPST-NC | Red | 3 A @ 220 V AC, 1.1 A @ 110 V DC | 600V AC 600V DC | 240V AC | 1 9/16" | 2 3/4" | 4 | NEMA 4X, NEMA 13, IP65, NEMA 3S | 00000000 | 00000 |
Tilt Switches
Often used as position indicators, pump level controls, and machine limit switches, these switches actuate when tilted to a certain angle. They mount horizontally and activate when tilted downward, and deactivate when tilted up. Differential angle is the total angle from the point of activation to the point of deactivation. All combine electromechanical and solid state technologies for reliability and long life.
For technical drawings and 3-D models, click on a part number.
| No. of Circuits Controlled | Switch Starting Position | Industry Designation | Switching Current @ Voltage | Max. Voltage | Differential Angle | No. of Wire Leads | Lg. | Ht. | Dp. | Housing Material | Environmental Rating | Each | ||
With Wire Leads | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| D | 1 | 1 Off (Normally Open) | SPST-NO | 15 A @ 220 V AC | 220V AC | 15° | 3 | 3" | 1.5" | 2" | Plastic | NEMA 4, IP67 | 000000 | 0000000 |
DIN-Rail Mount Solid State Relays
Unlike mechanical relays, these solid state relays have no moving parts, so they require less maintenance and last longer, switch faster, and are quieter. They mount on 35 mm DIN rail (also known as DIN 3) for fast installation. IP20 rated, their terminals are recessed, so they prevent fingers and other objects from touching live circuits.
Relays with an integrated heat sink disperse heat to increase the relay’s current rating.
For technical drawings and 3-D models, click on a part number.
| Number of Terminals | Input Voltage | Control Current, mA | Switching Current @ Voltage (Load Type) | Max. Switching Voltage | hp @ Switching Voltage | Ht. | Wd. | Dp. | Features | Each | |
2 Circuits Controlled with 2 Off (Normally Open)—DPST-NO | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Two Phase | |||||||||||
| 6 | 24V AC, 120V AC, 208V AC, 240V AC, 277V AC, 24V DC, 48V DC, 60V DC, 120V DC | 2 | 25 A @ 220 V AC (Full Load) | 242V AC | 1 1/2 hp @ 115 V AC 3 hp @ 230 V AC | 4.33" | 2.13" | 3.427" | Integrated Heat Sink, LED Indicator | 0000000 | 0000000 |
| 6 | 5V DC, 6V DC, 12V DC, 24V DC, 30V DC | 10 | 25 A @ 220 V AC (Full Load) | 242V AC | 1 1/2 hp @ 115 V AC 3 hp @ 230 V AC | 4.33" | 2.13" | 3.427" | Integrated Heat Sink, LED Indicator | 0000000 | 000000 |