McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    20 Products

    Leveling Jacks with Wheel

    Image of Product. Style A. Front orientation. Contains Annotated. Style A. Leveling Jacks with Wheel.
    Image of Product. Style B. Front orientation. Contains Annotated. Style B. Leveling Jacks with Wheel.
    Image of Product. Style C. Front orientation. Contains Annotated. Style C. Leveling Jacks with Wheel.
    Image of Product. Front orientation. Contains Annotated. Jacks. Leveling Jacks with Wheel, Style D.

    Style A

    Style B

    Style C

    Style D

    Mount these jacks to equipment to raise and level it. A swivel caster lets you reposition your load.
    Warning: Never use to support people or loads over people.
    Through-Hole Mount—Mount jacks through a hole in the frame of your equipment and fasten the mounting plate. These jacks are commonly used with an A-frame trailer coupler.
    Side Mount—Slide the frame of your equipment through the mounting plate.
    Locking Pin—Locking pin locks the jack in a vertical position; pull the pin to rotate the jack into a horizontal position when not in use.
    For
    Frame
    Mounting
    Mounting
    Plate
    Style
    Weight Capacity
    Ht.
    Max.
    Lift
    Overall
    Ht.
    Ht.
    Dp.
    Handle
    Lg.
    Body
    Material
    For Hole
    Dia.
    Fasteners
    Included
    No. of
    Holes
    Hole
    Lg.
    Hole
    Wd.
    Lg.
    Wd.
    Wheel
    Material
    Each
    Clamp On Side Mount
    A1/4 ton/750 lb.7 1/2" to 23 1/2"16"27 7/8"0" to 5"1 7/8" to 2 7/8"5 1/2"Steel—Yes—————Plastic2958T60000000
    B1/2 ton/1,000 lb.10 13/16" to 25 1/2"14 11/16"33 7/8"3" to 5"2" to 3"6 1/8"Steel—Yes—————Plastic8792T31000000
     
    Clamp On Side Mount with Locking Pin
    C1/2 ton/1,200 lb.12 1/2" to 22 1/2"10"28 1/8"2" to 4"1 1/2" to 3"6"Steel—Yes—————Plastic8792T44000000
    C3/4 ton/1,500 lb.12 7/8" to 22 7/8"10"31 5/8"3" to 5"2" to 3"6 1/8"Steel—Yes—————Plastic8792T32000000
     
    Bolt On/Through-Hole Mount
    D1/2 ton/1,200 lb.8 5/8" to 21 1/2"12 7/8"35 5/8"——6 1/2"Steel2 1/4"No37/16"13/16"5 1/8"4 1/4"Plastic2933T62000000
     

    Wrench-Adjustable Screw Jacks

    Image of Product. Front orientation. Jacks. Wrench-Adjustable Screw Jacks, Swivel Saddle.

    Swivel Saddle

    Use these low-profile jacks in confined spaces. The screw adjustment lets you make small changes to the height of your load.
    Warning: Never use to support people or loads over people.
    Swivel Saddle—Jacks with swivel saddle keep loads from slipping. Also known as planer jacks, they have a side locking screw that keeps the jack extended and prevents lowering due to vibration.
    Saddle
    Weight Capacity
    Ht.
    Max.
    Lift
    Type
    Dia.
    Swivel
    Angle
    Base
    Wd.
    Body
    Material
    Each
    Swivel Saddle
    2 ton/4,000 lb.2 3/4" to 3 3/4"1"Flat1 1/4"25°2 3/8"Iron8791T60000000
    4 ton/8,000 lb.3 3/4" to 5 1/4"1 1/2"Flat1 3/4"25°3 1/8"Iron8791T5000000
    6 ton/12,000 lb.5 1/4" to 7 1/2"2 1/4"Flat2 1/8"25°4"Iron8791T7000000
    8 ton/16,000 lb.7 1/2" to 11 1/2"4"Flat2 1/2"25°5 3/8"Iron8791T8000000
     

    Bar-Adjustable Screw Jacks

    Image of System. Shown with Turning Bar. Front orientation. Jacks. Bar-Adjustable Screw Jacks.

    Shown with Turning Bar

    The turning bar (sold separately) gives you leverage to lift heavier loads than wrench-adjustable screw jacks. The screw adjustment lets you make small changes to the height of your load. The saddle swivels to keep loads from slipping. The jack head has multiple openings so you can choose the best angle for inserting the turning bar.
    Warning: Never use to support people or loads over people.
    Saddle
    Weight Capacity
    Ht.
    Max.
    Lift
    Type
    Dia.
    Swivel
    Angle
    Base
    Dia.
    Body
    Material
    Each
    Swivel Saddle
    12 ton/24,000 lb.9 5/8" to 13 3/8"3 3/4"Flat2 7/8"9°4 3/4"Iron2926T130000000
    12 ton/24,000 lb.11 5/8" to 17 3/8"5 3/4"Flat2 7/8"9°5 1/2"Iron2926T14000000
    12 ton/24,000 lb.15 3/4" to 25 1/2"9 3/4"Flat2 7/8"9°6 1/4"Iron2926T16000000
    20 ton/40,000 lb.11 7/8" to 16 7/8"5"Flat3 1/8"9°6"Iron2926T18000000
    20 ton/40,000 lb.13 3/4" to 20 3/4"7"Flat3 1/8"9°6 1/2"Iron2926T19000000
    20 ton/40,000 lb.15 3/4" to 24 3/4"9"Flat3 1/8"9°6 3/4"Iron2926T21000000
    24 ton/48,000 lb.17" to 25 1/4"8 1/4"Flat3 1/4"9°7 1/4"Iron2926T24000000
    24 ton/48,000 lb.23" to 37 1/4"14 1/4"Flat3 1/4"9°8 1/2"Iron2926T27000000
     
    Jack Turning Bars
    Each
    24" Long Turning Bar for 12 tons (24,000 lbs.) Capacity Jacks2926T42000000
    42" Long Turning Bar for 24 tons (48,000 lbs.) Capacity Jacks2926T44000000
    36" Long Turning Bar for 20 tons (40,000 lbs.) Capacity Jacks2926T4300000
    back to top