We will reply to your message within an hour.
Designed to stand up to heavy use, these latches are often seen on refrigerators and truck doors.
These latches are reversible for right- and left-hand mounting.
Tighten the screw on the strike plate to secure the bar and prevent accidental unlatching.
Latches snap shut when you push the bar in the strike plate to prevent accidental unlatching. Press the button on the strike plate to release the bar.
In addition to being padlockable, these heavy duty latches come with two handles for access from the inside as well as the outside. They are often used on refrigerators and truck doors.
To prevent accidental unlatching due to vibration, there's a bushing in the eye.
Turn the padlock eye to fasten these hasps without a padlock.
The T-handle lays flush in the recess, so you won’t bump into or catch your clothes on these latches. Also called quarter-turn latches, they have a cam that rotates 90° to secure enclosures.
With a flat inset grip, the handle is recessed to stay out of the way.
Fold the ring handle into the recess to stay out of the way when not in use.
Designed for food-processing and hygienic applications, these corrosion-resistant latches are FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food.
Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.
The mounting screws on these latches are concealed to prevent tampering.
Prevent water, dirt, and dust from getting into your cabinets and file drawers through the latch during low-pressure washdowns.
Raise the handle and it swings smoothly for easy latching and unlatching.
Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a tight hold. They’re often used for securing cabinet doors and file drawers.
Use these latches with three-point locking systems, such as those on filing cabinet doors.
Designed for smaller-than-standard through holes, these latches are often used for securing doors and drawers.
These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.
Grip and turn the ring handle to open and close doors and drawers, then fold it out of the way when you are done.
Designed for use in 1/2" dia. through holes.
Use these latches in a 3/4" dia. through hole, which is the most common through-hole size.
These latches are IP65 rated for protection against dust, dirt, and washdowns.
When not in use, fold the handle into the recess to keep it out of the way. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal.
With a molded inset grip, the handle remains recessed to stay out of the way.
In addition to an IP65 rating for low-pressure washdown environments, these locks have a squeeze-release handle to prevent accidental opening when unlocked.
These locks are IP65 rated for protection against dust, dirt, and washdowns.
Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
The attached metal arm rotates to lock cabinet doors and file drawers. These locks are keyed alike, so they’re good for when you need several locks that open with the same key.
Choose these locks if you need each one to open with a different key.
Open these locks with both a master key and their own unique key.
For a simplified keying system, these cam locks open and close with a slotted screwdriver. Also called quarter-turn locks, they have a cam that rotates 90° to lock cabinet doors and other enclosures.
A master key opens all of these locks, which also have their own unique keys.
A hex key (not included) opens and closes these cam locks, simplifying your keying system. Also known as quarter-turn locks, they have a cam that rotates 90° to lock cabinet doors and other enclosures.
Install these locks in smaller-than-standard-diameter through holes on cabinet doors and file drawers. They’re keyed alike, so they’re a good choice when you need several locks that open with the same key.
Secure enclosure doors with these L-handle locks. Choose them if you need several locks that open with the same key.
Open each of these locks with a different key.
Latch and lock doors and cabinets with these swing-handle cam locks, and unlock them with a four-number combination code.
With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets.
Designed for protection against dust, dirt, and washdowns, these padlockable latches are IP65 rated.
These padlockable latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.
Choose these keyed alike locks if you need several that open with the same key.
Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors.
Use these latches alone for single-point latching, or add latch kits for more holding power.
Choose these locks if you need several that open with the same key.
A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors.
Choose these L-handle locks if you need several that open with the same key.
Use these latches alone for single-point latching or add latch kits for multiple-point latching and extra holding power.
The ring handle is recessed to stay out of the way when not in use. Latches arrive ready for single-point latching. For more holding power, add a latch kit for two-point latching, or add two latch kits for three-point latching.
Choose these keyed alike locks when you need several that open with the same key.
Often used on casement windows.
Maintain security by keeping your door latched as you open it up to 3".
These concealed latches snap together—no mounting fasteners required.
Slide these latches into the strike plate to secure bathroom doors.
Hold bathroom doors closed by swinging these latches into a notch in the strike plate.
These snaps have an eye that rotates for easy positioning.
The force of the load helps keep the arms closed. Press the trigger for quick connection and disconnection.
Lock the bolt with wire or a cable tie for a secure connection.
Rotate these hooks for easy positioning before lifting your load. They have a latch that locks when a load is applied for a more secure connection than standard hooks.
For a more secure connection than standard hooks, these hooks have a latch that locks closed when a load is lifted. A ball-bearing swivel allows them to rotate under a load.
These have a latch that locks closed when a load is applied for a more secure connection than standard hooks. They rotate for easy positioning before a load is applied.
A ball-bearing swivel allows these hooks to rotate under load. Attach to chain by inserting the included pin through a link.
These rotate for easy positioning before a load is applied.
Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens.
The opening on these hooks fits large anchor points and allows chain to slide through when the hook is closed. They have a spring latch to ensure rope, chain, and fittings won't detach from the hook when the load slackens.
Garolite insulation prevents electrical current from passing to hoists and other lifting equipment, causing damage. Because they're electrical insulating, these hooks are often used to hold a workpiece while welding.
These swivel hooks have a latch that ensures rope, chain, and fittings won't separate from the hook when the load slackens.
Attach a rope to the ring on the pin for remote release where access in limited. These shackles have an eye end for connecting to a hook.
Attach a rope to the ring on the pin for remote release where access is limited. These shackes have a clevis end for making pivoting connections.
The latch on these hooks snaps closed to hold items securely.