About Rotating Joints
Rotating joints transfer hot and cold materials from your supply line to a continuously revolving drum, roller, or other rotating equipment.
Pipe size is an industry designation, not the actual size. View information about how to measure pipe size threads.
More
About Leveling Mounts
More
About Vibration-Damping Mounts
More
Aluminum One-Way-Flow Rotating Joints
- For Use With: Air, Hydraulic Oil
- Temperature Range: See table
- Maximum Pressure:
Air: 150 psi @ 72° F
Oil: See table - Maximum Vacuum: 28 in. of Hg @ 72° F
These joints have a rotating shaft with threads on one end that connect to a continuously revolving drum, roller, or other rotating equipment. Use them to transfer hot and cold materials from your supply line. Joints are for one-way flow and are meant to be used in pairs—one joint serves as the supply line while the other serves as the return line. Joints are made of lightweight aluminum. They are a compact size for use in small air and hydraulic applications.
If your drum rotates counterclockwise as you face the connecting end, you should select a rotating joint with right-handed threads.
For technical drawings and 3-D models, click on a part number.
Rotating Threads | Stationary Threads | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size  | Thread Type | Gender | Pipe Size | Thread Type | Gender | Max. Speed, rpm | Body Dia. | Lg. | Max. Oil Pressure | Temperature Range, °F | Shaft Material | Each | |
Right-Hand Rotating Threads | |||||||||||||
| 1"-14 | UNF | Male | 3/4 | NPT | Female | 3,500 | 2 7/8" | 5" | 1,000 psi @ 72° F | -20° to 250° | Stainless Steel | 0000000 | 0000000 |
Quick-Install Vibration-Damping Leveling Mounts with Threaded Stud
A two-piece design simplifies installation and requires less clearance than one-piece mounts. Use these mounts to minimize vibration and noise to prolong machine life and protect floors. Their cushion grips the floor for stability and is resistant to oil and grease. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Base Dia. | Overall Ht. | Temperature Range, °F | Each | |
Steel with Rubber Cushion and Zinc-Plated Steel Stud | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1"-14 | 8" | 13,000 | 0.12" | 9" | 10 1/4" | -20° to 180° | 00000000 | 0000000 |