Plastic Syringes
Made of plastic, these syringes are shatter resistant and suitable for use with a variety of liquids. However, they’re not as scratch resistant as glass or stainless steel syringes and less precise than glass ones.
Syringes with a luer lock connection have a more secure needle connection than syringes with a luer slip connection. They connect to needles with a luer lock connection to dispense contents. Twist the needle into place to secure the hold. Syringes with a luer slip connection connect to needles with a luer lock connection simply by sliding the needle onto the fitting—it will be held in place by friction rather than a locking mechanism.
Autoclavable syringes can be sterilized for reuse. Repeated sterilization may lead to discoloration over time.
Plastic Syringes with Taper Tip
No need to connect a needle or tip—just trim the opening size of these syringes to the diameter you need. Widen the opening of the tip for increased flow when dispensing thick liquids.
Capacity | Barrel | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| ml | fl. oz. | Graduation Marks | Tip ID | OD | ID | Lg. | Material | Piston Material | Autoclavable | Each | |
Taper Tip | |||||||||||
Clear | |||||||||||
| 60 | 2 | 1 ml | 0.290" | 1.36" | 1.26" | 5 5/8" | Polypropylene Plastic | EPDM Rubber | Yes | 00000000 | 00000 |
Bulb Dispensers
Also known as basters, these dispensers transfer larger amounts of liquid than bulb droppers. Liquids are dispensed in a stream, rather than drop by drop. These dispensers are two pieces, so you can remove the bulb for easy cleaning.
Stainless steel dispensers are more durable than plastic and glass dispensers. They also withstand high heat. Tempered glass dispensers resist staining better than plastic dispensers. They also withstand high heat.
Clear and semi-clear dispensers let you see the liquid inside and confirm the exact volume, unlike silver dispensers.
Dispensers with an injector tip can puncture through a surface to dispense liquid on the inside.
Reagent Reservoirs
Hold reagents and samples for easy access during pipetting. These reservoirs have an angled bottom, so you can collect samples even as your liquid starts to run low.
Rectangular reservoirs have molded graduation marks to see how much liquid is inside. There’s a pour spout on each corner to discard excess liquid.
V-shape reservoirs have a single large reservoir on one side and 8- and 12-chamber reservoirs on the other. Useful for multi-channel pipettors, the smaller chambers reduce the risk of waste. They’re often used to hold different reagents or ratios and for serial dilutions. Made of polypropylene, they can be autoclaved for reuse.
Compartment | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap., ml | Lg. | Wd. | Numeric Increments, ml | Lg. | Wd. | Ht. | Material | Color | Autoclavable | Features | Pkg. Qty. | Pkg. | |
| 10 | 3 1/2" | 1 5/8" | 10 | 4" | 2" | 7/8" | Polystyrene Plastic | White | No | Pour Spout | 100 | 0000000 | 000000 |
Compartment | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of | Cap., ml | Lg. | Wd. | Ht. | Lg. | Wd. | Ht. | Material | Color | Autoclavable | Features | Each | |
| 1 8 12 | 50 5 5 | 4 5/8" 2 1/8" 2 1/8" | 2 1/8" 5/16" 5/16" | 1" 1" 1" | 4 3/4" | 2 3/16" | 1 1/16" | Polypropylene Plastic | White | Yes | Double-Sided | 000000 | 00000 |