T-Slotted Framing Locks and Latches

Filter by

Rail Height

Latch Type

T-Slotted Framing Rail Profile

T-Slotted Framing Component

Material

Magnetic Latch Connection

Lock Type

Mounting Fastener Thread Size

6-32

1/4"-20

5/16"-18

System of Measurement

Color

Handle Style

Mount Type

Width

Bracket Type

Height

Locking-Slotted Framing Component

Mounting Location

Length

Latch Entry Location

Mounting Fastener Installation Type

Finish

REACH

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

RoHS

Compliant

Compliant with Exemptions

Corner Bracket Style

73 Products

About Push-to-Close Latches

T-Slotted Framing Locks and Latches

Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.

Magnetic Latches—Nonlocking

Rail-to-Rail Magnetic Latch

Rail-to-Panel Magnetic Latch

Magnetic latches secure doors and panels with magnets. They require a gap between the two rails for doors to close properly.

For Rail Ht.
Single	Double, Quad	Triple	Color	Material	Wd.	Ht.	Required Door Gap	For Max. Panel Thick.	Mounting Fasteners Included		Each
Rail-to-Rail
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Black	Plastic	2 1/8"	1 9/16"	3/16"-1/4"	__	Yes	00000000	000000
45mm	90mm	__	Black	Plastic	2 1/8"	1 9/16"	3/16"-1/4"	__	Yes	00000000	00000
Rail-to-Panel
1", 1 1/2"	2", 3"	3", 4 1/2"	Silver	Anodized Aluminum	7/8"	2 3/32"	__	3/16"	Yes	000000000	00000
20mm	40mm	__	Black	Plastic	9/16"	1 1/8"	__	3/16"	Yes	0000000	00000
30mm	60mm	__	Black	Plastic	9/16"	1 1/8"	__	3/16"	Yes	00000000	00000
40mm	80mm	120mm	Black	Plastic	3/4"	1 9/16"	__	3/16"	Yes	0000000	00000
45mm	90mm	__	Black	Plastic	3/4"	1 9/16"	__	3/16"	Yes	00000000	00000

Slide Bolt Latches—Nonlocking

Slide Bolt Latch

For Rail Ht.
Single	Double, Quad	Triple	Color	Material	Wd.	Ht.	Mounting Fasteners Included		Each
Rail-to-Rail
1", 1 1/2"	2", 3"	3", 4 1/2"	Silver	Anodized Aluminum	3"	1 1/2"	Yes	00000000	000000
20mm	40mm	__	Silver	Zinc	3 1/16"	1 1/2"	Yes	00000000	00000
30mm	60mm	__	Silver	Zinc	3 1/16"	1 1/2"	Yes	00000000	00000
40mm	80mm	120mm	Silver	Zinc	3 1/16"	1 1/2"	Yes	00000000	00000
45mm	90mm	__	Silver	Zinc	3 1/16"	1 1/2"	Yes	00000000	00000

Push-to-Close Latches—Nonlocking

Push-to-Close Latch

Push-to-Close Latch with Edge Pull Handle

Push-to-Close Latch with Lifting Pull Handle

Push-to-Close Latch with Paddle Handle

Push-to-Close Latch for Double Doors

Release Knob

Push-to-close latches have a return spring to snap tight with a push and release with a pull. Release knobs offer a means of escape if a door closes with someone inside an enclosure.

Latches
For Rail Ht.										Release Knobs
Single	Double, Quad	Triple	Color	Material	Wd.	Ht.	Mounting Fasteners Included		Each		Each
Rail-to-Rail
Push-to-Close Latches
1 1/2"	3"	4 1/2"	Black	Plastic	2 1/4"	2 9/16"	Yes	00000000	000000	000000	00
Push-to-Close Latches with Edge Pull Handle
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Black	Powder-Coated Aluminum	3 7/8"	3 1/16"	Yes	00000000	00000	00000000	000000
30mm	60mm	__	Black	Powder-Coated Aluminum	3 3/4"	3 1/16"	Yes	00000000	00000	000000	00
45mm	90mm	__	Black	Powder-Coated Aluminum	3 3/4"	3 1/16"	Yes	00000000	00000	00000000	00000
Push-to-Close Latches with Lifting Pull Handle
1 1/2"	3"	4 1/2"	Black	Plastic	2 1/4"	2 9/16"	Yes	00000000	00000	000000	00
Push-to-Close Latches with Paddle Handle
40mm	80mm	120mm	Gray	Plastic	3 3/8"	1 9/16"	Yes	00000000	00000	000000	00
Push-to-Close Latches for Double Doors
45mm	90mm	__	Silver	Zinc-Plated Steel	2 9/16"	5/8"	Yes	00000000	00000	000000	00

Push-to-Close Locks—Keyed Alike

Push-to-Close Lock

Push-to-Close Locks
for Double Doors with
Edge Pull Handle

Keyed Alike

Release Knob

Push-to-close latches have a return spring to snap tight with a push and release with a pull. Release knobs offer a means of escape if a door closes with someone inside an enclosure.

Locks
For Rail Ht.											Release Knobs
Single	Double, Quad	Triple	Color	Material	Wd.	Ht.	No. of Keys Included	Mounting Fasteners Included		Each		Each
Rail-to-Rail
Push-to-Close Locks with Edge Pull Handle
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Black	Powder-Coated Aluminum	3 7/8"	3 1/16"	2	Yes	00000000	000000	00000000	000000
30mm	60mm	__	Black	Powder-Coated Aluminum	3 3/4"	3 1/16"	2	Yes	00000000	00000	000000	00
45mm	90mm	__	Black	Powder-Coated Aluminum	3 3/4"	3 1/16"	2	Yes	00000000	00000	00000000	00000
Push-to-Close Locks for Double Doors with Edge Pull Handle
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Black	Powder-Coated Aluminum	6 1/8"	3 1/16"	2	Yes	00000000	00000	00000000	00000
30mm	60mm	__	Black	Powder-Coated Aluminum	6 1/8"	3 1/16"	2	Yes	00000000	00000	000000	00
45mm	90mm	__	Black	Powder-Coated Aluminum	6 1/8"	3 1/16"	2	Yes	00000000	00000	00000000	00000

Grab Latches—Nonlocking

Rail-to-Rail Grab Latch
with Replaceable
Latching Screw

Rail-to-Rail Grab
Latch with Force
Adjustment Screw

Rail-to-Rail Grab Latch with Back Grab Direction

Rail-to-Panel Grab Latch

Rail-to-Panel Grab
Latch with Force
Adjustment Screw

Grab latches work well on lightweight doors. They have a catch that grabs and holds a ball, latching screw, or strike plate to keep doors shut. Rail-to-rail grab latches require a gap between the two rails for doors to close properly. Rail-to-panel grab latches have a ball that threads into a tapped hole on the panel.

Grab latches with left, right, and front grab direction work on sliding or swinging doors when the ball or strike plate is clipped into the front or side of the latch. Those with back grab direction can also be mounted on the inside or outside of your door.

Grab latches with a replaceable latching screw accommodate different door gaps if you switch out the included screw for one of a different length (not included). Install the latching screw in the slot of the opposite rail. Those with a force adjustment screw let you control how hard it is to open and close the latch.

For Rail Ht.
Single	Double, Quad	Triple	Color	Material	Wd.	Ht.	Required Door Gap	For Max. Panel Thick.	Mounting Fasteners Included	Features		Each
Rail-to-Rail
Grab Latches with Front Grab Direction
30mm	60mm	__	Black	Plastic	13/16"	3 21/32"	15/32"	__	Yes	Replaceable Latching Screw	00000000	000000
40mm	80mm	120mm	Black	Plastic	13/16"	3 21/32"	15/32"	__	Yes	Replaceable Latching Screw	00000000	00000
Grab Latches with Left, Right, and Front Grab Direction
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Silver	Anodized Aluminum	2 17/32"	4"	1/8"-1/4"	__	Yes	Force Adjustment Screw	00000000	00000
Grab Latches with Left, Right, Front, and Back Grab Direction
1", 25mm	2", 50mm	3"	Black	Plastic	3"	2 29/32"	1/8"	__	Yes	__	00000000	00000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Black	Plastic	3"	2 29/32"	3/16"	__	Yes	__	00000000	00000
30mm	60mm	__	Black	Plastic	3"	2 29/32"	1/8"	__	Yes	__	00000000	00000
45mm	90mm	__	Black	Plastic	3"	2 29/32"	1/4"	__	Yes	__	00000000	00000
Rail-to-Panel
Grab Latches with Left, Right, and Front Grab Direction
1", 1 1/2"	2", 3"	3", 4 1/2"	Black	Plastic	1 1/8"	1 29/32"	__	3/8"	Yes	__	00000000	00000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Silver	Chrome-Plated Brass	17/32"	2 3/8"	__	1/4"	Yes	Force Adjustment Screw	00000000	00000
20mm	40mm	__	Silver	Chrome-Plated Brass	7/16"	1 15/16"	__	5/32"	Yes	Force Adjustment Screw	00000000	00000
30mm, 40mm	60mm, 80mm	120mm	Black	Plastic	1 1/8"	1 29/32"	__	3/8"	Yes	__	0000000	00000
45mm	90mm	__	Silver	Chrome-Plated Brass	19/32"	2 11/16"	__	1/4"	Yes	Force Adjustment Screw	00000000	00000

Hook and Loop Latches—Nonlocking

Hook and Loop Latch

Hook and loop latches are for light duty applications where you need easy access, such as display cases.

For Rail Ht.
Single	Double, Quad	Triple	Color	Material	Wd.	Ht.		Each
Rail-to-Rail
1 1/2"	3"	4 1/2"	Silver	Anodized Aluminum	2"	2 7/8"	0000000	000000
40mm	80mm	120mm	Silver	Anodized Aluminum	2"	2 7/8"	00000000	00000

Cam Locks—Keyed Alike

Rail-to-Rail Cam Lock

Rail-to-Panel Cam Lock

Rail-to-Panel Cam Lock with Edge Pull Handle

Keyed Alike

Cam locks have a slim profile when the door is shut because their locking mechanism attaches inside the slot of the opposite rail. An additional doorstop is recommended. They're keyed alike, which is useful if you need several locks that open with the same key. Rail-to-rail cam locks require a gap between the two rails for doors to close properly. Rail-to-panel cam locks mount in a bored hole on your panel.

Left-hand cam locks have a bar that swings counterclockwise into a groove left of the door. Right-hand cam locks have a bar that swings clockwise into a groove to the right of the door.

For Rail Ht., mm
Single	Double, Quad	Triple	Color	Material	Mounting Orientation	Wd.	Ht.	Required Door Gap	For Max. Panel Thick.	No. of Keys Included	Mounting Fasteners Included		Each
Rail-to-Rail
Cam Locks
40	80	120	Black	Plastic	__	1 3/4"	4 3/4"	7/8"	__	2	Yes	00000000	0000000
Rail-to-Panel
Cam Locks
40	80	120	Black	Plastic	Left Hand	1 1/4"	2 1/16"	__	5/16"	1	Yes	00000000	000000
40	80	120	Black	Plastic	Right Hand	1 1/4"	2 1/16"	__	5/16"	1	Yes	00000000	000000
Cam Locks with Edge Pull Handle
40	80	120	Black	Plastic	Left Hand	2 11/16"	2 1/16"	__	5/16"	1	Yes	00000000	000000
40	80	120	Black	Plastic	Right Hand	2 11/16"	2 1/16"	__	5/16"	1	Yes	00000000	000000

Locking Door Handles—Keyed Differently

Locking Door Handle with Lever Handle

Keyed Differently

Replacement Lock Cylinder

Door handles let you add a push-to-close latch and lockable handles to both sides of your door without any machining. A guard over the latch prevents prying by concealing the mounting screws. The part of the latch with the handle and lock cylinder should be mounted to a rail that has a panel attached to it. If the panel is solid, you’ll need to drill holes for the handle and lock cylinder.

Handles
For Rail Ht., mm														Replacement Lock Cylinders
Single	Double, Quad	Triple	Color	Material	Mounting Orientation	Wd.	Ht.	For Max. Panel Thick.	No. of Keys Included	Mounting Fasteners Included	Features		Each		Each
Rail-to-Rail
Locking Door Handles with Lever Handle
30, 40	60, 80	120	Black	Plastic	Left Hand or Right Hand	9 1/16"	11"	1"	3	Yes	Pry Resistant	00000000	0000000	00000000	000000

Gate Latches—Padlockable

Gate Latch

Gate locks latch themselves when you push them closed, meaning the catch grabs and holds the strike plate to keep doors shut. Pull up on the latch arm to open. They have a hole for a padlock (not included).

For Rail Ht.
Single	Double, Quad	Triple	Color	Material	Wd.	Ht.	For Max. Padlock Shackle Diameter	For Panel Mounting Fastener Thread Size	Mounting Fasteners Included		Each
Rail-to-Panel
1"	2"	3"	Silver	Stainless Steel	4 3/4"	1 3/4"	5/16"	M4.2	Yes	0000000	000000
1 1/2"	3"	4 1/2"	Silver	Stainless Steel	4 3/4"	1 3/4"	5/16"	M4.2	Yes	0000000	00000

T-Slotted Framing Mounting Brackets

Attach sensors, tubes, and other components to T-slotted framing rails and structures.

For technical drawings and 3-D models, click on a part number.

Locking Collars for Single and Quad Rails

Locking Collar

Locking collars mount to a quad rail with the included fasteners. Slide a single rail in to create a telescoping rail. They require tapped holes at the end of the quad rail for installation.

For Rail Ht.	Wd.	Lg.	Color	Material	Required Tap Thread Size	Mounting Fasteners Included		Each
1 1/2", 3"	3"	3"	Blue	Anodized Aluminum	5/16"-18	Yes	00000000	000000
40mm, 80mm	3"	3"	Gray	Anodized Aluminum	M8	Yes	00000000	00000

Heavy Duty Locking-Slotted Framing and Fittings

Build structures that stand up to more vibration and movement than T-slotted framing but with the same versatility and installation ease. Instead of T-shaped slots, these rails have slots that turn up and inward to keep connections rigidly locked together. Use them to make strong and stable platforms, machine bases, and much more.

These rails are not compatible with components designed to fit in T-slots.

For technical drawings and 3-D models, click on a part number.

Rails

Rail Ht., mm	Rail Wd., mm	Rail Construction	Locking-Slot Opening Angle	Center Hole Dia., mm	Material		1 ft.	2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.
40	40	Solid	40°	6.8	Anodized Aluminum	00000000	000000	000000	000000	000000	0000000	0000000	0000000	0000000

Corner Brackets

Open Gusset

Extended Open Gusset

Corner brackets are self-aligning and won’t loosen or slip from vibration. They have angled mounting holes for anchoring to the inside of rails. Special angled fasteners come attached for fast installation. To limit sway for added stability, these brackets are reinforced with gussets.

Open Gusset
For Rail Ht., mm	Lg.	Color	Material	Features		Each
40	2"	Black	Anodized Aluminum	Quick-Install Angled Fasteners	0000000	000000
Extended Open Gusset
40	3"	Black	Anodized Aluminum	Quick-Install Angled Fasteners	0000000	00000

Surface Brackets

Straight

90° Angle

Surface brackets are self-aligning and won’t loosen or slip from vibration. They have angled mounting holes for anchoring to the inside of rails. Special angled fasteners come attached for fast installation.

Straight
For Rail Ht., mm	Lg.	Color	Material	Features		Each
40	5"	Black	Anodized Aluminum	Quick-Install Angled Fasteners	0000000	000000
90° Angle
40	5 1/2"	Black	Anodized Aluminum	Quick-Install Angled Fasteners	0000000	00000

Mounting Brackets

Corner

Open Gusset

Use mounting brackets to secure benchtops and other components to rails, attach assemblies, or transition to other framing systems. One of their legs has an angled mounting hole for anchoring to the inside of a rail. Special angled fasteners come attached to it for fast installation.

Open gusset brackets are reinforced to limit sway, adding stability.

Corner
For Rail Ht., mm	Lg.	Color	Material	For Mounting Orientation	Mounting Fasteners Included	Mounting Hole Dia., mm	Features		Each
40	1 1/2"	Black	Anodized Aluminum	Perpendicular	Yes	8.5	Quick-Install Angled Fasteners	0000000	000000
Open Gusset
40	1"	Black	Anodized Aluminum	Parallel	Yes	22	Quick-Install Angled Fasteners	0000000	00000

End Caps

End caps snap onto rails to protect ends from damage. They also keep out dust and grime.

For Rail Ht., mm	Color	Material	Mount Type		Each
40	Black	ASA Plastic	Push In	0000000	00000

Mounting Feet

Mounting feet have a flange for attaching to floors, walls, and ceilings. Their height is fixed. For fast installation, secure them to rails with the special angled fasteners that come attached.

	Lg.
For Rail Ht., mm	(A)	(B)	Color	Material	Mounting Fasteners Included	Mounting Hole Dia., mm	Features		Each
40	3"	2"	Black	Anodized Aluminum	Yes	14.3	Quick-Install Angled Fasteners	0000000	000000

Nuts

End-Feed

Drop-In

End-Feed Nut

Drop-In Nut

Connect other components to rails by attaching an M6 fastener (not included) to these nuts.

End-feed nuts slide into the end of a rail.

Drop-in nuts can be placed directly in a rail slot, so you don’t need to take apart your existing structure.

				Mounting Hole
For Rail Ht., mm	Lg., mm	Material	Mounting Fasteners Included	Location	Thread Size		Each
End-Feed
Double Nut
40	39	Zinc-Plated Steel	No	Offset	M6 × 1 mm	0000000	00000
Single Nut
40	19	Zinc-Plated Steel	No	Offset	M6 × 1 mm	0000000	0000
Drop-In
Single Nut
40	16.5	Zinc-Plated Steel	No	Center	M6 × 1 mm	0000000	0000

Push-to-Close Latches with Edge-Pull Handle

Side Handle

Center Handle

An edge-pull handle fits where traditional handles don’t and makes these latches easy to open. Often used on T-slotted framing, these latches have a two-piece design. Quickly push them closed to secure doors. A convenient alternative to cam and draw latches, they don’t require you to turn a cam or pull a latch to close.

For technical drawings and 3-D models, click on a part number.

				Strike Plate			Mounting
Lg.	Wd.	Projection	Mounting Hole Ctr.-to-Ctr.	Lg.	Wd.	Mounting Hole Ctr.-to-Ctr.	Fasteners Included	Screw Size		Each
Side Handle
Zinc—Dull
1 3/4"	2 13/16"	1 5/16"	2 3/16"	1 9/16"	2 13/16"	2 3/16"	No	M6	0000000	000000
Black Powder-Coated Zinc
1 3/4"	2 13/16"	1 5/16"	2 3/16"	1 9/16"	2 13/16"	2 3/16"	No	M6	0000000	00000
Center Handle
Black Painted Zinc
2 3/16"	2 3/8"	1 1/8"	1 5/8"	15/16"	2 3/8"	1 5/8"	No	M6	0000000	00000

Push-to-Close Latches with Edge-Pull Handle for Sliding Doors

Quickly push to secure sliding doors. An edge-pull handle fits where traditional handles don’t and makes these latches easy to open. Often used on T-slotted framing, they have a two-piece design.

For technical drawings and 3-D models, click on a part number.

					Strike Plate			Mounting
Max. Latching Distance	Lg.	Wd.	Projection	Latch Bolt Projection	Wd.	Ht.	Mounting Hole Ctr.-to-Ctr.	Fasteners Included	Screw Size	Hole Ctr.-to-Ctr.		Each
Black Powder-Coated Zinc
1/16"	2 15/16"	2 5/8"	1 3/16"	1/4"	15/16"	2 15/16"	2 3/16"	No	M6	2 3/16"	0000000	000000

Keyed Push-to-Close Locks with Edge-Pull Handle

Side Handle

Center Handle

Pull the edge of the lock to open your door—the low-profile grip fits in tight spaces. Mount one piece of the lock to the face of the door and the other piece to the door opening. These locks are a convenient alternative to cam and draw locks since they don’t require you to turn a cam or pull a latch. They are typically found on t-slotted framing but can be used on any hinged door. Choose them if you need several locks that open with the same key.

For technical drawings and 3-D models, click on a part number.

				Strike Plate				Mounting
Max. Latching Distance	Lg.	Wd.	Projection	Material	Lg.	Wd.	Mounting Hole Ctr.-to-Ctr.	Fasteners Included	Screw Size	Hole Ctr.-to-Ctr.	Key No.	No. of Keys Included		Each
Side Handle
Black Powder-Coated Zinc
1/32"	4 1/8"	2 7/8"	1 5/16"	Zinc	1 9/16"	2 7/8"	2 1/4"	No	M6	2 1/4"	9333	2	0000000	000000
Gray Powder-Coated Zinc
1/32"	4 1/8"	2 7/8"	1 5/16"	Zinc	1 9/16"	2 7/8"	2 1/4"	No	M6	2 1/4"	9333	2	0000000	00000
Center Handle
Black Powder-Coated Zinc
1/8"	3 1/4"	2 3/8"	1 1/8"	Zinc	15/16"	2 3/8"	1 11/16"	No	M6	1 11/16"	1333	2	0000000	00000

Keyed Push-to-Close Locks with Edge-Pull Handle for Sliding Doors

For use on on sliding doors—including those on T-slotted framing systems—these locks have a two-piece design that locks when pushed closed. An edge-pull handle makes these locks easy to open and fits where traditional handles don’t. Compared to cam and draw locks, these locks are more convenient because they easily latch with a single push.

Choose keyed alike locks when you need several locks that open with the same key. Choose keyed differently locks when you need locks that each open with a different key.

For technical drawings and 3-D models, click on a part number.

					Strike Plate			Mounting
Max. Latching Distance	Lg.	Wd.	Projection	Latch Bolt Projection	Ht.	Wd.	Mounting Hole Ctr.-to-Ctr.	Fasteners Included	Screw Size	Hole Ctr.-to-Ctr.	Key No.	No. of Keys Included	For Use On		Each
Keyed Alike
Black Powder-Coated Zinc
5/16"	2 15/16"	2 5/8"	1 3/16"	1/4"	2 15/16"	15/16"	2 3/16"	No	M6	2 3/16"	1333	2	Metal, Wood	0000000	000000
Keyed Differently
Black Powder-Coated Zinc
5/16"	2 15/16"	2 5/8"	1 3/16"	1/4"	2 15/16"	15/16"	2 3/16"	No	M6	2 3/16"	__	2	Metal, Wood	0000000	00000