Silver T-Slotted Framing Rails

Filter by

T-Slotted Framing Rail Profile

System of Measurement

Rail Height

Length

Rail Width

Single Rail Profile Style

Rail Construction

Rail Texture

Color

T-Slot Width

T-Slotted Framing Component

Fastener

Rail

Double Rail Profile Style

Center Hole Diameter

Material

Quad Rail Profile Style

Thread Size

Finish

T-Slot Depth

Temper Designation

Center Hole Thread Size

1/4"-20

5/16"-18

3/8"-16

T-Slotted Framing Nut Type

Double

Easy-Slide Spring Tab

Self-Aligning Spring Tab

Self-Aligning Spring-Loaded Ball

Set Screw

Set Screw and Spring-Loaded Ball

Machined Hole Location

REACH

RoHS

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

386 Products

T-Slotted Framing Rails

Use this versatile framing to configure machine guards, enclosures, carts, and workstations. These rails have continuous T-slots for attaching fittings. When choosing how many slots you want on your rail, consider how much flexibility you need for your setup and how finished you'd like your structure to appear. The more slots the rail has, the more design flexibility you will have. Keep in mind, open slots can collect dust and debris. Rails with closed sides give you a finished appearance but are more difficult to reconfigure or add components to later. All of these rails are made of aluminum.

Low-profile rails are half the width of double rails. They’re often used to attach handles, sensors, and other accessories.

Radius, angled, and half-round rails give a finished appearance. They are often used to create finished edges or handles on carts.

Double-, triple-, and quad-profile rails are good for large structural applications, such as beams and posts. Typically, the larger the rail profile, the stronger the rail.

Solid rails are stronger than hollow rails. Hollow rails are lighter and more economical than solid rails.

Grooved rails help you align rails when connecting them. They also camouflage dents and marks better than smooth rails but can collect dust and grime. Smooth rails give a finished look. With no indentations to collect dust, they’re easier to clean than grooved rails. However, dents and marks are easier to see.

Rails with tapped, access, and bore holes come already machined, so they're ready to be used with concealed structural brackets to make 90° connections between rails.

Cut-to-length rails can be ordered in increments of 0.125” or 0.25 cm.

Single Four Slot Rails—Foot

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		1/2 ft.	1 ft.	1 1/2 ft.	2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.
1"	1"	Solid	0.256"	0.323"	000000000	00000	00000	000000	000000	000000	000000	000000	000000	000000	000000
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	000000000	0000	0000	00000	00000	00000	00000	00000	00000	00000	00000
1 1/2"	1 1/2"	Solid	0.32"	0.484"	000000000	0000	00000	00000	00000	00000	00000	00000	00000	00000	00000
Silver Anodized Aluminum—Smooth Rail Texture
1"	1"	Solid	0.256"	0.323"	0000000	00	0000	00	00000	00000	00000	00000	00000	00000	00000
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	0000000	00	0000	00	00000	00000	00000	00000	00000	00000	00000
20mm	20mm	Solid	5mm	6.3mm	00000000	0000	0000	0000	00000	00000	00000	00000	00000	00000	00000
25mm	25mm	Solid	6.5mm	8.1mm	0000000	00	0000	00	00000	00000	00000	00000	00000	00000	00000
30mm	30mm	Hollow	8mm	9mm	0000000	0000	0000	00000	00000	00000	00000	00000	00000	00000	00000
40mm	40mm	Hollow	8mm	12.2mm	0000000	0000	00000	00000	00000	00000	00000	00000	00000	00000	00000
40mm	40mm	Solid	8mm	12.2mm	00000000	0000	00000	00000	00000	00000	00000	00000	00000	00000	000000
45mm	45mm	Hollow	10mm	14.5mm	00000000	0000	00000	00000	00000	00000	00000	00000	00000	00000	00000
60mm	60mm	Hollow	10mm	13.1mm	0000000	00	00000	00	00000	00000	00000	000000	000000	000000	000000

Single Four Slot Rails with Tapped Center Hole—Foot

Hollow Construction

Solid Construction

The rails with tapped holes can also be used to install mounting feet. You can use them with tabbed concealed brackets.

Those machined on one end are best for making tabletops. If you need to shorten the length of the rail, you can cut down the opposite end. Those machined on both ends are good for making boxes and enclosures.

					Center Hole
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Thread Size	Thread Dp.		1 ft.	2 ft.	3 ft.	4 ft.	5 ft.
Silver Anodized Aluminum—Grooved Rail Texture
Hole on One End of Rail
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	3/8"-16	1 1/4"	0000000	000000	000000	000000	000000	000000
Hole on Both Ends of Rail
1"	1"	Solid	0.256"	0.323"	1/4"-20	3/4"	0000000	00000	00000	00000	00000	00000
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	5/16"-18	1"	0000000	00000	00000	00000	00000	00000

Single Four Slot Rails with Access Holes—Foot

Solid Construction

Hollow Construction

The rails with access holes are typically used with rails that have tapped holes. They have a hole already drilled in one or both ends. These access holes create the opening you need to insert and tighten a screw into the end of the second rail to make a corner connection. To move the connection location on the rail, you’ll need to drill a new access hole. You can also use these brackets with tabbed concealed brackets.

					Access Hole
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Dia.	Center to End of Rail		1 ft.	2 ft.	3 ft.	4 ft.	5 ft.
Silver Anodized Aluminum—Grooved Rail Texture
Holes on One End of Rail
1"	1"	Solid	0.256"	0.323"	0.218"	1/2"	0000000	000000	000000	000000	000000	000000
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	0.295"	3/4"	0000000	00000	00000	00000	00000	00000
Holes on Both Ends of Rail
1"	1"	Solid	0.256"	0.323"	0.218"	1/2"	0000000	00000	00000	00000	00000	00000
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	0.295"	3/4"	0000000	00000	00000	00000	00000	00000

Single Four Slot Rails with Bore Hole—Foot

Solid Construction

Hollow Construction

For rails with bore holes, the bracket can be loosened, moved along the rail, and retightened without drilling a new hole like you need to do with rails with access holes. You can use them with anchor concealed brackets. The 1" high rails with bore holes can also be used to make end-to-end rail connections due to the hole location.

					Bore Hole
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Dia.	Dp.	Center to End of Rail		1 ft.	2 ft.	3 ft.	4 ft.	5 ft.
Silver Anodized Aluminum—Grooved Rail Texture
Hole on One End of Rail
1"	1"	Solid	0.256"	0.323"	0.563"	0.42"	0.436"	0000000	000000	000000	000000	000000	000000
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	0.813"	0.66"	0.855"	0000000	00000	00000	00000	00000	00000
Hole on Both Ends of Rail
1"	1"	Solid	0.256"	0.323"	0.563"	0.42"	0.436"	0000000	00000	00000	00000	00000	00000
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	0.813"	0.66"	0.855"	0000000	00000	00000	00000	00000	00000

Single Four Slot Rails—Inch

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		1"	2"	3"	4"	5"	7"	8"	9"	10"	11"
1"	1"	Solid	0.256"	0.323"	000000000	00000	00000	00000	00000	00000	00000	00000	00000	00000	00000
Silver Anodized Aluminum—Smooth Rail Texture
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	0000000	0000	0000	0000	0000	0000	0000	0000	0000	0000	00000

Single Four Slot Rails—Cut-to-Length (per Inch)

Hollow Construction

Solid Construction

Grooved Texture

Smooth Texture

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Choose a Length		Per Inch
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	2" to 240" in 0.125" increments	000000000	00000
Silver Anodized Aluminum—Smooth Rail Texture
1"	1"	Solid	0.256"	0.323"	1" to 240" in 0.125" increments	000000000	000
1 1/2"	1 1/2"	Solid	0.32"	0.484"	1" to 240" in 0.125" increments	000000000	0000
20mm	20mm	Solid	5mm	6.3mm	2" to 240" in 0.125" increments	00000000	000
25mm	25mm	Solid	6.5mm	8.1mm	0.75" to 240" in 0.125" increments	00000000	000
30mm	30mm	Hollow	8mm	9mm	2" to 236" in 0.125" increments	00000000	000
40mm	40mm	Hollow	8mm	12.2mm	2" to 240" in 0.125" increments	00000000	0000
40mm	40mm	Solid	8mm	12.2mm	2" to 240" in 0.125" increments	00000000	0000
45mm	45mm	Hollow	10mm	14.5mm	2" to 236" in 0.125" increments	00000000	0000

Single Four Slot Rails—Cut-to-Length (per cm)

Hollow Construction

Solid Construction

Grooved Texture

Smooth Texture

To order: Please specify length in increments of 0.25 cm within the range listed.

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Choose a Length		Per cm
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	5 cm to 607 cm in 0.25 cm increments	000000000	00000
Silver Anodized Aluminum—Smooth Rail Texture
1"	1"	Solid	0.256"	0.323"	3 cm to 609 cm in 0.25 cm increments	000000000	000
1 1/2"	1 1/2"	Solid	0.32"	0.484"	3 cm to 609 cm in 0.25 cm increments	000000000	000
20mm	20mm	Solid	5mm	6.3mm	5 cm to 607 cm in 0.25 cm increments	000000	000
25mm	25mm	Solid	6.5mm	8.1mm	2 cm to 609 cm in 0.25 cm increments	00000000	000
30mm	30mm	Hollow	8mm	9mm	5 cm to 599 cm in 0.25 cm increments	00000000	000
40mm	40mm	Hollow	8mm	12.2mm	2 cm to 609 cm in 0.25 cm increments	00000000	000
40mm	40mm	Solid	8mm	12.2mm	5 cm to 607 cm in 0.25 cm increments	00000000	000
45mm	45mm	Hollow	10mm	14.5mm	5 cm to 599 cm in 0.25 cm increments	00000000	000

Single Three Slot Rails—Foot

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		1 ft.	2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.
1"	1"	Solid	0.256"	0.323"	000000000	00	000000	000000	000000	000000	000000	000000	000000
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	000000000	00	00000	00000	00000	00000	00000	00000	000000
Silver Anodized Aluminum—Smooth Rail Texture
30mm	30mm	Hollow	8mm	9mm	0000000	00	00000	00	00000	00	00000	00000	00000
40mm	40mm	Solid	8mm	12.2mm	0000000	000000	00000	00	00000	00	00000	00000	00
45mm	45mm	Hollow	10mm	14.5mm	0000000	00	00000	00	00000	00	00000	00000	00000

Single Three Slot Rails—Cut-to-Length (per Inch)

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Choose a Length		Per Inch
1"	1"	Solid	0.256"	0.323"	2" to 240" in 0.125" increments	00000000	00000
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	0.75" to 240" in 0.125" increments	00000000	0000
Silver Anodized Aluminum—Smooth Rail Texture
30mm	30mm	Hollow	8mm	9mm	2" to 240" in 0.125" increments	00000000	000
40mm	40mm	Hollow	8mm	12.2mm	0.75" to 240" in 0.125" increments	00000000	0000
45mm	45mm	Hollow	10mm	14.5mm	2" to 240" in 0.125" increments	00000000	0000

Single Inline Two Slot Rails—Foot

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		1 ft.	2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.
1"	1"	Solid	0.256"	0.323"	00000000	00000	000000	000000	000000	000000	000000	000000	000000
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	00000000	00000	00000	00000	00000	00000	00000	00000	00000
Silver Anodized Aluminum—Smooth Rail Texture
20mm	20mm	Solid	5mm	6.3mm	0000000	00	00000	00	00000	00	00000	00000	00000
30mm	30mm	Hollow	8mm	9mm	0000000	00	00000	00	00000	00	00000	00000	00000
40mm	40mm	Hollow	8mm	12.2mm	0000000	00000	00000	00	00000	00	00000	00000	00
40mm	40mm	Solid	8mm	12.2mm	0000000	00	00000	00	00000	00	00000	00000	000000
45mm	45mm	Hollow	10mm	14.5mm	0000000	00	00000	00	00000	00	00000	00000	00000

Single Inline Two Slot Rails—Cut-to-Length (per Inch)

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Choose a Length		Per Inch
1"	1"	Solid	0.256"	0.323"	1" to 240" in 0.125" increments	000000000	00000
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	1" to 242" in 0.125" increments	000000000	000
Silver Anodized Aluminum—Smooth Rail Texture
20mm	20mm	Solid	5mm	6.3mm	2" to 240" in 0.125" increments	00000000	000
30mm	30mm	Hollow	8mm	9mm	2" to 220" in 0.125" increments	00000000	000
40mm	40mm	Hollow	8mm	12.2mm	0.75" to 240" in 0.125" increments	00000000	0000
40mm	40mm	Solid	8mm	12.2mm	2" to 240" in 0.125" increments	00000000	0000
45mm	45mm	Hollow	10mm	14.5mm	2" to 220" in 0.125" increments	00000000	000

Single Corner Two Slot Rails—Foot

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.
1"	1"	Solid	0.256"	0.323"	00000000	000000	000000	000000	000000	000000	000000	000000
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	00000000	00000	00000	00000	00000	00000	00000	00
Silver Anodized Aluminum—Smooth Rail Texture
20mm	20mm	Solid	5mm	6.3mm	0000000	00000	00	00000	00	00000	00000	00000
30mm	30mm	Hollow	8mm	9mm	0000000	00000	00	00000	00	00000	00000	00000
40mm	40mm	Hollow	8mm	12.2mm	0000000	00000	00	00000	00	00000	00000	00
40mm	40mm	Solid	8mm	12.2mm	0000000	00000	00	00000	00	00000	00000	000000
45mm	45mm	Hollow	10mm	14.5mm	0000000	00000	00	00000	00	00000	00000	00000

Single Corner Two Slot Rails—Cut-to-Length (per Inch)

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Choose a Length		Per Inch
1"	1"	Solid	0.256"	0.323"	1" to 240" in 0.125" increments	000000000	00000
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	1" to 242" in 0.125" increments	000000000	000
Silver Anodized Aluminum—Smooth Rail Texture
20mm	20mm	Solid	5mm	6.3mm	2" to 240" in 0.125" increments	00000000	000
30mm	30mm	Hollow	8mm	9mm	2" to 220" in 0.125" increments	00000000	000
40mm	40mm	Hollow	8mm	12.2mm	0.75" to 240" in 0.125" increments	00000000	0000
40mm	40mm	Solid	8mm	12.2mm	2" to 240" in 0.125" increments	00000000	0000
45mm	45mm	Hollow	10mm	14.5mm	2" to 220" in 0.125" increments	00000000	000

Single Angled Two Slot Rails—Foot

Hollow Construction

Grooved Texture

Smooth Texture

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Depth	Angle		2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	45°	0000000	000000	000000	000000	000000	000000	000000	000000
Silver Anodized Aluminum—Smooth Rail Texture
40mm	40mm	Hollow	8mm	12.2mm	45°	0000000	00000	00	00000	00	00000	00000	00000

Single Angled Two Slot Rails—Cut-to-Length (per Inch)

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Angle	Choose a Length		Per Inch
1"	1"	Solid	0.256"	0.323"	45°	0.75" to 240" in 0.125" increments	00000000	00000
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	45°	0.75" to 240" in 0.125" increments	00000000	0000
Silver Anodized Aluminum—Smooth Rail Texture
40mm	40mm	Hollow	8mm	12.2mm	45°	2" to 145" in 0.125" increments	00000000	000

Single Radius Two Slot Rails—Foot

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Angle	Radius		1 ft.	2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.
1"	1"	Solid	0.256"	0.323"	45°	3/4"	0000000	00000	000000	000000	000000	000000	000000	000000	000000
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	45°	1 1/8"	0000000	00000	00000	00000	00000	00000	00000	00000	00000
Silver Anodized Aluminum—Smooth Rail Texture
40mm	40mm	Hollow	8mm	12.2mm	30°	40mm	0000000	00	00000	00	00000	00	00000	00000	00000

Single Radius Two Slot Rails—Cut-to-Length (per Inch)

Solid Construction

Hollow Construction

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Angle	Radius	Choose a Length		Per Inch
1"	1"	Solid	0.256"	0.323"	45°	3/4"	2" to 240" in 0.125" increments	00000000	00000
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	45°	3/4"	2" to 240" in 0.125" increments	00000000	000
40mm	40mm	Hollow	8mm	12.2mm	30°	40mm	2" to 240" in 0.125" increments	00000000	000

Single One Slot Rails—Foot

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		1 ft.	2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.
1"	1"	Solid	0.256"	0.323"	0000000	00000	000000	000000	000000	000000	000000	000000	000000
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	000000	00000	00000	00000	00000	00000	00000	00000	00000
Silver Anodized Aluminum—Smooth Rail Texture
30mm	30mm	Hollow	8mm	9mm	0000000	00	00000	00	00000	00	00000	00000	00000
45mm	45mm	Hollow	10mm	14.5mm	0000000	00	00000	00	00000	00	00000	00000	00000

Single One Slot Rails—Cut-to-Length (per Inch)

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Choose a Length		Per Inch
1"	1"	Solid	0.256"	0.323"	2" to 240" in 0.125" increments	00000000	00000
Silver Anodized Aluminum—Smooth Rail Texture
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	2" to 240" in 0.125" increments	00000000	0000
30mm	30mm	Hollow	8mm	9mm	2" to 240" in 0.125" increments	00000000	000
45mm	45mm	Hollow	10mm	14.5mm	2" to 240" in 0.125" increments	00000000	0000

Single Low Profile One Slot Rails—Foot

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		1 ft.	2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.
1"	1/2"	Solid	0.256"	0.323"	00000000	00000	000000	000000	000000	000000	000000	000000	000000
Silver Anodized Aluminum—Smooth Rail Texture
1 1/2"	3/4"	Hollow	0.32"	0.484"	000000000	00000	00000	00000	00000	00000	00000	00000	00000
25mm	12.5mm	Solid	6.5mm	8.1mm	0000000	0000	0000	0000	00000	00000	00000	00000	00000
40mm	20mm	Hollow	8mm	12.2mm	0000000	0000	00000	00000	00000	00000	00000	00000	00000

Single Low Profile One Slot Rails—Cut-to-Length (per Inch)

Hollow Construction

Solid Construction

Grooved Texture

Smooth Texture

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Choose a Length		Per Inch
1 1/2"	3/4"	Solid	0.32"	0.484"	0.75" to 145" in 0.125" increments	00000000	00000
Silver Anodized Aluminum—Smooth Rail Texture
1"	1/2"	Solid	0.256"	0.323"	2" to 145" in 0.125" increments	00000000	000
1 1/2"	3/4"	Solid	0.32"	0.484"	2" to 145" in 0.125" increments	00000000	000
20mm	10mm	Solid	5mm	6.3mm	0.75" to 145" in 0.125" increments	00000000	000
25mm	12.5mm	Solid	6.5mm	8.1mm	0.75" to 145" in 0.125" increments	00000000	000

Single Angled One Slot Rails—Foot

Hollow Construction

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht., mm	Rail Wd., mm	Rail Construction	T-Slot Wd., mm	T-Slot Dp., mm	Angle		2 ft.	4 ft.	6 ft.	8 ft.	10 ft.
40	40	Hollow	8	12.2	45°	0000000	000000	000000	000000	000000	000000

Single Angled One Slot Rails—Cut-to-Length (per Inch)

Hollow Construction

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht., mm	Rail Wd., mm	Rail Construction	T-Slot Wd., mm	T-Slot Dp., mm	Angle	Choose a Length		Per Inch
40	40	Hollow	8	12.2	45°	2" to 145" in 0.125" increments	00000000	00000

Single Half Round One Slot Rails—Foot

Hollow Construction

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Radius		2 ft.	4 ft.	6 ft.	8 ft.	10 ft.
45mm	45mm	Hollow	10mm	12.5mm	23mm	0000000	000000	000000	000000	0000000	0000000

Single Half Round One Slot Rails—Cut-to-Length (per Inch)

Hollow Construction

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Radius	Choose a Length		Per Inch
45mm	45mm	Hollow	10mm	12.5mm	23mm	2" to 240" in 0.125" increments	00000000	00000

Double Six Slot Rails—Foot

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		1/2 ft.	1 ft.	1 1/2 ft.	2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.
2"	1"	Solid	0.256"	0.323"	000000000	00000	000000	000000	000000	000000	000000	000000	000000	000000	000000
3"	1 1/2"	Hollow	0.32"	0.484"	000000000	00	00000	00	00000	00000	00000	00000	00000	000000	000000
3"	1 1/2"	Solid	0.32"	0.484"	000000000	00000	00000	00000	00000	00000	00000	00000	000000	000000	000000
Silver Anodized Aluminum—Smooth Rail Texture
2"	1"	Solid	0.256"	0.323"	0000000	00	00000	00	00000	00000	00000	00000	00000	00000	00000
3"	1 1/2"	Hollow	0.32"	0.484"	0000000	00000	00000	00000	00000	00000	00000	00000	00000	000000	000000
40mm	20mm	Solid	5mm	6.3mm	00000000	0000	0000	00000	00000	00000	00000	00000	00000	00000	00000
50mm	25mm	Solid	6.5mm	8.1mm	0000000	00	0000	00	00000	00000	00000	00000	00000	00000	00000
60mm	30mm	Hollow	8mm	9mm	0000000	0000	00000	00000	00000	00000	00000	00000	00000	00000	00000
80mm	40mm	Hollow	8mm	12.2mm	0000000	00000	00000	00000	00000	00000	00000	00000	00000	000000	000000
80mm	40mm	Solid	8mm	12.2mm	00000000	00000	00000	00000	00000	00000	00000	000000	000000	000000	000000
90mm	45mm	Hollow	10mm	14.5mm	00000000	00000	00000	00000	00000	00000	00000	00000	000000	000000	000000

Double Six Slot Rails—Cut-to-Length (per Inch)

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Choose a Length		Per Inch
2"	1"	Solid	0.256"	0.323"	1" to 240" in 0.125" increments	000000000	00000
3"	1 1/2"	Hollow	0.32"	0.484"	2" to 240" in 0.125" increments	000000000	0000
3"	1 1/2"	Solid	0.32"	0.484"	1" to 240" in 0.125" increments	000000000	0000
Silver Anodized Aluminum—Smooth Rail Texture
40mm	20mm	Solid	5mm	6.3mm	2" to 240" in 0.125" increments	00000000	000
50mm	25mm	Solid	6.5mm	8.1mm	0.75" to 240" in 0.125" increments	00000000	000
60mm	30mm	Hollow	8mm	9mm	2" to 220" in 0.125" increments	00000000	0000
80mm	40mm	Hollow	8mm	12.2mm	0.75" to 240" in 0.125" increments	00000000	0000
80mm	40mm	Solid	8mm	12.2mm	2" to 240" in 0.125" increments	00000000	0000
90mm	45mm	Hollow	10mm	14.5mm	2" to 220" in 0.125" increments	00000000	0000

Double Six Slot Rails—Cut-to-Length (per cm)

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

To order: Please specify length in increments of 0.25 cm within the range listed.

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Choose a Length		Per cm
2"	1"	Solid	0.256"	0.323"	3 cm to 609 cm in 0.25 cm increments	000000000	00000
3"	1 1/2"	Hollow	0.32"	0.484"	5 cm to 607 cm in 0.25 cm increments	000000000	000
3"	1 1/2"	Solid	0.32"	0.484"	3 cm to 609 cm in 0.25 cm increments	000000000	000
Silver Anodized Aluminum—Smooth Rail Texture
40mm	20mm	Solid	5mm	6.3mm	2 cm to 609 cm in 0.25 cm increments	00000000	000
50mm	25mm	Solid	6.5mm	8.1mm	2 cm to 609 cm in 0.25 cm increments	00000000	000
60mm	30mm	Hollow	8mm	9mm	2 cm to 609 cm in 0.25 cm increments	00000000	000
80mm	40mm	Hollow	8mm	12.2mm	2 cm to 609 cm in 0.25 cm increments	00000000	000
80mm	40mm	Solid	8mm	12.2mm	2 cm to 609 cm in 0.25 cm increments	00000000	000
90mm	45mm	Hollow	10mm	14.5mm	2 cm to 609 cm in 0.25 cm increments	00000000	000

Double Corner Four Slot Rails—Foot

Hollow Construction

Solid Construction

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		1 ft.	2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.
80mm	40mm	Hollow	8mm	12.2mm	0000000	000000	000000	000000	000000	000000	0000000	0000000	0000000
80mm	40mm	Solid	8mm	12.2mm	0000000	00	00000	00	00000	00	000000	000000	000000

Double Corner Four Slot Rails—Cut-to-Length (per Inch)

Hollow Construction

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Choose a Length		Per Inch
80mm	40mm	Hollow	8mm	12.2mm	2" to 240" in 0.125" increments	00000000	00000

Double Corner Three Slot Rails—Foot

Hollow Construction

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		2 ft.	4 ft.	6 ft.	8 ft.	10 ft.
80mm	40mm	Hollow	8mm	12.2mm	0000000	000000	000000	0000000	0000000	0000000

Double Corner Three Slot Rails—Cut-to-Length (per Inch)

Hollow Construction

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Choose a Length		Per Inch
80mm	40mm	Hollow	8mm	12.2mm	2" to 240" in 0.125" increments	00000000	00000

Double Corner Two Slot Rails—Foot

Hollow Construction

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		2 ft.	4 ft.	6 ft.	8 ft.	10 ft.
80mm	40mm	Hollow	8mm	12.2mm	0000000	000000	000000	0000000	0000000	0000000

Double Corner Two Slot Rails—Cut-to-Length (per Inch)

Hollow Construction

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Choose a Length		Per Inch
80mm	40mm	Hollow	8mm	12.2mm	2" to 240" in 0.125" increments	00000000	00000

Double Inline Two Slot Rails—Foot

Hollow Construction

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		2 ft.	4 ft.	6 ft.	8 ft.	10 ft.
80mm	40mm	Hollow	8mm	12.2mm	0000000	000000	000000	0000000	0000000	0000000

Double Inline Two Slot Rails—Cut-to-Length (per Inch)

Hollow Construction

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Choose a Length		Per Inch
80mm	40mm	Hollow	8mm	12.2mm	2" to 240" in 0.125" increments	00000000	00000

Double Low Profile Two Slot Rails—Foot

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		1 ft.	2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.
2"	1/2"	Solid	0.256"	0.323"	0000000	00000	000000	000000	000000	000000	000000	000000	000000
Silver Anodized Aluminum—Smooth Rail Texture
3"	3/4"	Hollow	0.32"	0.484"	0000000	00000	00000	00000	00000	00000	00000	000000	000000
80mm	20mm	Hollow	8mm	12.2mm	0000000	00	00000	00	00000	00	00000	00000	00000

Double Low Profile Two Slot Rails—Cut-to-Length (per Inch)

Solid Construction

Hollow Construction

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Choose a Length		Per Inch
2"	1/2"	Solid	0.256"	0.323"	2" to 145" in 0.125" increments	00000000	00000
3"	3/4"	Solid	0.32"	0.484"	2" to 145" in 0.125" increments	00000000	0000

Triple Rails—Foot

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		1 ft.	2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.
3"	1"	Solid	0.256"	0.323"	000000000	000000	000000	000000	000000	000000	000000	0000000	0000000
4 1/2"	1 1/2"	Hollow	0.32"	0.484"	0000000	00000	00000	00000	000000	000000	000000	000000	000000
4 1/2"	1 1/2"	Solid	0.32"	0.484"	000000000	00000	00000	000000	000000	000000	000000	000000	000000
Silver Anodized Aluminum—Smooth Rail Texture
75mm	25mm	Solid	6.5mm	8.1mm	0000000	00000	00000	00000	00000	00000	00000	00000	000000
120mm	40mm	Hollow	8mm	12.2mm	0000000	00000	00000	00000	000000	000000	000000	000000	000000
120mm	40mm	Solid	8mm	12.2mm	000000	00000	00000	00000	000000	000000	000000	000000	000000

Triple Rails—Cut-to-Length (per Inch)

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Choose a Length		Per Inch
3"	1"	Solid	0.256"	0.323"	2" to 240" in 0.125" increments	00000000	00000
4 1/2"	1 1/2"	Hollow	0.32"	0.484"	0.75" to 240" in 0.125" increments	00000000	0000
4 1/2"	1 1/2"	Solid	0.32"	0.484"	0.75" to 240" in 0.125" increments	00000000	0000
Silver Anodized Aluminum—Smooth Rail Texture
75mm	25mm	Solid	6.5mm	8.1mm	0.75" to 240" in 0.125" increments	00000000	0000
120mm	40mm	Solid	8mm	12.2mm	0.75" to 240" in 0.125" increments	00000000	0000

Quad Rails—Foot

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		1 ft.	2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.
2"	2"	Solid	0.256"	0.323"	000000000	000000	000000	000000	000000	000000	000000	0000000	0000000
3"	3"	Hollow	0.32"	0.484"	000000000	00000	00000	00000	000000	000000	000000	000000	000000
3"	3"	Solid	0.32"	0.484"	000000000	00000	00000	000000	000000	000000	000000	000000	000000
Silver Anodized Aluminum—Smooth Rail Texture
50mm	50mm	Solid	6.5mm	8.1mm	0000000	0000	00000	00000	00000	00000	00000	00000	00000
60mm	60mm	Hollow	8mm	9mm	0000000	00000	00000	00000	00000	00000	00000	000000	000000
80mm	80mm	Solid	8mm	12.2mm	0000000	00000	00000	000000	000000	000000	000000	000000	000000
90mm	90mm	Hollow	10mm	12.5mm	0000000	00000	00000	00000	000000	000000	000000	000000	000000

Quad Rails—Cut-to-Length (per Inch)

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Choose a Length		Per Inch
2"	2"	Solid	0.256"	0.323"	1" to 240" in 0.125" increments	000000000	00000
3"	3"	Hollow	0.32"	0.484"	2" to 240" in 0.125" increments	000000000	0000
3"	3"	Solid	0.32"	0.484"	1" to 240" in 0.125" increments	000000000	0000
Silver Anodized Aluminum—Smooth Rail Texture
50mm	50mm	Solid	6.5mm	8.1mm	0.75" to 240" in 0.125" increments	00000000	0000
60mm	60mm	Hollow	8mm	9mm	2" to 236" in 0.125" increments	00000000	0000
80mm	80mm	Hollow	8mm	12.2mm	0.75" to 240" in 0.125" increments	00000000	0000
80mm	80mm	Solid	8mm	12.2mm	2" to 240" in 0.125" increments	00000000	0000
90mm	90mm	Hollow	10mm	12.5mm	2" to 220" in 0.125" increments	00000000	0000

Double Quad Rails—Foot

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		1 ft.	2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.
4"	2"	Solid	0.256"	0.323"	0000000	000000	000000	000000	000000	0000000	0000000	0000000	0000000
6"	3"	Hollow	0.32"	0.484"	0000000	00000	000000	000000	000000	000000	000000	000000	000000
6"	3"	Solid	0.32"	0.484"	0000000	00000	000000	000000	000000	000000	000000	000000	000000
Silver Anodized Aluminum—Smooth Rail Texture
160mm	80mm	Solid	8mm	12.2mm	0000000	00	000000	00	000000	00	000000	000000	000000

Double Quad Rails—Cut-to-Length (per Inch)

Hollow Construction

Solid Construction

Grooved Texture

Smooth Texture

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Choose a Length		Per Inch
6"	3"	Hollow	0.32"	0.484"	0.75" to 145" in 0.125" increments	00000000	00000
6"	3"	Solid	0.32"	0.484"	2" to 145" in 0.125" increments	00000000	0000
Silver Anodized Aluminum—Smooth Rail Texture
4"	2"	Solid	0.256"	0.323"	2" to 240" in 0.125" increments	00000000	0000
160mm	80mm	Solid	8mm	12.2mm	2" to 145" in 0.125" increments	00000000	0000

T-Slotted Framing Fasteners

Screw and nut sets or nuts secure brackets and other accessories to rails.

End-feed fasteners slide into the end of the rail to attach components. They form stronger connections than drop-in fasteners because more surface area touches the rail.

Drop-in fasteners fit directly into the T-slot to attach components—no need to disassemble your existing structure. However, they form less secure connections than end-feed fasteners because less surface area touches the rail.

End-Feed Nuts

Single Nut with Center Hole

Single Nut with Offset Hole

Self-Aligning Nut

Double Nut

Triple Nut

Self-Aligning Spring-Tab Nut

Easy-Slide Spring-Tab Nut

Self-Aligning Nut

Self-Aligning Spring-Tab Nut

Self-aligning nuts have a ridge that keeps them centered in the T-slot.

Use double and triple nuts to install brackets with multiple holes. They eliminate the need for a single nut and screw for each hole.

Spring-tab nuts have a flexible tab on the side that holds them in place on vertical rails. It also compensates for different slot depths.

Easy-slide spring-tab fasteners have a flexible tab that’s parallel to their body, so it won’t catch on access holes as you slide them along a rail. The tab keeps the nut from sliding down vertical rails.

Offset nuts have a mounting hole close to one end, so you can install them next to corners and rail ends.

Stainless steel is stronger than plastic and more corrosion resistant than steel. It withstands salt water and chemicals.

For Rail Ht.
Single	Double and Quad	Triple	Mounting Hole Location	Thread Size	Thickness	Color	Material	Pkg. Qty.		Pkg.
Single Nut
1", 25mm	2", 50mm	3"	Center	1/4"-20	0.124"	Silver	Steel	25	000000000	00000
1", 25mm	2", 50mm	3"	Center	1/4"-20	0.124"	Silver	304 Stainless Steel	10	0000000	0000
1", 25mm	2", 50mm	3"	Offset	10-32	0.150"	Silver	304 Stainless Steel	10	0000000	0000
1", 25mm	2", 50mm	3"	Offset	M5	0.167"	Silver	Zinc-Plated Steel	10	0000000	0000
1", 25mm	2", 50mm	3"	Offset	M6	0.167"	Silver	Zinc-Plated Steel	10	0000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Center	5/16"-18	0.142"	Silver	Zinc-Plated Steel	10	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	1/4"-20	0.175"	Silver	304 Stainless Steel	10	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	M6	0.180"	Silver	Zinc-Plated Steel	10	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	5/16"-18	0.221"	Silver	Steel	25	000000000	00000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	5/16"-18	0.222"	Silver	304 Stainless Steel	10	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	M6	0.248"	Silver	Zinc-Plated Steel	10	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	M8	0.248"	Silver	Zinc-Plated Steel	10	0000000	0000
20mm	40mm	__	Center	M5	0.126"	Silver	Zinc-Plated Steel	10	0000000	0000
Self-Aligning Nut
1"	2"	3"	Center	10-32	0.217"	Silver	Zinc-Plated Steel	4	0000000	0000
1"	2"	3"	Center	M5	0.180"	Silver	Zinc-Plated Steel	4	00000000	0000
1", 25mm	2", 50mm	3"	Center	M4	0.177"	Silver	Zinc-Plated Steel	4	0000000	0000
1", 25mm	2", 50mm	3"	Center	M6	0.177"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Center	5/16"-18	0.200"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Center	M4	0.236"	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Center	M5	0.236"	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Center	M8	0.236"	Silver	Zinc-Plated Steel	4	00000000	0000
45mm	90mm	__	Center	M5	0.315"	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	M6	0.315"	Silver	Zinc-Plated Steel	4	00000000	0000
45mm	90mm	__	Center	M8	0.315"	Silver	Zinc-Plated Steel	4	00000000	0000
Double Nut
1"	2"	3"	Offset	M6	0.130"	Silver	Zinc-Plated Steel	10	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	M8	0.130"	Silver	Zinc-Plated Steel	10	0000000	00000
25mm	50mm	__	Offset	M6	0.145"	Silver	Zinc-Plated Steel	10	0000000	0000
Triple Nut
1"	2"	3"	Center, Offset	M6	0.144"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center, Offset	M8	0.222"	Silver	Zinc-Plated Steel	4	0000000	0000
Self-Aligning Spring-Tab Nut
1"	2"	3"	Center	1/4"-20	0.217"	Silver	Zinc-Plated Steel	4	0000000	0000
Easy-Slide Spring-Tab Nut
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	M4	0.236"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	M5	0.236"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	M6	0.236"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	M8	0.236"	Silver	Zinc-Plated Steel	4	0000000	0000

End-Feed Screw and Nut Sets

Single Nut with
Offset Hole and
Button Head

Single Nut with
Offset Hole and
Flanged Button Head

Self-Aligning Nut with Button Head

Self-Aligning
Spring-Tab Nut
with Button Head

Self-Aligning Nut

Self-Aligning Spring-Tab Nut

Button head screws are more compact, so they're better for tight spaces than other screws for T-slotted framing.

Flanged button head screws have a wider head than standard button head fasteners, so you don’t need a washer for wide mounting holes.

Self-aligning nuts have a ridge that keeps them centered in the T-slot.

Spring-tab nuts have a flexible tab on the side that holds them in place on vertical rails. It also compensates for different slot depths.

Offset nuts have a mounting hole close to one end, so you can install them next to corners and rail ends.

Stainless steel is stronger than plastic and more corrosion resistant than steel. It withstands salt water and chemicals.

For Rail Ht.			Mounting			Screw		Nut
Single	Double and Quad	Triple	Hole Location	Fastener Thread Size	Fastener Thread Lg.	Color	Material	Color	Material	Pkg. Qty.		Pkg.
Single Nut with Button Head
1 1/2"	3"	4 1/2"	Offset	5/16"-18	5/8"	Silver	302 Stainless Steel	Silver	302 Stainless Steel	4	000000000	00000
30mm	60mm	__	Offset	M6	16mm	Silver	304 Stainless Steel	Silver	304 Stainless Steel	4	00000000	0000
Single Nut with Flanged Button Head
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	M8	16mm	Silver	304 Stainless Steel	Silver	304 Stainless Steel	4	00000000	0000
20mm	40mm	__	Offset	M5	8mm	Silver	304 Stainless Steel	Silver	304 Stainless Steel	4	00000000	0000
45mm	90mm	__	Offset	M8	16mm	Silver	304 Stainless Steel	Silver	304 Stainless Steel	4	00000000	0000
Self-Aligning Nut with Button Head
1"	2"	3"	Center	M5	10mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Center	5/16"-18	11/16"	Black	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Center	M6	16mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Center	M8	16mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	M8	20mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
Self-Aligning Spring-Tab Nut with Button Head
1"	2"	3"	Center	1/4"-20	1/2"	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	000000000	0000

Drop-In Nuts

Self-Aligning Nut

Spring-Tab Nut

Self-Aligning Spring-Tab Nut

Set Screw Nut

Set Screw and Spring-Loaded Ball Nut

Spring-Loaded Ball Nut

Self-Aligning Spring-Loaded Ball Nut

Hammer Nut

Self-Aligning Nut

Spring-Tab Nut

Self-Aligning Spring-Tab Nut

Set Screw Nut

Set Screw and Spring-Loaded Ball Nut

Spring-Loaded Ball Nut

Self-Aligning Spring-Loaded Ball Nut

Hammer Nut

Self-aligning nuts have a ridge that keeps them centered in the T-slot.

Spring-tab nuts have a flexible tab on the side that holds them in place on vertical rails. It also compensates for different slot depths.

Set screw nuts can be tightened in place, so they won’t budge, even on vertical rails, until you unscrew them.

Spring-loaded ball nuts hold themselves in place, so they won’t slide down vertical rails. The ball glides over holes, so they’re easy to reposition.

Static-control nuts have serrations that pierce the anodized coating of the rail, which dissipates static charges to protect sensitive electronic equipment.

Hammer nuts drop in to the slot and turn into place when the screw is tightened.

Offset nuts have a mounting hole close to one end, so you can install them next to corners and rail ends.

Stainless steel is stronger than plastic and more corrosion resistant than steel. It withstands salt water and chemicals.

For Rail Ht.
Single	Double and Quad	Triple	Mounting Hole Location	Thread Size	Thickness	Color	Material	Pkg. Qty.		Pkg.
Self-Aligning Nut
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Center	5/16"-18	0.189"	Silver	Zinc-Plated Steel	4	0000000	00000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Center	M4	0.189"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Center	M5	0.189"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Center	M6	0.181"	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Center	M8	0.189"	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	10-32	0.205"	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	1/4"-20	0.205"	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	5/16"-18	0.205"	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	M4	0.205"	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	M5	0.205"	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	M6	0.205"	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	M8	0.205"	Silver	Zinc-Plated Steel	4	0000000	0000
Spring-Tab Nut
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	M4	0.236"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	M5	0.236"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	M6	0.236"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	M8	0.236"	Silver	Zinc-Plated Steel	4	0000000	0000
Self-Aligning Spring-Tab Nut
1"	2"	3"	Center	1/4"-20	0.200"	Silver	Zinc-Plated Steel	4	00000000	0000
1"	2"	3"	Center	M6	0.200"	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm, 90mm	Center	M4	0.181"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm, 90mm	Center	M5	0.181"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm, 90mm	Center	M6	0.181"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm, 90mm	Center	M8	0.181"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	1/4"-20	0.283"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	5/16"-18	0.283"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	M4	0.283"	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	M5	0.283"	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	M6	0.283"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	M8	0.283"	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	10-32	0.205"	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	1/4"-20	0.205"	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	5/16"-18	0.205"	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	M4	0.205"	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	M5	0.205"	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	M6	0.236"	Silver	Zinc-Plated Steel	4	00000000	0000
45mm	90mm	__	Center	M8	0.205"	Silver	Zinc-Plated Steel	4	0000000	0000
Set Screw Nut
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	1/4"-20	0.280"	Silver	Zinc-Plated Steel	4	0000000	00000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	5/16"-18	0.280"	Silver	Zinc-Plated Steel	4	0000000	00000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	M6	0.280"	Silver	Zinc-Plated Steel	4	0000000	00000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	M8	0.280"	Silver	Zinc-Plated Steel	4	0000000	00000
Set Screw and Spring-Loaded Ball Nut—Static Control
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	M5	0.295"	Silver	Zinc-Plated Steel	4	0000000	00000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	M6	0.295"	Silver	Zinc-Plated Steel	4	0000000	00000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	M8	0.295"	Silver	Zinc-Plated Steel	4	0000000	00000
Spring-Loaded Ball Nut
1"	2"	3"	Offset	1/4"-20	0.197"	Silver	Zinc-Plated Steel	4	00000000	0000
Self-Aligning Spring-Loaded Ball Nut
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	10-32	0.283"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	1/4"-20	0.283"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	5/16"-18	0.283"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	M4	0.283"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	M5	0.283"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	M5	0.283"	Silver	304 Stainless Steel	4	0000000	00000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	M6	0.283"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	M6	0.283"	Silver	304 Stainless Steel	4	0000000	00000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	M8	0.283"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	M8	0.283"	Silver	304 Stainless Steel	4	0000000	00000
20mm	40mm	__	Offset	M3	0.181"	Silver	Zinc-Plated Steel	4	0000000	0000
20mm	40mm	__	Offset	M4	0.181"	Silver	Zinc-Plated Steel	4	0000000	0000
20mm	40mm	__	Offset	M5	0.181"	Silver	Zinc-Plated Steel	4	0000000	0000
Hammer Nut—Static Control
1", 25mm	2", 50mm	3"	Center	M4	0.165"	Silver	Zinc-Plated Steel	4	00000000	0000
1", 25mm	2", 50mm	3"	Center	M4	0.165"	Silver	304 Stainless Steel	4	0000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Center	10-32	0.236"	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Center	1/4"-20	0.236"	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Center	1/4"-20	0.236"	Silver	304 Stainless Steel	4	00000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Center	M4	0.236"	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 30mm, 40mm	3", 60mm, 80mm	4 1/2", 120mm	Center	M5	0.236"	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	10-32	0.242"	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	1/4"-20	0.295"	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	M4	0.295"	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	M5	0.295"	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	M6	0.295"	Silver	Zinc-Plated Steel	4	00000000	0000
30mm	60mm	__	Center	M6	0.236"	Silver	Zinc-Plated Steel	4	0000000	0000
30mm	60mm	__	Center	M6	0.236"	Silver	304 Stainless Steel	4	0000000	00000
45mm	90mm	__	Center	10-32	0.346"	Silver	Zinc-Plated Steel	4	00000000	0000
45mm	90mm	__	Center	1/4"-20	0.346"	Silver	Zinc-Plated Steel	4	00000000	0000
45mm	90mm	__	Center	1/4"-20	0.346"	Silver	304 Stainless Steel	4	00000000	00000
45mm	90mm	__	Center	5/16"-18	0.346"	Silver	Zinc-Plated Steel	4	00000000	0000
45mm	90mm	__	Center	5/16"-18	0.346"	Silver	304 Stainless Steel	4	00000000	00000
45mm	90mm	__	Center	M4	0.346"	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	M5	0.346"	Silver	Zinc-Plated Steel	4	00000000	0000
45mm	90mm	__	Center	M6	0.343"	Silver	Zinc-Plated Steel	4	00000000	0000
45mm	90mm	__	Center	M6	0.343"	Silver	304 Stainless Steel	4	00000000	0000
45mm	90mm	__	Center	M8	0.327"	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	M8	0.343"	Silver	304 Stainless Steel	4	00000000	00000

Drop-In Screw and Nut Sets

Spring Nut
with Button
Head

Self-Aligning Spring-Tab Nut with Button Head

Set Screw and Spring-Loaded Ball Nut with Button Head

Spring-Loaded Ball Nut with Button Head

Spring-Loaded Ball
Nut with Flanged
Button Head

Self-Aligning Spring-Loaded Ball Nut with Button Head

Push-In Nut

Hammer
Nut with
Button Head

Hammer Nut
with Flanged
Button Head

Hammer Nut
with Socket
Head

Hammer Nut with Stud

Self-Aligning Spring-Tab Nut

Set Screw and Spring-Loaded Ball Nut

Spring-Loaded Ball Nut

Self-Aligning Spring-Loaded Ball Nut

Hammer Nut

Hammer Nut with Stud

Spring nuts hold themselves in place, so they won't slide down vertical rails.

Self-aligning nuts have a ridge that keeps them centered in the T-slot.

Spring-tab nuts have a flexible tab on the side that holds them in place on vertical rails. It also compensates for different slot depths.

Spring-loaded ball nuts hold themselves in place, so they won’t slide down vertical rails. The ball glides over holes, so they’re easy to reposition.

Button head screws are more compact, so they're better for tight spaces than other screws for T-slotted framing.

Flanged button head screws have a wider head than standard button head fasteners, so you don’t need a washer for wide mounting holes.

Socket head screws have a deeper drive than other head styles, so they withstand more torque for a tighter hold.

Set screw nuts can be tightened in place, so they won’t budge, even on vertical rails, until you unscrew them.

Push-in nuts clip into the rail and expand when you tighten the screw. Use them to install lightweight objects such as document holders.

Hammer nuts drop in to the slot and turn into place when the screw is tightened.

Nuts with a stud can be tightened in place with a socket wrench. When the line on the end of the stud is perpendicular to the rail, the nut is properly in place.

Static-control nuts have serrations that pierce the anodized coating of the rail, which dissipates static charges to protect sensitive electronic equipment.

Offset nuts have a mounting hole close to one end, so you can install them next to corners and rail ends.

Stainless steel is stronger than plastic and more corrosion resistant than steel. It withstands salt water and chemicals.

For Rail Ht.			Mounting				Screw		Nut
Single	Double and Quad	Triple	Hole Location	For Screw Size	Fastener Thread Size	Fastener Thread Lg.	Color	Material	Color	Material	Pkg. Qty.		Pkg.
Spring Nut with Button Head
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	__	M6	16mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	00000
45mm	90mm	__	Center	__	M8	20mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	0000
Self-Aligning Spring-Tab Nut with Button Head
1"	2"	3"	Center	__	1/4"-20	1/2"	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1"	2"	3"	Center	__	1/4"-20	1/2"	Black	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	__	5/16"-18	11/16"	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	000000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	__	M4	10mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	__	M6	12mm	Black	Painted Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	__	M6	16mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	__	M8	12mm	Black	Painted Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	__	M8	16mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
30mm	60mm	__	Center	__	M6	12mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
45mm	90mm	__	Center	__	M8	20mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
Set Screw and Spring-Loaded Ball Nut with Button Head—Static Control
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	M5	12mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	00000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	M5	14mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	00000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	M6	12mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	00000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	M6	14mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	00000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	M8	12mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	00000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	M8	14mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	00000
Spring-Loaded Ball Nut with Button Head
1"	2"	3"	Offset	__	1/4"-20	9/16"	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	000000000	0000
20mm	40mm	__	Offset	__	M5	8mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
Spring-Loaded Ball Nut with Flanged Button Head
1", 25mm	2", 50mm	3"	Offset	__	1/4"-20	1/2"	Black	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
Self-Aligning Spring-Loaded Ball Nut with Button Head
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	10-32	1/2"	Black	Painted Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	10-32	5/8"	Black	Painted Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	1/4"-20	1/2"	Black	Painted Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	1/4"-20	5/8"	Black	Painted Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	5/16"-18	1/2"	Black	Painted Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	5/16"-18	5/8"	Black	Painted Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	5/16"-18	11/16"	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	000000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	M5	8mm	Silver	304 Stainless Steel	Silver	304 Stainless Steel	4	00000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	M5	8mm	Black	Painted Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	M6	12mm	Black	Painted Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	M6	16mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	M6	16mm	Silver	304 Stainless Steel	Silver	304 Stainless Steel	4	00000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	M8	12mm	Black	Painted Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	M8	16mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Offset	__	M8	16mm	Silver	304 Stainless Steel	Silver	304 Stainless Steel	4	00000000	0000
Push-In Nut
1 1/2"	3"	4 1/2"	Center	No. 12	__	5/8", 3/4", 1"	Silver	Steel	White	Plastic	12	00000000	0000
40mm	80mm	120mm	Center	No. 12	__	5/8", 3/4", 1"	Silver	Steel	White	Plastic	12	00000000	0000
Hammer Nut with Button Head
1"	2"	3"	Center	__	10-32	3/8"	Black	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1"	2"	3"	Center	__	M4	10mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
1", 25mm	2", 50mm	3"	Center	__	M4	8mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	__	10-32	1/2"	Black	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	__	1/4"-20	1/2"	Black	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	__	1/4"-20	9/16"	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	__	1/4"-20	5/8"	Black	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	__	M6	16mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
30mm	60mm	__	Center	__	M6	12mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
45mm	90mm	__	Center	__	1/4"-20	5/8"	Black	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	__	M4	12mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	__	M8	20mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
45mm	90mm	__	Center	__	M8	20mm	Silver	304 Stainless Steel	Silver	304 Stainless Steel	4	00000000	00000
Hammer Nut with Flanged Button Head
1", 25mm	2", 50mm	3"	Center	__	M4	10mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	__	1/4"-20	1/2"	Black	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	Center	__	1/4"-20	1/2"	Black	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	0000
Hammer Nut with Socket Head
1"	2"	3"	Center	__	10-32	5/8"	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	__	1/4"-20	5/8"	Black	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	Center	__	M6	16mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
30mm	60mm	__	Center	__	M6	12mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
45mm	90mm	__	Center	__	M8	20mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
Hammer Nut with Stud—Static Control
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	__	__	5/16"-18	31/32"	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	000000000	0000
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	__	__	M8	22mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	00000000	0000
30mm	60mm	__	__	__	M6	22mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	__	__	M8	22mm	Silver	Zinc-Plated Steel	Silver	Zinc-Plated Steel	4	0000000	0000
45mm	90mm	__	__	__	M8	25mm	Silver	316 Stainless Steel	Silver	316 Stainless Steel	1	00000000	0000

Miniature T-Slotted Framing and Fittings

Build test fixtures, prototypes, and other small structures with this miniature version of T-slotted framing and fittings. The framing has continuous T-slots for attaching fittings with the included mounting fasteners.

Single Rails—Silver-Anodized Aluminum

Rail Ht., mm	Rail Wd., mm	Rail Construction	T-Slot Wd., mm	T-Slot Depth, mm		3"	6"	9"	12"	18"	24"
10	10	Hollow	3	2.9	000000	00000	00000	00000	00000	000000	000000

Fasteners

Button
Head
Cap Screw

Flat Head Screw

Self-Aligning End-Feed Nut

Fasteners secure brackets and other accessories to rails.

Self-aligning end-feed nuts slide into the end of the rail to attach components. A ridge keeps them centered in the T-slot.

							Silver
Fastener Type	Material	For Rail Ht., mm	Thread Size	Lg., mm	Thick., mm	Pkg. Qty.		Pkg.
Button Head Cap Screw	Zinc-Plated Steel	10	M3	4	__	40	0000000	000000
Button Head Cap Screw	Zinc-Plated Steel	10	M3	5	__	40	0000000	0000
Flat Head Screw	Zinc-Plated Steel	10	M3	4	__	40	0000000	00000
Flat Head Screw	Zinc-Plated Steel	10	M3	5	__	40	0000000	00000
Self-Aligning End-Feed Nut	17-4 PH Stainless Steel	10	M3	__	2.6	20	0000000	00000