T-Slotted Framing Rails
Use this versatile framing to configure machine guards, enclosures, carts, and workstations. These rails have continuous T-slots for attaching fittings. When choosing how many slots you want on your rail, consider how much flexibility you need for your setup and how finished you'd like your structure to appear. The more slots the rail has, the more design flexibility you will have. Keep in mind, open slots can collect dust and debris. Rails with closed sides give you a finished appearance but are more difficult to reconfigure or add components to later. All of these rails are made of aluminum.
Low-profile rails are half the width of double rails. They’re often used to attach handles, sensors, and other accessories.
Solid rails are stronger than hollow rails. Smooth rails give a finished look. With no indentations to collect dust, they’re easier to clean than grooved rails. However, dents and marks are easier to see.
Black rails fade into the background and hide dirt and grime. They're good for vision systems where non-reflective material is needed. Cut-to-length rails can be ordered in increments of 0.125” or 0.25 cm.
To order: Please specify length in increments of 0.125” within the range listed.
To order: Please specify length in increments of 0.25 cm within the range listed.
To order: Please specify length in increments of 0.125” within the range listed.
| Rail Ht. | Rail Wd. | Rail Construction | T-Slot Wd. | T-Slot Dp. | Choose a Length | Per Inch | |
Silver Anodized Aluminum—Smooth Rail Texture | |||||||
|---|---|---|---|---|---|---|---|
| 25mm | 12.5mm | Solid | 6.5mm | 8.1mm | 0.75" to 145" in 0.125" increments | 6575N389 | 00000 |
T-Slotted Framing Fasteners
Screw and nut sets or nuts secure brackets and other accessories to rails.
End-feed fasteners slide into the end of the rail to attach components. They form stronger connections than drop-in fasteners because more surface area touches the rail.
Drop-in fasteners fit directly into the T-slot to attach components—no need to disassemble your existing structure. However, they form less secure connections than end-feed fasteners because less surface area touches the rail.
Nuts with threadlocker have an adhesive on the threads that prevents loosening due to vibration.
Self-aligning nuts have a ridge that keeps them centered in the T-slot.
Use double and triple nuts to install brackets with multiple holes. They eliminate the need for a single nut and screw for each hole.
Offset nuts have a mounting hole close to one end, so you can install them next to corners and rail ends.
Stainless steel is stronger than plastic and more corrosion resistant than steel. It withstands salt water and chemicals.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Mounting Hole Location | Thread Size  | Thickness | Color | Material | Pkg. Qty. | Pkg. | |
Single Nut | ||||||||||
| 1", 25mm | 2", 50mm | 3" | Center | 8-32 | 0.124" | Black | Zinc-Plated Steel | 10 | 4976N37 | 00000 |
| 1", 25mm | 2", 50mm | 3" | Center | 10-32 | 0.124" | Black | Zinc-Plated Steel | 10 | 4976N36 | 0000 |
| 1", 25mm | 2", 50mm | 3" | Center | 1/4"-20 | 0.124" | Silver | Steel | 25 | 47065T905 | 0000 |
| 1", 25mm | 2", 50mm | 3" | Center | 1/4"-20 | 0.124" | Silver | 304 Stainless Steel | 10 | 4976N35 | 0000 |
| 1", 25mm | 2", 50mm | 3" | Offset | 10-32 | 0.150" | Silver | 304 Stainless Steel | 10 | 4976N22 | 0000 |
| 1", 25mm | 2", 50mm | 3" | Offset | 10-32 | 0.167" | Black | Zinc-Plated Steel | 10 | 4976N21 | 0000 |
| 1", 25mm | 2", 50mm | 3" | Offset | 1/4"-20 | 0.167" | Black | Zinc-Plated Steel | 10 | 4976N19 | 0000 |
| 1", 25mm | 2", 50mm | 3" | Offset | M5 | 0.167" | Silver | Zinc-Plated Steel | 10 | 4976N23 | 0000 |
| 1", 25mm | 2", 50mm | 3" | Offset | M6 | 0.167" | Silver | Zinc-Plated Steel | 10 | 4976N24 | 0000 |
Single Nut with Threadlocker | ||||||||||
| 1", 25mm | 2", 50mm | 3" | Center | 1/4"-20 | 0.124" | Black | Zinc-Plated Steel | 10 | 3136N279 | 0000 |
Self-Aligning Nut | ||||||||||
| 1", 25mm | 2", 50mm | 3" | Center | M4 | 0.177" | Silver | Zinc-Plated Steel | 4 | 5278N51 | 0000 |
| 1", 25mm | 2", 50mm | 3" | Center | M6 | 0.177" | Silver | Zinc-Plated Steel | 4 | 5278N52 | 0000 |
Double Nut | ||||||||||
| 25mm | 50mm | __ | Offset | M6 | 0.145" | Silver | Zinc-Plated Steel | 10 | 4976N41 | 0000 |
Center Hole
and Button Head
Center Hole and
Flanged Button Head
Button head screws are more compact, so they're better for tight spaces than other screws for T-slotted framing.
Flanged button head screws have a wider head than standard button head fasteners, so you don’t need a washer for wide mounting holes.
For Rail Ht. | Mounting | Screw | Nut | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Hole Location | Fastener Thread Size | Fastener Thread Lg. | Color | Material | Color | Material | Pkg. Qty. | Pkg. | |
Single Nut with Button Head | ||||||||||||
| 1", 25mm | 2", 50mm | 3" | Center | 1/4"-20 | 3/8" | Black | Painted Steel | Black | Zinc-Plated Steel | 4 | 5158N26 | 00000 |
| 1", 25mm | 2", 50mm | 3" | Center | 1/4"-20 | 1/2" | Black | Zinc-Plated Steel | Black | Zinc-Plated Steel | 4 | 47065T139 | 0000 |
Single Nut with Flanged Button Head | ||||||||||||
| 1", 25mm | 2", 50mm | 3" | Center | 1/4"-20 | 1/2" | Black | Zinc-Plated Steel | Black | Zinc-Plated Steel | 4 | 47065T142 | 0000 |
 |  Set Screw Nut |  Nut with Handle |  Hammer Nut |
 Set Screw Nut |  Nut with Handle |  Hammer Nut |
Set screw nuts can be tightened in place, so they won’t budge, even on vertical rails, until you unscrew them.
Static-control nuts have serrations that pierce the anodized coating of the rail, which dissipates static charges to protect sensitive electronic equipment.
Nuts with a handle are easy to grip and drop in place. The flexible rubber handle bends to fit underneath objects mounted to the rail.
Hammer nuts drop in to the slot and turn into place when the screw is tightened.
Offset nuts have a mounting hole close to one end, so you can install them next to corners and rail ends.
Stainless steel is stronger than plastic and more corrosion resistant than steel. It withstands salt water and chemicals.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Mounting Hole Location | Thread Size | Thickness | Color | Material | Pkg. Qty. | Pkg. | |
Set Screw Nut | ||||||||||
| 1", 25mm | 2", 50mm | 3" | Offset | 10-32 | 0.200" | Black | Zinc-Plated Steel | 4 | 5021N27 | 000000 |
| 1", 25mm | 2", 50mm | 3" | Offset | 1/4"-20 | 0.200" | Black | Zinc-Plated Steel | 4 | 5021N26 | 00000 |
Nut with Handle | ||||||||||
| 1", 25mm | 2", 50mm | 3" | Offset | 10-32 | 0.200" | Black | Zinc-Plated Steel | 4 | 5021N38 | 00000 |
| 1", 25mm | 2", 50mm | 3" | Offset | 1/4"-20 | 0.200" | Black | Zinc-Plated Steel | 4 | 5021N37 | 00000 |
Hammer Nut—Static Control | ||||||||||
| 1", 25mm | 2", 50mm | 3" | Center | M4 | 0.165" | Silver | Zinc-Plated Steel | 4 | 6000N209 | 0000 |
| 1", 25mm | 2", 50mm | 3" | Center | M4 | 0.165" | Silver | 304 Stainless Steel | 4 | 6000N21 | 0000 |
Nut with Flanged
Button Head
and Flanged
Button Head
Nut with
Button Head
with Flanged
Button Head
Spring-loaded ball nuts hold themselves in place, so they won’t slide down vertical rails. The ball glides over holes, so they’re easy to reposition.
Button head screws are more compact, so they're better for tight spaces than other screws for T-slotted framing.
Flanged button head screws have a wider head than standard button head fasteners, so you don’t need a washer for wide mounting holes.
Nuts with a handle are easy to grip and drop in place. The flexible rubber handle bends to fit underneath objects mounted to the rail.
Hammer nuts drop in to the slot and turn into place when the screw is tightened.
Offset nuts have a mounting hole close to one end, so you can install them next to corners and rail ends.
For Rail Ht. | Mounting | Screw | Nut | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Hole Location | Fastener Thread Size | Fastener Thread Lg. | Color | Material | Color | Material | Pkg. Qty. | Pkg. | |
Spring-Loaded Ball Nut with Flanged Button Head | ||||||||||||
| 1", 25mm | 2", 50mm | 3" | Offset | 1/4"-20 | 1/2" | Black | Zinc-Plated Steel | Silver | Zinc-Plated Steel | 4 | 3136N405 | 00000 |
Nut with Handle and Flanged Button Head | ||||||||||||
| 1", 25mm | 2", 50mm | 3" | Offset | 1/4"-20 | 1/2" | Black | Zinc-Plated Steel | Black | Zinc-Plated Steel | 4 | 47065T151 | 00000 |
Hammer Nut with Button Head | ||||||||||||
| 1", 25mm | 2", 50mm | 3" | Center | M4 | 8mm | Silver | Zinc-Plated Steel | Silver | Zinc-Plated Steel | 4 | 5158N34 | 0000 |
Hammer Nut with Flanged Button Head | ||||||||||||
| 1", 25mm | 2", 50mm | 3" | Center | M4 | 10mm | Silver | Zinc-Plated Steel | Silver | Zinc-Plated Steel | 4 | 5158N33 | 0000 |
T-Slotted Framing Structural Brackets
Connect T-slotted rails and reinforce joints for structural stability. Fasteners are included.
Corner brackets are also known as angle brackets.
Extended brackets have more connection points for stronger connections than standard-length brackets.
Slotted corner brackets have elongated mounting holes for increased adjustability.
Gusset brackets are reinforced to limit sway for more structural stability than standard corner brackets. Open gusset brackets give you easy access to the fasteners, which is useful if your application requires frequent adjustments. Closed gusset brackets include a cover for a finished appearance and better dust protection than open gusset brackets.
| For Rail Ht. | Lg. | Rail Machining | Mounting Fasteners Included | Material | Each | |
Silver | ||||||
|---|---|---|---|---|---|---|
Corner | ||||||
| 25mm | 63/64" | Not Required | Yes | Anodized 6063 Aluminum | 4844N123 | 00000 |
Extended Corner | ||||||
| 25mm | 1 31/32" | Not Required | Yes | Anodized 6063 Aluminum | 4844N121 | 00000 |
Slotted Corner | ||||||
| 25mm | 63/64" | Not Required | Yes | Anodized 6063 Aluminum | 4844N117 | 0000 |
Open Gusset | ||||||
| 25mm | 63/64" | Not Required | Yes | Anodized 6063 Aluminum | 4844N108 | 0000 |
Extended Open Gusset | ||||||
| 25mm | 1 31/32" | Not Required | Yes | Anodized 6063 Aluminum | 4844N105 | 00000 |
Closed Gusset | ||||||
| 25mm | 23/32" | Not Required | Yes | Powder-Coated Aluminum | 4844N111 | 0000 |
Black | ||||||
Corner | ||||||
| 25mm | 63/64" | Not Required | Yes | Anodized 6063 Aluminum | 4844N124 | 0000 |
Extended Corner | ||||||
| 25mm | 1 31/32" | Not Required | Yes | Anodized 6063 Aluminum | 4844N122 | 00000 |
Open Gusset | ||||||
| 25mm | 63/64" | Not Required | Yes | Anodized 6063 Aluminum | 4844N109 | 00000 |
Corner brackets are also known as angle brackets.
Outside corner and three-way outside corner brackets connect the ends of rails for a finished look at your corner. To install, tap the existing hole in the end of each rail and screw the bracket in.
| For Rail Ht. | Lg. | Color | Material | Required Tap Thread Size | Rail Machining | Mounting Fasteners Included | Each | |
Outside Corner for Four Slot Single Rails | ||||||||
|---|---|---|---|---|---|---|---|---|
| 25mm | 1" | Silver | Lacquer-Coated Aluminum | M6 | Required | Yes | 4844N112 | 000000 |
Three-Way Outside Corner for Four Slot Single Rails | ||||||||
| 25mm | 1" | Silver | Lacquer-Coated Aluminum | M6 | Required | Yes | 4844N113 | 00000 |
Surface brackets create strong connection points because they secure to the surface of rails.
Straight brackets are simple brackets that can be used to make 90°, end-to-end, and parallel connections.
Extended brackets have more connection points for stronger connections than standard-length brackets.
90° angle brackets make a corner or create another 90° connection along your rail.
Flush tee and flush 90° angle brackets create a finished appearance. However, they are not as strong as standard tee or 90° angle brackets.
| For Rail Ht. | Lg. | Rail Machining | Mounting Fasteners Included | Material | Each | |
Silver | ||||||
|---|---|---|---|---|---|---|
Straight | ||||||
| 1", 25mm | 1 31/32" | Not Required | Yes | Anodized 6063 Aluminum | 4844N136 | 00000 |
| 1", 25mm | 2" | Not Required | Yes | Anodized 6063 Aluminum | 47065T255 | 0000 |
Extended Straight | ||||||
| 1", 25mm | 3 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 4844N134 | 00000 |
90° Angle | ||||||
| 25mm | 2 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 4844N132 | 00000 |
Extended 90° Angle | ||||||
| 25mm | 3 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 4844N131 | 00000 |
Cross | ||||||
| 25mm | 4 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 4844N129 | 00000 |
Tee | ||||||
| 1", 25mm | 3" | Not Required | Yes | Anodized 6063 Aluminum | 47065T278 | 00000 |
| 25mm | 3 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 4844N127 | 00000 |
Flush Tee | ||||||
| 25mm | 2 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 4844N125 | 00000 |
Flush 90° Angle | ||||||
| 25mm | 2 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 4844N126 | 00000 |
Black | ||||||
Straight | ||||||
| 1", 25mm | 2" | Not Required | Yes | Anodized 6063 Aluminum | 47065T832 | 00000 |
| 25mm | 1 31/32" | Not Required | Yes | Anodized 6063 Aluminum | 4844N137 | 00000 |
Extended Straight | ||||||
| 25mm | 3 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 4844N135 | 00000 |
90° Angle | ||||||
| 25mm | 2 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 4844N133 | 00000 |
Cross | ||||||
| 1", 25mm | 5" | Not Required | Yes | Anodized 6063 Aluminum | 47065T597 | 00000 |
Tee | ||||||
| 1", 25mm | 3" | Not Required | Yes | Anodized 6063 Aluminum | 47065T315 | 00000 |
| 25mm | 3 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 4844N128 | 00000 |
Yellow | ||||||
Straight | ||||||
| 1", 25mm | 2" | Not Required | Yes | Anodized 6063 Aluminum | 3136N162 | 00000 |
Tee | ||||||
| 1", 25mm | 3" | Not Required | Yes | Anodized 6063 Aluminum | 3136N164 | 00000 |
Concealed brackets mount internally and stay out of sight once installed.
Corner concealed brackets slide into the T-slots of your two intersecting rails, leaving the outside surface slots open for mounting other components.
For Rail Ht. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Color | Material | Rail Machining | Mounting Fasteners Included | Each | |
| 1", 25mm | 2", 50mm | 3" | Silver | Zinc | Not Required | Yes | 5537T315 | 00000 |
Concealed brackets mount internally and stay out of sight once installed.
Anchor concealed brackets allow positioning anywhere along the mating rail’s T-slot. Drill an installation hole in the face of one rail to install. Since the fastener is machined into the rail profile, these brackets create stronger connections than other brackets that don’t require machining. You can also use these brackets with our rails with machined bore holes.
Concealed brackets mount internally and stay out of sight once installed.
Tabbed concealed brackets require one hole to install the connector and one drilled access hole in the mating rail to secure the connection. You can also use these brackets with our machined rails with tapped or access holes. The brackets with a required tap thread size create stronger connections than other brackets that don't have tapped holes because the fasteners are machined into the rail profile.
| For Rail Ht. | Color | Material | Required Tap Thread Size | Required Access Hole Dia. | Rail Machining | Mounting Fasteners Included | Each | |
Tabbed Concealed Brackets | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1", 25mm | Black | Zinc-Plated Steel | 1/4"-20 | 7/32" | Required | Yes | 47065T155 | 00000 |
Tabbed Concealed Brackets for Radius Two Slot Rails | ||||||||
| 1", 25mm | Black | Zinc-Plated Steel | 1/4"-20 | 7/32" | Required | Yes | 3136N244 | 0000 |
T-Slotted Framing Slides, Tracks, and Rollers
Slide drawers, panels, and doors with these tracks and rollers.
Rail slides allow one rail to slide along another. Made from a single piece of plastic, they can be cut to size for a variety of applications. Adjust their positioning without fasteners. While simple to install, they are less secure than heavy duty rail slides.
Rail slides with a T-shaped side install on either the top or bottom rail. They slide into the end of the slot and won’t fall out, so you can use them to hang something.
Rail slides with a flat side attach to a component with fasteners. You can place heavy components on top without using fasteners.
For Rail Ht. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Lg. | Wd. | Capacity, lbs. | Color | Material | Mounting Fasteners Included | Each | |
T × Flat | |||||||||
| 25mm | 50mm | 1 13/16" | 13/16" | 12 | White | Plastic | No | 4028N27 | 00000 |
Pivoting rail slides can rotate rails 360° even while sliding along the other T-slotted rail. They are often used to make an accordion or bifold door.
To install perpendicular slides, tap a hole in the end of the rail and screw in the slide.
Rail slides with a straight side drop into T-slotted rail to guide the sliding rail. They don’t require access to the end of the rail to install, but they can’t be used to hang something on their own because they will fall out of the slot.
Rail slides with a T-shaped side install on either the top or bottom rail. They slide into the end of the slot and won’t fall out, so you can use them to hang something.