T-Slotted Framing Rails
Use this versatile framing to configure machine guards, enclosures, carts, and workstations. These rails have continuous T-slots for attaching fittings. When choosing how many slots you want on your rail, consider how much flexibility you need for your setup and how finished you'd like your structure to appear. The more slots the rail has, the more design flexibility you will have. Keep in mind, open slots can collect dust and debris. Rails with closed sides give you a finished appearance but are more difficult to reconfigure or add components to later. All of these rails are made of aluminum.
Double-, triple-, and quad-profile rails are good for large structural applications, such as beams and posts. Typically, the larger the rail profile, the stronger the rail.
Hollow rails are lighter and more economical than solid rails.
Smooth rails give a finished look. With no indentations to collect dust, they’re easier to clean than grooved rails. However, dents and marks are easier to see.
Black rails fade into the background and hide dirt and grime. They're good for vision systems where non-reflective material is needed. Cut-to-length rails can be ordered in increments of 0.125” or 0.25 cm.
To order: Please specify length in increments of 0.125” within the range listed.
To order: Please specify length in increments of 0.25 cm within the range listed.
| Rail Ht. | Rail Wd. | Rail Construction | T-Slot Wd. | T-Slot Dp. | Choose a Length | Per cm | |
Silver Anodized Aluminum—Smooth Rail Texture | |||||||
|---|---|---|---|---|---|---|---|
| 90mm | 45mm | Hollow | 10mm | 14.5mm | 2 cm to 609 cm in 0.25 cm increments | 00000000 | 00000 |
To order: Please specify length in increments of 0.125” within the range listed.
| Rail Ht. | Rail Wd. | Rail Construction | T-Slot Wd. | T-Slot Dp. | Choose a Length | Per Inch | |
Silver Anodized Aluminum—Smooth Rail Texture | |||||||
|---|---|---|---|---|---|---|---|
| 90mm | 90mm | Hollow | 10mm | 12.5mm | 2" to 220" in 0.125" increments | 00000000 | 00000 |
T-Slotted Framing Slides, Tracks, and Rollers
Slide drawers, panels, and doors with these tracks and rollers.
Rail slides allow one rail to slide along another. Made from a single piece of plastic, they can be cut to size for a variety of applications. Adjust their positioning without fasteners. While simple to install, they are less secure than heavy duty rail slides.
Rail slides with a T-shaped side install on either the top or bottom rail. They slide into the end of the slot and won’t fall out, so you can use them to hang something.
Rail slides with a flat side attach to a component with fasteners. You can place heavy components on top without using fasteners.
Rail slides with a straight side drop into T-slotted rail to guide the sliding rail. They don’t require access to the end of the rail to install, but they can’t be used to hang something on their own because they will fall out of the slot.
Rail slides with a T-reducer allow you to transition between differently sized rails.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | Lg. | Wd. | Capacity, lbs. | Color | Material | Mounting Fasteners Included | Each | |
T × Flat | ||||||||||
| 45mm | 90mm | __ | 3 1/8" | 1 9/16" | Not Rated | White | Plastic | No | 0000000 | 00000 |
T × Straight | ||||||||||
| 45mm | 90mm | __ | 3 1/8" | 1 9/16" | Not Rated | White | Plastic | No | 0000000 | 0000 |
T × T | ||||||||||
| 45mm | 90mm | __ | 3 1/8" | 1 9/16" | Not Rated | White | Plastic | No | 0000000 | 0000 |
T × T-Reducer | ||||||||||
| 30mm, 45mm | 60mm, 90mm | 120mm | 2 3/8" | 7/8" | Not Rated | White | Plastic | Yes | 0000000 | 0000 |
T-Slotted Framing Fasteners
Screw and nut sets or nuts secure brackets and other accessories to rails.
End-feed fasteners slide into the end of the rail to attach components. They form stronger connections than drop-in fasteners because more surface area touches the rail.
Drop-in fasteners fit directly into the T-slot to attach components—no need to disassemble your existing structure. However, they form less secure connections than end-feed fasteners because less surface area touches the rail.
Self-aligning nuts have a ridge that keeps them centered in the T-slot.
Use double and triple nuts to install brackets with multiple holes. They eliminate the need for a single nut and screw for each hole.
Offset nuts have a mounting hole close to one end, so you can install them next to corners and rail ends.
For Rail Ht. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Mounting Hole Location | Thread Size  | Thickness | Color | Material | Pkg. Qty. | Pkg. | |
Single Nut | |||||||||
| 45mm | 90mm | Offset | M8 | 0.217" | Black | Zinc-Plated Steel | 10 | 00000000 | 00000 |
Self-Aligning Nut | |||||||||
| 45mm | 90mm | Center | M5 | 0.315" | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 45mm | 90mm | Center | M6 | 0.315" | Silver | Zinc-Plated Steel | 4 | 00000000 | 0000 |
| 45mm | 90mm | Center | M8 | 0.315" | Silver | Zinc-Plated Steel | 4 | 00000000 | 0000 |
Double Nut | |||||||||
| 45mm | 90mm | Offset | M8 | 0.217" | Black | Zinc-Plated Steel | 10 | 00000000 | 0000 |
Center Hole
and Button Head
Offset Hole and
Flanged Button Head
Button head screws are more compact, so they're better for tight spaces than other screws for T-slotted framing.
Flanged button head screws have a wider head than standard button head fasteners, so you don’t need a washer for wide mounting holes.
Self-aligning nuts have a ridge that keeps them centered in the T-slot.
Use double and triple nuts to install brackets with multiple holes. They eliminate the need for a single nut and screw for each hole.
Offset nuts have a mounting hole close to one end, so you can install them next to corners and rail ends.
Stainless steel is stronger than plastic and more corrosion resistant than steel. It withstands salt water and chemicals.
For Rail Ht. | Mounting | Screw | Nut | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Hole Location | Fastener Thread Size | Fastener Thread Lg. | Color | Material | Color | Material | Pkg. Qty. | Pkg. | |
Single Nut with Button Head | |||||||||||
| 45mm | 90mm | Center | M8 | 16mm | Black | Zinc-Plated Steel | Black | Zinc-Plated Steel | 4 | 00000000 | 00000 |
Single Nut with Flanged Button Head | |||||||||||
| 45mm | 90mm | Offset | M8 | 16mm | Silver | 304 Stainless Steel | Silver | 304 Stainless Steel | 4 | 00000000 | 0000 |
| 45mm | 90mm | Offset | M8 | 16mm | Black | Zinc-Plated Steel | Black | Zinc-Plated Steel | 4 | 00000000 | 0000 |
Self-Aligning Nut with Button Head | |||||||||||
| 45mm | 90mm | Center | M8 | 20mm | Silver | Zinc-Plated Steel | Silver | Zinc-Plated Steel | 4 | 00000000 | 0000 |
Double Nut with Flanged Button Head | |||||||||||
| 45mm | 90mm | Offset | M8 | 16mm | Black | Zinc-Plated Steel | Black | Zinc-Plated Steel | 4 | 00000000 | 0000 |
Triple Nut with Flanged Button Head | |||||||||||
| 45mm | 90mm | Center, Offset | M8 | 16mm | Black | Zinc-Plated Steel | Black | Zinc-Plated Steel | 4 | 00000000 | 00000 |
 |  Self-Aligning Nut |  Self-Aligning Spring-Tab Nut |  Hammer Nut | Self-Aligning Nut |  Self-Aligning Spring-Tab Nut | |
 Hammer Nut | ||||||
Self-aligning nuts have a ridge that keeps them centered in the T-slot.
Spring-tab nuts have a flexible tab on the side that holds them in place on vertical rails. It also compensates for different slot depths.
Static-control nuts have serrations that pierce the anodized coating of the rail, which dissipates static charges to protect sensitive electronic equipment.
Hammer nuts drop in to the slot and turn into place when the screw is tightened.
Stainless steel is stronger than plastic and more corrosion resistant than steel. It withstands salt water and chemicals.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Mounting Hole Location | Thread Size | Thickness | Color | Material | Pkg. Qty. | Pkg. | |
Self-Aligning Nut | ||||||||||
| 45mm | 90mm | __ | Center | 10-32 | 0.205" | Silver | Zinc-Plated Steel | 4 | 0000000 | 00000 |
| 45mm | 90mm | __ | Center | 1/4"-20 | 0.205" | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 45mm | 90mm | __ | Center | 5/16"-18 | 0.205" | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 45mm | 90mm | __ | Center | M4 | 0.205" | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 45mm | 90mm | __ | Center | M5 | 0.205" | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 45mm | 90mm | __ | Center | M6 | 0.205" | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 45mm | 90mm | __ | Center | M8 | 0.205" | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
Self-Aligning Spring-Tab Nut | ||||||||||
| 1 1/2", 30mm, 40mm | 3", 60mm, 80mm | 4 1/2", 120mm, 90mm | Center | M4 | 0.181" | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 1 1/2", 30mm, 40mm | 3", 60mm, 80mm | 4 1/2", 120mm, 90mm | Center | M5 | 0.181" | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 1 1/2", 30mm, 40mm | 3", 60mm, 80mm | 4 1/2", 120mm, 90mm | Center | M6 | 0.181" | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 1 1/2", 30mm, 40mm | 3", 60mm, 80mm | 4 1/2", 120mm, 90mm | Center | M8 | 0.181" | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 45mm | 90mm | __ | Center | 10-32 | 0.205" | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 45mm | 90mm | __ | Center | 1/4"-20 | 0.205" | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 45mm | 90mm | __ | Center | 5/16"-18 | 0.205" | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 45mm | 90mm | __ | Center | M4 | 0.205" | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 45mm | 90mm | __ | Center | M5 | 0.205" | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 45mm | 90mm | __ | Center | M6 | 0.236" | Silver | Zinc-Plated Steel | 4 | 00000000 | 0000 |
| 45mm | 90mm | __ | Center | M8 | 0.205" | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
Hammer Nut—Static Control | ||||||||||
| 45mm | 90mm | __ | Center | 10-32 | 0.346" | Silver | Zinc-Plated Steel | 4 | 00000000 | 0000 |
| 45mm | 90mm | __ | Center | 1/4"-20 | 0.346" | Silver | Zinc-Plated Steel | 4 | 00000000 | 0000 |
| 45mm | 90mm | __ | Center | 1/4"-20 | 0.346" | Silver | 304 Stainless Steel | 4 | 00000000 | 00000 |
| 45mm | 90mm | __ | Center | 5/16"-18 | 0.346" | Silver | Zinc-Plated Steel | 4 | 00000000 | 0000 |
| 45mm | 90mm | __ | Center | 5/16"-18 | 0.346" | Silver | 304 Stainless Steel | 4 | 00000000 | 00000 |
| 45mm | 90mm | __ | Center | M4 | 0.346" | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 45mm | 90mm | __ | Center | M5 | 0.346" | Silver | Zinc-Plated Steel | 4 | 00000000 | 0000 |
| 45mm | 90mm | __ | Center | M6 | 0.343" | Silver | Zinc-Plated Steel | 4 | 00000000 | 0000 |
| 45mm | 90mm | __ | Center | M6 | 0.343" | Silver | 304 Stainless Steel | 4 | 00000000 | 0000 |
| 45mm | 90mm | __ | Center | M8 | 0.327" | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 45mm | 90mm | __ | Center | M8 | 0.343" | Silver | 304 Stainless Steel | 4 | 00000000 | 00000 |
with Button
Head
Nut with
Button Head
with Flanged
Button Head
with Socket
Head
Nut with Handle
and Button Head
Spring nuts hold themselves in place, so they won't slide down vertical rails.
Self-aligning nuts have a ridge that keeps them centered in the T-slot.
Spring-tab nuts have a flexible tab on the side that holds them in place on vertical rails. It also compensates for different slot depths.
Button head screws are more compact, so they're better for tight spaces than other screws for T-slotted framing.
Flanged button head screws have a wider head than standard button head fasteners, so you don’t need a washer for wide mounting holes.
Socket head screws have a deeper drive than other head styles, so they withstand more torque for a tighter hold.
Nuts with a handle are easy to grip and drop in place. The flexible rubber handle bends to fit underneath objects mounted to the rail.
Hammer nuts drop in to the slot and turn into place when the screw is tightened.
Nuts with a stud can be tightened in place with a socket wrench. When the line on the end of the stud is perpendicular to the rail, the nut is properly in place.
Static-control nuts have serrations that pierce the anodized coating of the rail, which dissipates static charges to protect sensitive electronic equipment.
Offset nuts have a mounting hole close to one end, so you can install them next to corners and rail ends.
Stainless steel is stronger than plastic and more corrosion resistant than steel. It withstands salt water and chemicals.
For Rail Ht. | Mounting | Screw | Nut | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Hole Location | Fastener Thread Size | Fastener Thread Lg. | Color | Material | Color | Material | Pkg. Qty. | Pkg. | |
Spring Nut with Button Head | |||||||||||
| 45mm | 90mm | Center | M8 | 20mm | Silver | Zinc-Plated Steel | Silver | Zinc-Plated Steel | 4 | 0000000 | 00000 |
Self-Aligning Spring-Tab Nut with Button Head | |||||||||||
| 45mm | 90mm | Center | M8 | 20mm | Silver | Zinc-Plated Steel | Silver | Zinc-Plated Steel | 4 | 00000000 | 0000 |
Hammer Nut with Button Head | |||||||||||
| 45mm | 90mm | Center | 1/4"-20 | 5/8" | Black | Zinc-Plated Steel | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 45mm | 90mm | Center | M4 | 12mm | Silver | Zinc-Plated Steel | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 45mm | 90mm | Center | M8 | 20mm | Silver | Zinc-Plated Steel | Silver | Zinc-Plated Steel | 4 | 00000000 | 0000 |
| 45mm | 90mm | Center | M8 | 20mm | Silver | 304 Stainless Steel | Silver | 304 Stainless Steel | 4 | 00000000 | 00000 |
Hammer Nut with Flanged Button Head | |||||||||||
| 45mm | 90mm | Center | 1/4"-20 | 1/2" | Black | Zinc-Plated Steel | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
Hammer Nut with Socket Head | |||||||||||
| 45mm | 90mm | Center | M8 | 20mm | Silver | Zinc-Plated Steel | Silver | Zinc-Plated Steel | 4 | 00000000 | 0000 |
Hammer Nut with Stud—Static Control | |||||||||||
| 45mm | 90mm | __ | M8 | 22mm | Silver | Zinc-Plated Steel | Silver | Zinc-Plated Steel | 4 | 0000000 | 0000 |
| 45mm | 90mm | __ | M8 | 25mm | Silver | 316 Stainless Steel | Silver | 316 Stainless Steel | 1 | 00000000 | 0000 |
Self-Aligning Nut with Handle and Button Head | |||||||||||
| 45mm | 90mm | Offset | M8 | 16mm | Black | Zinc-Plated Steel | Black | Zinc-Plated Steel | 4 | 00000000 | 00000 |