T3 Temper Aluminum | McMaster-Carr

Filter by

Temper Designation

Shape

System of Measurement

Thickness

Material

Length

Width

Wall Thickness

Diameter

Certificate Type

Material Certificate with Traceable Lot Number

Appearance

Hardness Rating

Tolerance Rating

Fabrication

Specifications Met

Yield Strength

30,000 psi to 39,999 psi

40,000 psi or greater

Heat Treatment

Performance

Hardness

REACH

Export Control Classification Number (ECCN)

1C202

EAR99

RoHS

Compliant

Compliant with Exemptions

Not Compliant

DFARS Specialty Metals

Elongation

226 Products

About Aluminum

Compare over 20 aluminum alloys to find the right material for you—all with material certificates for traceability.

High-Strength 2024 Aluminum Sheets and Bars

While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.

Cold-rolled sheets are cut from large pieces to the widths and lengths listed, so the edges may not be parallel.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Sheets

Yield Strength: 41,000 psi
Hardness: Brinell 120 (Medium)
Temper:
0.020" to 0.190" thick. sheets: T3
All other sizes: T351
Fabrication: Cold Rolled
Specifications Met: ASTM B209

6" × 6"
Thick.	Thick. Tolerance	Heat Treatment	Temperature Range, °F		Each
0.020"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	00000
0.025"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	0000
0.032"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	0000
0.040"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	0000
0.050"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	0000
0.063"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	00000
0.080"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	00000
0.090"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	00000
0.100"	-0.004" to 0.004"	Hardened	-320° to 300°	000000000	00000
1/8"	-0.004" to 0.004"	Hardened	-320° to 300°	000000000	00000
0.160"	-0.007" to 0.007"	Hardened	-320° to 300°	000000000	00000
0.190"	-0.007" to 0.007"	Hardened	-320° to 300°	000000000	00000
8" × 8"
0.020"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	0000
0.025"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	0000
0.032"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	0000
0.040"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	00000
0.050"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	00000
0.063"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	00000
0.080"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	00000
0.090"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	00000
0.100"	-0.004" to 0.004"	Hardened	-320° to 300°	000000000	00000
1/8"	-0.004" to 0.004"	Hardened	-320° to 300°	000000000	00000
0.160"	-0.007" to 0.007"	Hardened	-320° to 300°	000000000	00000
0.190"	-0.007" to 0.007"	Hardened	-320° to 300°	000000000	00000
12" × 12"
0.020"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.025"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.032"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.040"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.050"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.063"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.080"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.090"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.100"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	00000
1/8"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	00000
0.160"	-0.007" to 0.007"	Hardened	-320° to 300°	00000000	00000
0.190"	-0.007" to 0.007"	Hardened	-320° to 300°	00000000	00000
12" × 24"
0.020"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.025"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.032"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.040"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.050"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.063"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.080"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.090"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.100"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	00000
1/8"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	000000
0.160"	-0.007" to 0.007"	Hardened	-320° to 300°	00000000	000000
0.190"	-0.007" to 0.007"	Hardened	-320° to 300°	00000000	000000
18" × 18"
0.020"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	00000
0.025"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	00000
0.032"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	00000
0.040"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	00000
0.050"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	00000
0.063"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	00000
0.080"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	00000
0.090"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	000000
0.100"	-0.004" to 0.004"	Hardened	-320° to 300°	000000000	000000
1/8"	-0.004" to 0.004"	Hardened	-320° to 300°	000000000	000000
0.160"	-0.007" to 0.007"	Hardened	-320° to 300°	000000000	000000
0.190"	-0.007" to 0.007"	Hardened	-320° to 300°	000000000	000000
24" × 24"
0.020"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.025"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.032"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.040"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.050"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.063"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	000000
0.080"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	000000
0.090"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	000000
0.100"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	000000
1/8"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	000000
0.160"	-0.007" to 0.007"	Hardened	-320° to 300°	00000000	000000
0.190"	-0.007" to 0.007"	Hardened	-320° to 300°	00000000	000000
24" × 48"
0.020"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.025"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.032"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	000000
0.040"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	000000
0.050"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	000000
0.063"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	000000
0.080"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	000000
0.090"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	000000
0.100"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	000000
1/8"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	000000
0.160"	-0.007" to 0.007"	Hardened	-320° to 300°	00000000	000000
0.190"	-0.007" to 0.007"	Hardened	-320° to 300°	00000000	000000
48" × 48"
0.020"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	000000
0.025"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	000000
0.032"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	000000
0.040"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	000000
0.050"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	000000
0.063"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	000000
0.080"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	000000
0.090"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	000000
0.100"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	000000
1/8"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	000000
0.190"	-0.007" to 0.007"	Hardened	-320° to 300°	00000000	00000000
48" × 72"
0.020"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	000000
0.025"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	000000
0.032"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	000000
0.040"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	000000
0.050"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	000000
0.063"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	000000
0.080"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	000000
0.090"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	000000
0.100"	-0.004" to 0.004"	Hardened	-320° to 300°	000000000	000000
1/8"	-0.004" to 0.004"	Hardened	-320° to 300°	000000000	000000
0.190"	-0.007" to 0.007"	Hardened	-320° to 300°	000000000	00000000

Clad High-Strength 2024 Aluminum Sheets

Yield Strength:
6" × 6": 45,000 psi
All other sizes: 42,000 psi
Hardness: Not Rated
Temper: T3
Fabrication: Cold Rolled
Specifications Met: ASTM B209, SAE AMS-QQ-A-250/5, SAE AMS4462

These sheets are clad in 1230 aluminum for an added layer of corrosion resistance. While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

6” × 6”
Thick.	Thick. Tolerance	Heat Treatment	Temperature Range		Each
0.016"	-0.0030" to 0.0030"	Hardened	-320° F to 300° F	0000000	00000
0.025"	-0.0020" to 0.0020"	Hardened	-320° F to 300° F	0000000	0000
0.032"	-0.0020" to 0.0020"	Hardened	-320° F to 300° F	0000000	0000
0.040"	-0.0030" to 0.0030"	Hardened	-320° F to 300° F	0000000	0000
0.050"	-0.0040" to 0.0040"	Hardened	-320° F to 300° F	0000000	0000
0.090"	-0.0050" to 0.0050"	Hardened	-320° F to 300° F	0000000	00000
12" × 12"
0.016"	-0.0015" to 0.0015"	Hardened	Not Rated	0000000	00000
0.025"	-0.0015" to 0.0015"	Hardened	Not Rated	0000000	00000
0.032"	-0.0015" to 0.0015"	Hardened	Not Rated	0000000	00000
0.040"	-0.0020" to 0.0020"	Hardened	Not Rated	0000000	00000
0.050"	-0.0020" to 0.0020"	Hardened	Not Rated	0000000	00000
0.063"	-0.0020" to 0.0020"	Hardened	Not Rated	0000000	00000
0.090"	-0.0025" to 0.0025"	Hardened	Not Rated	0000000	00000
0.125"	-0.0035" to 0.0035"	Hardened	Not Rated	0000000	00000
24” × 24”
0.016"	-0.0015" to 0.0015"	Hardened	Not Rated	0000000	00000
0.025"	-0.0015" to 0.0015"	Hardened	Not Rated	0000000	00000
0.032"	-0.0015" to 0.0015"	Hardened	Not Rated	0000000	00000
0.040"	-0.0020" to 0.0020"	Hardened	Not Rated	0000000	00000
0.050"	-0.0020" to 0.0020"	Hardened	Not Rated	0000000	00000
0.063"	-0.0020" to 0.0020"	Hardened	Not Rated	0000000	000000
0.090"	-0.0025" to 0.0025"	Hardened	Not Rated	0000000	000000
0.125"	-0.0035" to 0.0035"	Hardened	Not Rated	0000000	000000

High-Strength 2024 Aluminum Tubes

Yield Strength: 42,000 psi
Hardness: Brinell 120 (Medium)
Temper: T3
Fabrication: Cold Drawn
Specifications Met: ASTM B210

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

0.035" Wall Thick. (-0.004" to 0.004" Tolerance)
OD	OD Tolerance	ID	Heat Treatment	Temperature Range, °F		1 ft. Lg.	3 ft. Lg.	6 ft. Lg.
1/4"	-0.008" to 0.008"	0.180"	Hardened	-320° to 300°	0000000	000000	000000	000000
3/8"	-0.008" to 0.008"	0.305"	Hardened	-320° to 300°	0000000	00000	00000	00000
1/2"	-0.008" to 0.008"	0.430"	Hardened	-320° to 300°	0000000	00000	00000	00000
5/8"	-0.008" to 0.008"	0.555"	Hardened	-320° to 300°	0000000	00000	00000	00000
1"	-0.008" to 0.008"	0.930"	Hardened	-320° to 300°	0000000	00000	00000	00000
1 1/2"	-0.020" to 0.020"	1.430"	Hardened	-320° to 300°	0000000	00000	00000	00000
0.049" Wall Thick. (-0.005" to 0.005" Tolerance)
3/8"	-0.008" to 0.008"	0.277"	Hardened	-320° to 300°	0000000	00000	00000	00000
1/2"	-0.008" to 0.008"	0.402"	Hardened	-320° to 300°	0000000	00000	00000	00000
5/8"	-0.008" to 0.008"	0.527"	Hardened	-320° to 300°	0000000	00000	00000	00000
7/8"	-0.008" to 0.008"	0.777"	Hardened	-320° to 300°	0000000	00000	00000	00000
1"	-0.008" to 0.008"	0.902"	Hardened	-320° to 300°	0000000	00000	00000	00000
0.058" Wall Thick. (-0.006" to 0.006" Tolerance)
3/8"	-0.008" to 0.008"	0.259"	Hardened	-320° to 300°	0000000	00000	00000	00000
1/2"	-0.008" to 0.008"	0.384"	Hardened	-320° to 300°	0000000	00000	00000	00000
5/8"	-0.008" to 0.008"	0.509"	Hardened	-320° to 300°	0000000	00000	00000	00000
3/4"	-0.008" to 0.008"	0.634"	Hardened	-320° to 300°	0000000	00000	00000	00000
7/8"	-0.008" to 0.008"	0.759"	Hardened	-320° to 300°	0000000	00000	00000	00000
0.065" Wall Thick. (-0.007" to 0.007" Tolerance)
1/4"	-0.008" to 0.008"	0.120"	Hardened	-320° to 300°	0000000	00000	00000	00000
3/8"	-0.008" to 0.008"	0.245"	Hardened	-320° to 300°	0000000	00000	00000	00000
1/2"	-0.008" to 0.008"	0.370"	Hardened	-320° to 300°	0000000	00000	00000	00000
5/8"	-0.008" to 0.008"	0.495"	Hardened	-320° to 300°	0000000	00000	00000	00000
3/4"	-0.008" to 0.008"	0.620"	Hardened	-320° to 300°	0000000	00000	00000	00000
7/8"	-0.008" to 0.008"	0.745"	Hardened	-320° to 300°	0000000	00000	00000	00000
1"	-0.008" to 0.008"	0.870"	Hardened	-320° to 300°	0000000	00000	00000	00000
1 1/2"	-0.020" to 0.020"	1.370"	Hardened	-320° to 300°	0000000	00000	00000	000000
2"	-0.020" to 0.020"	1.870"	Hardened	-320° to 300°	0000000	00000	000000	000000
2 1/2"	-0.020" to 0.020"	2.370"	Hardened	-320° to 300°	0000000	00000	000000	000000
3"	-0.020" to 0.020"	2.870"	Hardened	-320° to 300°	0000000	00000	000000	000000
0.083" Wall Thick. (-0.01" to 0.01" Tolerance)
1/2"	-0.008" to 0.008"	0.334"	Hardened	-320° to 300°	0000000	00000	00000	00000
5/8"	-0.008" to 0.008"	0.459"	Hardened	-320° to 300°	0000000	00000	00000	00000
3/4"	-0.008" to 0.008"	0.584"	Hardened	-320° to 300°	0000000	00000	00000	00000
1"	-0.008" to 0.008"	0.834"	Hardened	-320° to 300°	0000000	00000	00000	00000
0.095" Wall Thick. (-0.011" to 0.011" Tolerance)
1/2"	-0.008" to 0.008"	0.310"	Hardened	-320° to 300°	0000000	00000	00000	00000
3/4"	-0.008" to 0.008"	0.560"	Hardened	-320° to 300°	0000000	00000	00000	000000
7/8"	-0.008" to 0.008"	0.685"	Hardened	-320° to 300°	0000000	00000	00000	000000
1"	-0.008" to 0.008"	0.810"	Hardened	-320° to 300°	0000000	00000	00000	000000
0.12" Wall Thick. (-0.014" to 0.014" Tolerance)
1/2"	-0.008" to 0.008"	0.260"	Hardened	-320° to 300°	0000000	00000	00000	00000
3/4"	-0.008" to 0.008"	0.510"	Hardened	-320° to 300°	0000000	00000	00000	00000
7/8"	-0.008" to 0.008"	0.635"	Hardened	-320° to 300°	0000000	00000	00000	000000
1"	-0.008" to 0.008"	0.760"	Hardened	-320° to 300°	0000000	00000	00000	000000
1 1/2"	-0.020" to 0.020"	1.260"	Hardened	-320° to 300°	0000000	00000	00000	000000
2"	-0.020" to 0.020"	1.760"	Hardened	-320° to 300°	0000000	00000	000000	000000
2 1/2"	-0.020" to 0.020"	2.260"	Hardened	-320° to 300°	0000000	00000	000000	000000
3"	-0.020" to 0.020"	2.760"	Hardened	-320° to 300°	0000000	000000	000000	000000
4"	-0.020" to 0.020"	3.760"	Hardened	-320° to 300°	0000000	000000	000000	000000
1/4" Wall Thick. (-0.03" to 0.03" Tolerance)
1"	-0.008" to 0.008"	0.500"	Hardened	-320° to 300°	0000000	00000	000000	000000
1 1/2"	-0.020" to 0.020"	1.000"	Hardened	-320° to 300°	0000000	00000	000000	000000
2"	-0.020" to 0.020"	1.500"	Hardened	-320° to 300°	0000000	000000	000000	000000
2 1/2"	-0.020" to 0.020"	2.000"	Hardened	-320° to 300°	0000000	000000	000000	000000
3"	-0.020" to 0.020"	2.500"	Hardened	-320° to 300°	0000000	000000	000000	000000
4"	-0.020" to 0.020"	3.500"	Hardened	-320° to 300°	0000000	000000	000000	000000
5"	-0.020" to 0.020"	4.500"	Hardened	-320° to 300°	0000000	000000	000000	00000000
6"	-0.020" to 0.020"	5.500"	Hardened	-320° to 300°	0000000	000000	000000	00000000

Easy-to-Machine 2011 Aluminum Bars

Yield Strength: 38,000 psi
Hardness: Brinell 115 (Soft)
Temper: T3
Fabrication: Cold Drawn
Specifications Met: ASTM B211, SAE AMS-QQ-A-225/3

2011 has the best machinability of all the aluminum alloys. It is the most selected aluminum for screws, tube fittings, hose parts, and other items that require extensive machining.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Thick.	Thick. Tolerance	Wd.	Heat Treatment	Temperature Range, °F	Straightness Tolerance		3 ft. Lg.	6 ft. Lg.
1/4"	-0.002" to 0.002"	1/4"	Hardened	-320° to 300°	0.025" per ft.	000000	00000	000000
3/8"	-0.002" to 0.002"	3/8"	Hardened	-320° to 300°	0.025" per ft.	000000	00000	00000
1/2"	-0.002" to 0.002"	1/2"	Hardened	-320° to 300°	0.025" per ft.	000000	00000	00000
5/8"	-0.003" to 0.003"	5/8"	Hardened	-320° to 300°	0.025" per ft.	000000	00000	00000
3/4"	-0.003" to 0.003"	3/4"	Hardened	-320° to 300°	0.025" per ft.	000000	00000	00000
1"	-0.003" to 0.003"	1"	Hardened	-320° to 300°	0.025" per ft.	000000	00000	000000
1 1/4"	-0.003" to 0.003"	1 1/4"	Hardened	-320° to 300°	0.025" per ft.	000000	00000	000000
1 1/2"	-0.003" to 0.003"	1 1/2"	Hardened	-320° to 300°	0.025" per ft.	000000	000000	000000

Easy-to-Machine 2011 Aluminum Rods

Yield Strength: 38,000 psi
Hardness: Brinell 115 (Soft)
Temper: T3
Fabrication: Cold Drawn
Specifications Met: ASTM B211

2011 has the best machinability of all the aluminum alloys. It is the most selected aluminum for screws, tube fittings, hose parts, and other items that require extensive machining.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Dia.	Dia. Tolerance	Heat Treatment	Max. Temperature, °F		1/2 ft. Lg.	1 ft. Lg.	2 ft. Lg.	3 ft. Lg.	6 ft. Lg.
1/4"	-0.002" to 0.002"	Hardened	212°	00000000	00000	00000	00000	00000	000000
3/8"	-0.002" to 0.002"	Hardened	212°	00000000	0000	0000	00000	00000	00000
1/2"	-0.002" to 0.002"	Hardened	212°	00000000	0000	0000	00000	00000	00000
5/8"	-0.002" to 0.002"	Hardened	212°	00000000	0000	00000	00000	00000	00000
3/4"	-0.002" to 0.002"	Hardened	212°	00000000	0000	00000	00000	00000	00000
7/8"	-0.002" to 0.002"	Hardened	212°	00000000	00000	00000	00000	00000	00000
1"	-0.002" to 0.002"	Hardened	212°	00000000	00000	00000	00000	00000	00000
1 1/8"	-0.003" to 0.003"	Hardened	212°	00000000	00000	00000	00000	00000	000000
1 1/4"	-0.003" to 0.003"	Hardened	212°	00000000	00000	00000	00000	00000	000000
1 3/8"	-0.003" to 0.003"	Hardened	212°	00000000	00000	00000	00000	00000	000000
1 1/2"	-0.003" to 0.003"	Hardened	212°	00000000	00000	00000	00000	000000	000000
1 5/8"	-0.004" to 0.004"	Hardened	212°	00000000	00000	00000	00000	000000	000000
1 3/4"	-0.004" to 0.004"	Hardened	212°	00000000	00000	00000	00000	000000	000000
1 7/8"	-0.004" to 0.004"	Hardened	212°	00000000	00000	00000	000000	000000	000000
2"	-0.004" to 0.004"	Hardened	212°	00000000	00000	00000	000000	000000	000000
2 1/4"	-0.006" to 0.006"	Hardened	212°	00000000	00000	00000	000000	000000	000000
2 1/2"	-0.006" to 0.006"	Hardened	212°	00000000	00000	00000	000000	000000	000000
2 3/4"	-0.006" to 0.006"	Hardened	212°	00000000	00000	000000	000000	000000	000000
3"	-0.006" to 0.006"	Hardened	212°	00000000	00000	000000	000000	000000	000000

Tight-Tolerance Easy-to-Machine 2011 Aluminum Rods

Yield Strength: 38,000 psi
Hardness: Brinell 95 (Soft)
Temper: T3
Fabrication: Cold Worked
Specifications Met: ASTM B211

Precision ground and held to a strict straightness tolerance, these rods are ready for turning in a lathe. 2011 has the best machinability of all the aluminum alloys. It is the most selected aluminum for screws, tube fittings, hose parts, and other items that require extensive machining.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Dia.	Dia. Tolerance	Heat Treatment	Max. Temperature, °F	Straightness Tolerance		1 ft. Lg.	3 ft. Lg.	6 ft. Lg.
1/8"	-0.0005" to 0"	Hardened	212°	0.005" per ft.	0000000	00000	000000	000000
1/4"	-0.0005" to 0"	Hardened	212°	0.005" per ft.	0000000	00000	00000	00000
3/8"	-0.0005" to 0"	Hardened	212°	0.005" per ft.	0000000	00000	00000	00000
1/2"	-0.0005" to 0"	Hardened	212°	0.005" per ft.	0000000	00000	00000	00000
5/8"	-0.0005" to 0"	Hardened	212°	0.005" per ft.	0000000	00000	00000	000000
3/4"	-0.0005" to 0"	Hardened	212°	0.005" per ft.	0000000	00000	00000	000000
1"	-0.0005" to 0"	Hardened	212°	0.005" per ft.	0000000	00000	000000	000000
1 1/2"	-0.0005" to 0"	Hardened	212°	0.005" per ft.	0000000	00000	000000	000000

Easy-to-Machine 2011 Aluminum Hex Bars

Yield Strength: 38,000 psi
Hardness: Brinell 115 (Soft)
Temper: T3
Fabrication: Cold Drawn
Specifications Met: ASTM B211

2011 has the best machinability of all the aluminum alloys. It is the most selected aluminum for screws, tube fittings, hose parts, and other items that require extensive machining.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Wd.	Wd. Tolerance	Heat Treatment	Max. Temperature, °F		1 ft. Lg.	3 ft. Lg.	6 ft. Lg.
1/4"	-0.003" to 0.003"	Hardened	212°	00000000	00000	000000	000000
5/16"	-0.003" to 0.003"	Hardened	212°	00000000	0000	00000	00000
3/8"	-0.003" to 0.003"	Hardened	212°	00000000	0000	00000	00000
1/2"	-0.003" to 0.003"	Hardened	212°	00000000	00000	00000	00000
9/16"	-0.003" to 0.003"	Hardened	212°	00000000	00000	00000	00000
5/8"	-0.003" to 0.003"	Hardened	212°	00000000	00000	00000	00000
3/4"	-0.003" to 0.003"	Hardened	212°	00000000	00000	00000	00000
7/8"	-0.003" to 0.003"	Hardened	212°	00000000	00000	00000	000000
1"	-0.003" to 0.003"	Hardened	212°	00000000	00000	00000	000000
1 1/8"	-0.003" to 0.003"	Hardened	212°	00000000	00000	00000	000000
1 1/4"	-0.003" to 0.003"	Hardened	212°	00000000	00000	000000	000000