Support sheets of wood and plastic on the large, flat table to make straight cuts with the built-in blade.

Weighing only 12 pounds, this bench-top saw is a portable choice for light duty cutting, such as frame making and model building.

Use the horizontal sliding arm to make angled cuts in wider boards than a standard miter saw can handle.

A high-torque motor powers these saws through tough metal, such as angle iron and tool steel. These saws must be hardwired.

The grinding action of the diamond-grit blade creates a smooth finish on hard materials such as glass, stone, tile, brick, and fiberglass.

Operate this saw at a low rpm to make quick cuts in metal without excessive heat or the need for coolant.

Cut wood, plywood, and particleboard.

Also known as dado-head blades, these are for cutting grooves in all types of wood.

Use these blades for occasional cutting.

A blend of tungsten carbide and diamond grits on the continuous edge of this blade cuts hard, nonmetallic materials including composites and graphite.

The carbide-grit edge on these blades cuts brittle and abrasive materials including glass and fiberglass.

The edge of the blade is segmented to cut faster than a continuous edge.

A continuous edge on these blades produces smooth cuts.

Use with water or coolant to produce smoother cuts in tile than dry-cutting blades. They're also for use on glass.

Teeth are carbide tipped and designed to push chips away from the blade to prevent clogging and produce smooth cuts in aluminum sheets, tubing, and T-slotted framing.

Prevent clogging when cutting soft metal—these blades have plenty of space between the carbide-tipped teeth to allow chips to escape.

Keep hands safely away from table saw blades and router bits by using these tools to guide material during cuts.