Cordless Bench-Top Table Saws
Turn any bench top into a table saw station with these portable saws. They give you the same power as electric bench-top table saws without needing access to an outlet. Their brushless motor optimizes battery usage and enhances longevity—they run cool and have few moving parts that require maintenance. To prevent kickback, a riving knife separates cut material so it can't pinch back in toward the blade. Small teeth known as anti-kickback pawls dig into the cut material if it begins to move backward. Connect the dust port to a dust collector to improve air quality and keep your work area clean.
Some saws include a rechargeable battery. For saws where they’re not included, see Milwaukee batteries and chargers and DeWalt batteries and chargers.
DeWalt saws have a higher voltage than Milwaukee saws, which helps them maintain speed while cutting thick and hard materials.
| Manufacturer Model No. | Voltage | Motor Type | For Blade Dia. | For Arbor Hole Size | No-Load Speed, rpm | Rip Cap. | Max. Cutting Dp. | Max. Bevel Cut Angle | Wt., lbs. | Batteries Included | Battery Charger Included | Blade Included | Includes | Features | Each | |
DeWalt | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DCS7485B | 20V DC 60V DC | Brushless | 8 1/4" | 5/8" | 5,800 | 24" | 2 1/2" | 47° | 48 | No | No | Yes | One 8 1/4" Dia. Carbide-Tipped Steel Blade for Wood (24 Teeth) | Dust Extraction Port, Kickback Reduction | 00000000 | 0000000 |
| DCS7485T1 | 20V DC 60V DC | Brushless | 8 1/4" | 5/8" | 5,800 | 24" | 2 1/2" | 47° | 48 | Yes | Yes | Yes | One 8 1/4" Dia. Carbide-Tipped Steel Blade for Wood (24 Teeth) | Dust Extraction Port, Kickback Reduction | 00000000 | 000000 |
Electric Miter Saws
Often used to create door frames and aluminum supports, these saws make precise angled cuts for tight-fitting joints. The head swivels to make miter cuts across the face of your material.
Style A saws have a tilting head that makes beveled cuts through the thickness of your material. Use these saws on wood and soft metals such as aluminum and copper.
 A |  Bevel Cut |
 Miter Cut |
Max. Cutting | Max. Miter Cut Angle | Max. Bevel Cut Angle | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Manufacturer Model No. | Current | For Blade Dia. | For Arbor Hole Size | No-Load Speed, rpm | Ht. | Wd. | Left Swivel | Right Swivel | Left Tilt | Right Tilt | Wt., lbs. | Specifications Met | Blade Location | Includes | Each | |
DeWalt | |||||||||||||||||
| A | DWS715 | 15 A @ 120 V AC | 12" | 5/8", 1" | 4,000 | 2" | 8" | 50° | 50° | 48° | 3° | 36 | UL Listed | Left Side | One 12" Dia. Carbide-Tooth Blade for Wood (96 Teeth) | 00000000 | 0000000 |
| For Manufacturer | For Manufacturer Model Number | Number of Brushes | Each | |
| DeWalt | DWS715 | 1 | 0000000 | 00000 |
| For Manufacturer | For Manufacturer Model Number | Each | |
| DeWalt | DWS715 | 0000000 | 000000 |
Electric Sliding-Arm Miter Saws
 | Bevel Cut |
Miter Cut |
Make angled cuts in material that’s too wide for a standard miter saw—the arm on these saws slides for added reach. Swivel the head to make miter cuts across the width of your workpiece. For bevel cuts downward through your material, tilt the blade. While primarily used to cross-cut wood, these saws can also handle metal and other materials.
Max. Cutting | Max. Miter Cut Angle | Max. Bevel Cut Angle | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Manufacturer Model No. | Current | For Blade Dia. | For Arbor Hole Size | No-Load Speed, rpm | Ht. | Wd. | Left Swivel | Right Swivel | Left Tilt | Right Tilt | Wt., lbs. | Specifications Met | Blade Location | Includes | Each | |
| DeWalt | DWS780 | 15 A @ 120 V AC | 12" | 5/8", 1" | 3,800 | 2" | 16" | 50° | 60° | 49° | 49° | 56 | UL Listed | Left Side | One 12" Dia. Carbide-Tooth Blade for Wood (60 Teeth) | 0000000 | 0000000 |
Electric Bench-Top Cutoff Saws
Use an abrasive wheel with these saws for general purpose cutting jobs. You can cut steel square structural tubing, aluminum conduit, and other hard materials.
Saws with a quick-release vise adjust easily—just flip a lever then slide the vise jaw open or closed. With a tool-free wheel change, you release the wheel by turning the clamp that holds it in place.
Max. Miter Cut Angle | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Manufacturer Model No. | Current | For Wheel Dia. | For Arbor Hole Size | No-Load Speed, rpm | Max. Cutting Dp. | Left Swivel | Right Swivel | Wt., lbs. | Cord Lg., ft. | Specifications Met | Features | Includes | Each | |
| DeWalt | D28715 | 15 A @ 120 V AC | 14" | 1" | 4,000 | 5" | 45° | 45° | 39 | 6 | CSA Certified | Quick-Release Vise, Tool-Free Wheel Change | One 14" Dia. × 7/64" Thick Aluminum Oxide Cutoff Wheel for Metal | 0000000 | 0000000 |
Electric Bench-Top Chop Saws for Metal
For cooler, cleaner cuts, these saws use a metal blade instead of an abrasive wheel. They slice through metal at low speeds, which means less dust, fewer sparks, and burr-free edges. Often used to cut steel pipe or strut channel down to size, they deliver precise, perpendicular cuts. The vise secures and releases material quickly—unlike standard vises, its jaws open and close without multiple turns of the handle.
Max. Cutting | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Manufacturer Model No. | Current | For Blade Dia. | For Arbor Hole Size | No-Load Speed, rpm | Ht. | Wd. | Max. Miter Cut Angle (Swivel Direction) | Wt., lbs. | Specifications Met | Blade Location | Includes | Features | Each | ||
| A | DeWalt | DW872 | 15 A @ 120 V AC | 14" | 1" | 1,300 | 4 1/2" | 6 1/2" | 45° (Left) | 47 | UL Listed, C-UL Listed | Right Side | One 14" Dia. Carbide-Tipped Steel Blade for Metal (66 Teeth) | Quick-Release Vise | 0000000 | 0000000 |