Without a shelf, these tables provide room to pull up a stool or chair. The durable steel top won't warp or splinter.

A lower shelf provides additional storage space. Often used in laboratories, these tables stand up to repeated washdowns and resist damage from grease and chemicals.

The wood top on these tables is nonconductive, resists impact, and can be sanded and refinished.

Also known as balance tables, these marble tables provide superior vibration control for sensitive measuring equipment.

With a thick steel frame and welded construction, these tables have a capacity of at least 10,000 lbs.

With an extra-smooth nonconductive surface, these tables won't trap dirt and oil, making them easy to clean. They are often used as printer stands.

Often used in laboratories, these tables stand up to repeated washdowns and won't corrode from grease and chemicals. Use them to elevate machinery and equipment up to 24" from the floor.

With a flatness tolerance of 0.002" per foot, these 24" high tables provide an accurate reference surface for layout and inspection work. They have a thick steel frame and welded construction to support 35,000 lbs.

These durable tables won't warp or splinter. They can be configured at a custom height.

Often used in laboratories and food-processing areas, these tables withstand repeated washdowns and resist damage from grease and chemicals. They can be configured for either seated or standing tasks.

With a thick steel frame and a capacity of at least 10,500 lbs., these welded tables are our strongest and most durable adjustable-height tables. They can be configured for either seated or standing tasks.

Turn the crank to adjust the height of these tables without clearing off the top or loosening leg bolts. They can be configured for either seated or standing tasks.

Fold these lightweight tables in half and use the handle to carry them with one hand.

Store and transport multiple folding tables.

Build a picnic table with your own wood top and benches.

Replace a table leg or make a table with your own tabletop.

Pull metal particles from grinding, cutting, and finishing workpieces out of the air to avoid breathing them and creating sparks in your work area.

Solid pieces of wood are glued together to ensure durability.

A corrosion-resistant, stainless steel surface and sealed, plastic laminate bottom make these tops suitable for food service.

These heavy duty tops have a durable, powder-coated finish.

All legs have knockouts in the front and back to accept duplex electrical outlets.

These corrosion-resistant legs are often used in food-processing plants and laboratories.

Use two legs to hold up to 4,000 lbs. Adjust height in 1 1/2" increments with rivets that slide into keyhole slots.

Use two legs for a capacity of 6,000 lbs. Remove and reposition the bolts to adjust height in 1" increments.

Adjust the height of a workbench without clearing off the top or loosening leg bolts.

Start with the workbench and then customize the interior by adding drawers and shelves.

For added security, drawers are concealed behind padlockable doors.

Tilt back these workbenches to roll them anywhere. Open the lid to use it as a work surface.

These workbenches are dent and rust resistant.

Reinforced for strength and durability, these workbenches can hold twice the weight of our standard large-capacity cabinet workbenches.

Fold the legs and use the handle to carry these workbenches with one hand.

To keep work from falling off the top, these workbenches have a backstop and side stops.

These workbenches have plastic frames that won't rust or dent.

Often used in laboratories and food-processing facilities, these shelves resist corrosion.

Position these shelves at any angle.

Transform a fixed-height workbench into an adjustable-height workbench with one of these kits.

Keep tools visible and organized above a workbench.

Not only do these mats prolong the life of a workbench top, they also protect tools and parts by cushioning them when they fall.

The work surface is positioned at a comfortable height for writing and working while standing.

Mix and match components to design an office work area that can be reconfigured as needed.

Change any desk or table into a stand-up-height work surface.

Adjust both the slope and height of the top to a comfortable position for drawing, drafting, and writing.

With their compact size, these sawhorses are easy to store and transport.

These tables have a foot lever and hydraulic pump to raise loads and either a hand valve or hand lever for controlled lowering.

An extra-long, reinforced tabletop gives you plenty of room for oversized loads.

Turn the hand wheels to raise the load and tilt it up to 30° for a more ergonomic angle.

An electric motor and a hydraulic pump lift loads with the push of a button.

An extra-large tabletop provides plenty of room for oversized loads.

The tabletop can go as low as 3", making loading and unloading from the floor and pallets easier.

Choose your table based on capacity, then choose the type of control that best suit your application.

Use one to three springs (included) to automatically keep pallets at a convenient height.

Add components such as clamps, brackets, stops, rests, mounting plates, fixturing squares, risers, and V-blocks to build fixtures for welding and assembly.

Foldable for transport and storage, use these tables as a sturdy work surface for welding, assembly, cutting, and other tasks around your facility.

Precision ground to the tightest parallel tolerance, these steel plates have threaded and unthreaded holes in a grid pattern to support precise positioning and repeatability when machining.

Rotate work 360° and precisely position it on X- and Y-axes by turning the handles.

Position parts exactly where they’re needed for workers, robots, and other machines to easily access them.

The base fits into round or square holes on most workholding tables for clamping anywhere on the work surface.

Also known as sleeve-bearing turntables or slewing-ring bearings.

Lock into one of four positions. To unlock, pull the ring on the spring-loaded locking pin.

Built-in detents slow or stop the rotation of the turntable at specified intervals for repeatable positioning.

Raise and lower your robot arm on these workstations, placing them at the right height for each task.

Organize all your 3D printing tools and supplies in one mobile workstation.

Ball transfers allow movement in any direction so you can turn material without lifting it.

Rollers support and help guide material into machinery.

Place stands on a work surface to position pipe while machining.

Also known as ball-bearing parallels, these plates have multidirectional balls that project from the top and bottom to position and move small, heavy items over short distances.

Simplify tasks such as spray painting, repair work, and inspection. These turntables rotate to expose every side of an object while working.

Often used in displays, these turntables have a motor for continuous rotation.

Keep your heaviest tools and parts in a single cabinet, or stack them for more storage.

Two micrometer handles ensure accurate, repeatable positioning along two axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

A micrometer handle ensures accurate, repeatable positioning along a single axis—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Three micrometer handles ensure accurate, repeatable positioning along three axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

A linear scale and micrometer-like hand wheel measure travel distance in increments of 0.001".