Filter by
System of Measurement
Capacity
For Use With
Maximum Pressure
Port Size
Mounting Position
Maximum Temperature
Height
Mounting Plate
Shape
DFARS Specialty Metals
ASME-Code Compressed Air Storage Tanks
 |  |
Horizontal | Horizontal with Mounting Plate |
 | |
Vertical |
These tanks have drain ports on the bottom to remove condensation. All other ports can be used as inlets or outlets in any configuration.
Steel tanks are primed or powder coated for exterior corrosion resistance.
Note: Per ASME code, all tanks are water tested. Those made without a corrosion-resistant coating or material will have rust on the interior.
With Mounting Plate—Tanks with mounting plate have a platform where you can secure motors, pumps, and other components.
Epoxy Liner—Epoxy-lined steel tanks also resist interior corrosion that can result from moisture in your compressed air.
316 Stainless Steel—Stainless steel tanks are more corrosion resistant than steel tanks.
Cannot Be Sold To—Safety regulations restrict sales to the listed jurisdictions/areas.
Ports | Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., gal. | Max. Pressure, psi | Total No. of | Gender | Sizes | Lg. | Dia. | Ht. | Wall Thk. | Temp. Range, ° F | Certification | Includes | Cannot Be Sold To | Each | |||
Horizontal without Mounting Plate | ||||||||||||||||
Epoxy-Lined Powder-Coated Steel | ||||||||||||||||
| 2 | 200 | 7 | Female | 1/2 NPT Port (1 Ea.) 3/4 NPT Port (4 Ea.) 1 1/2 NPT Port (1 Ea.) 1/2 NPT Drain Port (1 Ea.) | 11 3/4" | 8" | 10" | 1/8" | -20 to 400 | ASME BPVC.VIII.1 | Plugs | — | 9908K11 | 0000000 | ||
316 Stainless Steel | ||||||||||||||||
| 2 | 200 | 7 | Female | 1/2 NPT Port (1 Ea.) 3/4 NPT Port (4 Ea.) 1 NPT Port (1 Ea.) 1/2 NPT Drain Port (1 Ea.) | 12 3/4" | 8" | 10" | 1/8" | -20 to 450 | ASME BPVC.VIII.1 | Plugs | Canada | 9934K31 | 00000000 | ||
Horizontal with Mounting Plate | ||||||||||||||||
Primed Steel | ||||||||||||||||
| 2 | 200 | 5 | Female | 3/4 NPT Port (3 Ea.) 1 NPT Port (1 Ea.) 1/2 NPT Drain Port (1 Ea.) | 11 3/4" | 8" | 11" | 1/8" | -20 to 400 | ASME BPVC.VIII.1 | Plugs | — | 9888K42 | 000000 | ||
Epoxy-Lined Powder-Coated Steel | ||||||||||||||||
| 2 | 200 | 5 | Female | 3/4 NPT Port (3 Ea.) 1 NPT Port (1 Ea.) 1/2 NPT Drain Port (1 Ea.) | 11 3/4" | 8" | 11" | 1/8" | -20 to 400 | ASME BPVC.VIII.1 | Plugs | — | 9908K32 | 000000 | ||
Vertical without Mounting Plate | ||||||||||||||||
Powder-Coated Steel | ||||||||||||||||
| 2 | 200 | 5 | Female | 1/2 NPT Port (1 Ea.) 3/4 NPT Port (2 Ea.) 1 NPT Port (1 Ea.) 3/4 NPT Drain Port (1 Ea.) | — | 8" | 13 1/2" | 1/8" | -20 to 400 | ASME BPVC.VIII.1 | Plugs | — | 1584K12 | 000000 | ||
Lightweight Compressed Air Storage Tanks
 |
Tanks have drain ports on the bottom to remove condensation. All other ports can be used as inlets or outlets in any configuration.
Cannot Be Sold to Canada and Cannot Be Sold to New Jersey—They cannot be sold to New Jersey or Canada due to safety and pressure vessel regulations.
Ports | Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., gal. | Max. Pressure, psi | Total No. of | Gender | Sizes | Lg. | Dia. | Ht. | Wall Thk. | Temp. Range, ° F | Cannot Be Sold To | Each | |||
Horizontal without Mounting Plate | ||||||||||||||
Fiberglass | ||||||||||||||
| 2 | 150 | 4 | Female | 1/4 NPT Port (1 Ea.) 3/4 NPT Port (2 Ea.) 1/8 NPT Drain Port (1 Ea.) | 18" | 6 1/4" | 9" | 1/8" | -20 to 150 | Canada, New Jersey | 9827K5 | 0000000 | ||
Hydraulic Tanks
 |  |
Style A | Style B |
Store fluids for a hydraulic power unit or circulating-oil system. Choose a tank capacity about three times greater than your requirement to allow for heat dissipation. Tanks with only a drain connection require you to drill your own inlet/outlet connection and add pipe suction flanges (sold separately). Flanges seal pipes that pass through the top plate of your tank.
Overall | Drain | Inlet/Outlet | Mounting | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Cap., gal. | Lg. | Wd. | Ht. | Pipe Size | Dash Size | No. of Ports | Pipe Size | Dash Size | No. of Ports | Fasteners Included | No. of Holes | Hole Dia. | Max. Temp., ° F | Each | |||
Steel | ||||||||||||||||||
Single Chamber Tanks | ||||||||||||||||||
| A | 2 | 10" | 7 1/2" | 12 1/4" | 1/2 NPT | 08 | 1 | 1/2 NPT | 08 | 1 | No | 4 | 11/32" | 250 | 1149K14 | 0000000 | ||
| B | 2 | 10 1/8" | 10 1/8" | 9 1/8" | 1/2 NPT | 08 | 1 | — | — | — | No | 4 | 7/16" | 212 | 62945K11 | 000000 | ||
 |
Mounting Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For Pipe Size | For Cutout Dia. | Material | Mounting Fasteners Included | Ctr.-to-Ctr. | Lg | Wd. | Includes | Each | ||
| 1/2 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 62875K21 | 000000 | |
| 3/4 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 62875K22 | 00000 | |
| 1 1/4 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 62875K23 | 00000 | |
| 1 1/2 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 62875K24 | 00000 | |
| 2 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 62875K25 | 00000 | |
 |
Flange Mount |
Breather vents prevent excess pressure in tanks and allow a free flow of air.
Material | Strainer | Mounting Hole | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Cutout Dia. | Cap | Strainer | Gasket | Removes Particle Size Down To, μm | Cap Dia. | Flange Dia. | Dia | Ht. | Mounting Fasteners Included | Lg. | Wd. | Bolt Circle Dia. | Mount Type | Each | ||
| 2 1/8" | Zinc-Plated Steel | Plastic | Rubber | 40 | 3" | 3 1/4" | 1 7/8" | 3 13/16" | Yes | 1/4" | 3/16" | 2 7/8" | Flange | 62875K13 | 000000 | |
 |
Aluminum |
Thread | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Gender | Connection Ctr.-to-Ctr. | Overall Ht. | Window Ht. | Body Wd. | For Max. Tank Wall Thk. | Max. Pressure @ Temp. | Temp. Range, ° F | Material | Fitting Material | Window Material | Includes | Each | ||
| 1/2"-20 | UNF | Male | 5" | 6 5/8" | 3 1/2" | 7/8" | 3/4" | 290 psi @ 70° F | -40 to 250 | Aluminum | Aluminum | Glass | Mounting Nuts | 1106K85 | 000000 | |
 |
Nylon With Steel Guard |
For Hole | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | No. of Holes | Connection Ctr.-to-Ctr. | Overall Ht. | Window Ht. | Body Wd. | For Max. Tank Wall Thk. | Max. Pressure @ Temp. | Temp. Range, ° F | Thermometer Temp. Measurement Range, ° F | Material | Guard Material | Window Material | Each | ||
| 1/2" | 2 | 5" | 6 3/8" | 3 7/8" | 13/16" | 1/2" | 50 psi @ 70° F | -40 to 210 | 0 to 220 | Nylon | Steel | Nylon | 4748K29 | 000000 | |
Rectangular Plastic Batch Tanks
 |
These batch cans come with loose fitting dust covers to protect contents from dust and debris.
Bottom Inside | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., gal. | Wd. | Dp. | Ht. | Wd. | Dp. | Thk. | Color | Clarity | Lid Type | Max. Temp., ° F | Space Saving Features | Features | Includes | Each | |||
Polyethylene | |||||||||||||||||
| 2 | 10 1/4" | 10 1/4" | 9 1/4" | 7 3/4" | 7 3/4" | 3/16" | White | Semi-Clear | Loose Fitting | 140 | Stackable | Seamless | Lid | 3754K81 | 000000 | ||
High-Pressure ASME-Code Compressed Air Storage Tanks
 |
Horizontal |
Tanks have drain ports on the bottom to remove condensation. All other ports can be used as inlets or outlets in any configuration.
Note: Per ASME code, all tanks are water tested and will have rust on the interior.
Primed Steel—These tanks are made of steel that's primed to resist exterior corrosion.
600 psi Maximum Pressure—Able to withstand pressures up to 600 psi, these tanks store compressed air for use in high-pressure applications.
Cannot Be Sold To—Safety regulations restrict sales to the listed jurisdictions/areas.
Ports | Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., gal. | Max. Pressure, psi | Total No. of | Gender | Sizes | Lg. | Dia. | Ht. | Wall Thk. | Temp. Range, ° F | Certification | Includes | Cannot Be Sold To | Each | |||
Horizontal without Mounting Plate | ||||||||||||||||
Gray Primed Steel | ||||||||||||||||
| 2 | 600 | 5 | Female | 3/4 NPT Port (3 Ea.) 1 NPT Port (1 Ea.) 1/2 NPT Drain Port (1 Ea.) | 12 1/4" | 8" | 10" | 1/8" | -20 to 400 | ASME BPVC.VIII.1 | Plugs | Canada | 1481K12 | 000000000 | ||
High-Temperature Rectangular Plastic Batch Tanks
 |
Bottom Inside | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., gal. | Wd. | Dp. | Ht. | Wd. | Dp. | Thk. | Color | Clarity | Lid Type | Max. Temp., ° F | Space Saving Features | Features | Includes | Each | |||
Polypropylene | |||||||||||||||||
| 2 | 10 3/4" | 10 3/4" | 9 1/4" | 8" | 8" | 3/16" | White | Semi-Clear | Loose Fitting | 220 | Stackable | Seamless | Lid | 3726K51 | 0000000 | ||
Pressurized Liquid Dispensing Tanks
 |
Attach a compressed air source to pressurize liquids for dispensing and spraying. Tanks have a dip tube that draws liquid from the bottom of the tank. All tanks meet the ASME rating for pressure vessels.
304 Stainless Steel—304 stainless steel tanks have good corrosion resistance.
316 Stainless Steel—316 stainless steel tanks have excellent corrosion resistance.
Cannot Be Sold to Canada—Tanks that cannot be sold to Canada are restricted due to safety regulations.
Tanks | Lids | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Opening | Gauge Port | Temp., ° F | ||||||||||||||||
Cap., gal. | Max. Pressure @ 100° F, psi | Dia. | Ht. | Lg. | Wd. | Pipe Size | Thread Type | Gender | No. of | Min. | Max. | Certification | Cannot Be Sold To | Each | Each | ||||
Tanks Without Mounting Plate | |||||||||||||||||||
304 Stainless Steel | |||||||||||||||||||
| 2 | 142 | 9" | 12" | 4 7/8" | 5 7/8" | 1/4 | NPT | Female | 4 | -20 | 200 | ASME BPVC.VIII.1 | Canada | 41665K19 | 0000000 | 4355T32 | 0000000 | ||
| 2 | 205 | 9" | 11 1/2" | 3 1/4" | 3 7/8" | 1/4 | NPT | Female | 4 | -20 | 200 | ASME BPVC.VIII.1 | Canada | 41705K41 | 000000 | 4355T31 | 00000 | ||
316 Stainless Steel | |||||||||||||||||||
| 2 | 132 | 9" | 12" | 4 7/8" | 5 7/8" | 1/4 | NPT | Female | 4 | -20 | 300 | ASME BPVC.VIII.1 | Canada | 41665K29 | 000000 | 4355T32 | 000000 | ||
| 2 | 185 | 9" | 12" | 3 1/4" | 3 7/8" | 1/4 | NPT | Female | 4 | -20 | 300 | ASME BPVC.VIII.1 | Canada | 6778K19 | 000000 | 4355T31 | 00000 | ||
Sediment Traps
 |  |
Removable Basket |
Prevent drain blockage—these traps have a reusable basket to catch debris, such as metal chips and stones, before it enters your sewage system. For quick disposal, unthread the thumb screws by hand to access and remove the reusable basket. When the tank is closed, a gasket seals in odors.
Install these traps under your sink as a P-trap replacement. The tank and basket are made of polypropylene, so they resist acids and other chemicals.
Cap., gal. | Inlet Pipe Size | Inlet Ht. | Outlet Pipe Size | Outlet Ht. | Ht. | Wd. | Dp. | Gasket Material | Max. Temp., ° F | Features | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Threaded NPT Male Inlet and Outlet | ||||||||||||||
Polypropylene | ||||||||||||||
| 2 | 1 1/2 | 8" | 1 1/2 | 8" | 11 1/4" | 8" | 8" | Buna-N | 230 | Removable Basket, Clamps with Thumbscrews | 6371N11 | 0000000 | ||
Carboys
Mist Coolant Dispensers with Reservoir
 |
Style G |
These dispensers have a reservoir and controls for coolant flow. Designed to cool short and intermittent machine cycles, misting dispensers dissipate heat more efficiently than droplet dispensers, while using considerably less fluid than flood dispensers.
Coolant Outlet | Nozzle | Reservoir | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Cap., gal. | Flow Rate @ Pressure | Max. Pressure, psi | No. of | Hose Lg., ft. | Hose Material | Lg. | Type | Material | Overall Ht. | Wd. | Dp. | Reservoir Material | For Max. SSU Viscosity Grade, SSU | Air Inlet Pressure, psi | Each | |||
For Use With Coolant, Water, and Cutting Oil | |||||||||||||||||||
| G | 2 | Not Rated | 120 | 1 | 4 | Polyethylene | 3" | Rigid | PVC | 10" | 10" | 6" | Steel | 30 | 30 to 125 | 1199K1 | 0000000 | ||
| G | 2 | Not Rated | 120 | 2 | 4 | Polyethylene | 3" | Rigid | PVC | 10" | 10" | 6" | Steel | 30 | 30 to 125 | 1199K2 | 000000 | ||
| G | 2 | Not Rated | 120 | 4 | 4 | Polyethylene | 3" | Rigid | PVC | 10" | 10" | 6" | Steel | 30 | 30 to 125 | 1199K4 | 000000 | ||
Food and Beverage Round Metal Batch Tanks
Carboys with Faucet
 |
Style D |
Open the faucet for easy dispensing.
Air-Powered Oil Dispensers
 |
Connect these dispensers to your air system to pressurize the oil in the reservoir and atomize the spray. Dual regulators allow you to adjust the pressure of the oil and the atomized spray. Add a spray valve (sold separately) to direct the flow of oil. A removable filter prevents valve blockage. They have NPTF (Dryseal) threads, which are compatible with NPT threads.
Overall | Air Inlet | Air Outlet | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., gal. | Max. Oil Outlet Pressure, psi | Ht. | Wd. | Dp. | Max. Air Inlet Pressure, psi | Thread Type | Pipe Size | Gender | Thread Type | Pipe Size | Gender | Temp. Range, ° F | Mounting Hole Thread Size | For Max. ISO Viscosity Grade | Each | |||
1/8 NPTF Female Oil Outlet | ||||||||||||||||||
| 2 | 30 | 32 1/4" | 5 13/16" | 5 13/16" | 125 | NPTF | 1/4 | Female | NPTF | 1/8 | Female | -30 to 140 | 5/16"-24 | 150 | 12745K56 | 000000000 | ||
Fuel Cans
 |  |
Style A | Replacement Spouts |
Carry and store petroleum-based liquids in these sturdy cans. Color-coding indicates usage: red for gasoline, yellow for diesel, and blue for kerosene. The spout automatically closes to prevent spills. Push the button to pour.
Vacuum Degassing Chambers
 |  |
Aluminum with Top-Mount Gauge | Aluminum with Side-Mount Gauge |
Also known as vacuum degassing chambers, these remove trapped air from mixtures such as paint and mold resins. The fittings on the hose contain a gasket that allows you to connect the hose to flared fittings.
Aluminum—Aluminum chambers are lightweight, corrosion resistant, and good for general use.
Side-Mount Gauge—Chambers with a side-mount gauge allow you to see the material inside of them when looking from the top.
Acrylic Plastic Lid—Acrylic lids are more durable than glass lids. They’re commonly used to eliminate air bubbles in hard setting materials, such as silicone and polyurethane.
Glass Lid—Glass lids resist corrosion. They’re primarily used to eliminate air bubbles in woodworking projects that use harsh chemicals, which would deteriorate plastic lids. Glass lids are less durable than acrylic lids.
Replacement Lids—Replacement lids do not include hardware or seal.
Chambers | Replacement Lids | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Gauge | Hose | |||||||||||||||||||
Cap., gal. | Dia. | Ht. | Bottom ID | Vacuum Range, in. Hg | Accuracy | Graduations, in. Hg | Lg., ft. | Thread Size | Gender | For Fitting Connection | For Tube OD | Max. Temp., ° F | Removes Particle Size Down To, μm | Includes | Each | Each | ||||
Aluminum with Top-Mount Gauge | ||||||||||||||||||||
Acrylic Plastic Lid with Silicone Rubber Seal | ||||||||||||||||||||
| 2 | 10 3/4" | 7 1/2" | 10" | 0 to 30 | ±5% | 0.5 | 5 | 7/16"-20 UNF | Female | 37° Flared, 45° Flared | 1/4" | 150 | 50 | 50 Micron Air Filter, Lid | 1931N14 | 0000000 | 1931N49 | 0000000 | ||
Aluminum with Side-Mount Gauge | ||||||||||||||||||||
Glass Lid with Silicone Rubber Seal | ||||||||||||||||||||
| 2 | 10 3/4" | 7 1/2" | 10" | 0 to 30 | ±5% | 0.5 | 5 | 7/16"-20 UNF | Female | 37° Flared, 45° Flared | 1/4" | 150 | 50 | 50 Micron Air Filter, Lid | 1931N13 | 000000 | 1931N42 | 00000 | ||
Acrylic Plastic Lid with Silicone Rubber Seal | ||||||||||||||||||||
| 2 | 10 3/4" | 7 1/2" | 10" | 0 to 30 | ±5% | 0.5 | 5 | 7/16"-20 UNF | Female | 37° Flared, 45° Flared | 1/4" | 150 | 50 | 50 Micron Air Filter, Lid | 1931N15 | 000000 | 1931N51 | 00000 | ||
Metal Hand-Pump Sprayers
 |  |
Style A | Style B |
Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. These sprayers are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.
Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.
Style A—Style A sprayers have a trigger that locks for continuous spray.They also have a filter in the tank to prevent clogs.
Style B—Style B sprayers have a trigger that locks for continuous spray.
Sprayers | Repair Kits | Replacement Trigger and Wand Kits | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Cap., gal. | Dia. | Ht. | Tank Material | Seal Material | Wand Material | Nozzle Material | Color | Hose Lg. | Wand Lg. | Fill Opening Dia. | Features | Each | Each | Each | |||||
Mist/Stream Dispensing | ||||||||||||||||||||
| A | 2 | 8" | 18" | Epoxy-Coated Steel | Viton® Fluoroelastomer | Brass | Brass | Blue | 42" | 12" | 3" | Continuous Spray, Filter | 7558T52 | 0000000 | 7558T55 | 000000 | 7558T53 | 000000 | ||
Cone/Flat/Stream Dispensing | ||||||||||||||||||||
| B | 2 | 8" | 17 1/2" | Stainless Steel | Viton® Fluoroelastomer | Brass | Polypropylene | — | 40" | 12" | 5 1/4" | Continuous Spray | 7529T32 | 000000 | 7529T12 | 00000 | 7529T63 | 00000 | ||
Parts Washing Cans
 |
Cap., gal. | OD | Overall Ht. | Material | Certification | Each | |||
|---|---|---|---|---|---|---|---|---|
For Solvent-Based Solutions | ||||||||
| 2 | 9 1/2" | 10" | Steel | FM Approved, UL Listed | 3397K15 | 0000000 | ||
Safety Cans for Flammable Liquids Disposal
Plastic
Parts Washing Cans with Removable Basket
 |
Easily insert and remove parts from these cans. Good for small cleaning jobs, they save space and solution. A fusible link closes the cover in the event of a fire.
Basket | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., gal. | OD | Overall Ht. | Material | Certification | Includes | OD | Ht. | Mesh Opening Dia. | Material | Each | |||
For Solvent-Based Solutions | |||||||||||||
| 2 | 11 1/2" | 11 1/2" | Steel | FM Approved, UL Listed | Basket | 10 1/2" | 4 1/2" | 0.094" | Steel | 3397K23 | 0000000 | ||
Safety Cans with Built-In Spout
 |
Style C |
Also known as Type II safety cans, these have two openings—one for filling, one for pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; flame arrester; and a vacuum-release valve for controlled pouring.
Polyethylene
|  |
Style C | Replacement Caps |
Style C—Style C have a rotating spout that flips down for pouring and up for storage.
Color—Color-coding typically indicates usage: red for gasoline, yellow for diesel, blue for kerosene, and green for other liquids.
Easy-Drain Parts Washing Cans
 |
Drain Plate | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Cap., gal. | OD | Overall Ht. | Dia. | Material | Material | Certification | Each | |||
For Solvent-Based Solutions | ||||||||||
| 2 | 11 1/2" | 6" | 9 3/4" | Steel | Steel | FM Approved | 3406K7 | 0000000 | ||
Electric Melting Pots
Round
 |
Overall | Electrical | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., gal. | Temp. Setting, ° F | ID | Inside Ht. | Dia. | Ht. | Material | Wattage, W | Electrical Connection Type | Connection | No. of Blades | NEMA Type | Cord Lg., ft. | Each | |||
Adjustable Temperature Setting—120V AC | ||||||||||||||||
| 2 | 150 to 900 | 9 3/4" | 6" | 15 1/2" | 11 1/4" | Iron | 1,800 | Plug In | Straight Blade | 3 | 5-15 | 6 | 3245K16 | 000000000 | ||
Safety Cans
 |
Style C |
Also known as Type I safety cans, these have a single opening for both filling and pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; and a flame arrester.
Powder-Coated Steel
|  |  |
Style C | Rigid Plastic Pour Spout | Flexible Steel Pour Spout |
Cans | Rigid Plastic Pour Spouts | Flexible Steel Pour Spouts | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Cap., gal. | Dia. | Ht. | Fill Opening Dia. | Certification | Flammability Rating | Choose a Color | Each | Each | Each | ||||
| C | 2 | 9 1/2" | 13 3/4" | 1 5/8" | UL Listed, C-UL Listed, FM Approved | NFPA 30, OSHA Compliant 29 CFR 1910.106 | Red, Yellow, Blue, Green | 4290T151 | 000000 | 4290T36 | 000000 | 4290T35 | 000000 | |
Hand-Pump Foamers
 |
The nozzle on this foamer injects air to make cleaners and disinfectants foam. It can also be used as a sprayer.
Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure that the tank, seal, wand, and nozzle are suitable for your application.
Continuous Spray—The trigger locks for continuous spraying.
Replacement Trigger and Wand Kits—Replacement trigger and wand kits do not include nozzles.
Foamers | Repair Kits | Replacement Trigger and Wand Kits | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., gal. | Dia. | Ht. | Tank Material | Seal Material | Wand Material | Nozzle Material | Color | Hose Lg. | Wand Lg. | Fill Opening Dia. | Graduations | Features | Includes | Each | Each | Each | |||||
Cone/Flat/Foam/Stream Dispensing | |||||||||||||||||||||
| 2 | 9" | 20 1/2" | Polyethylene | Viton® Fluoroelastomer | Stainless Steel | Polypropylene | Semi-Clear White | 50" | 21" | 2" | 1/2 gal. 2 L | Continuous Spray, Pressure-Relief Valve, Wand Holder | Four Spray Nozzles, One Foam Nozzle, Shoulder Strap | 1356N11 | 000000 | 1356N22 | 000000 | 1356N21 | 000000 | ||
Plastic Hand-Pump Sprayers
 |  |
Style A | Style B |
 |  |
Style C | Style F |
Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. Made of lightweight plastic, the tank on these sprayers resists chemicals and impact. They’re often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.
Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.
Warning: Face the nozzle away from you to safely release pressure from the relief valve. If there’s no relief valve, place the tank on its side with the top pointed away from you before you release.
Cone Dispensing—Sprayers with a cone nozzle are good for everyday cleaning.
Flat Dispensing—The flat nozzle is useful for creating powerful coverage over a wide area.
Mist Dispensing—To clean delicate equipment or cool machinery, use the mist nozzle.
Stream Dispensing—Remove stuck-on material with the stream nozzle.
Viton® Fluoroelastomer Seal—Viton® fluoroelastomer seals are chemical resistant, so you can spray oils, acids, and solvents without damaging the seal.
Polypropylene—Polypropylene wands resist most chemicals. They are lighter than stainless steel but are less durable.
Stainless Steel—Stainless steel wands resist most chemicals.
Aluminum—Aluminum wands are durable but can corrode when exposed to strong chemicals.
Internal Pressure Regulator—Sprayers with an internal pressure regulator keep pressure at or below 55 psi.
Pressure-Relief Valve—Sprayers with a pressure-relief valve let you release the air inside safely without being sprayed.
Repair Kits—Add a repair kit to replace worn or damaged components, such as the check valve or O-rings.
Sprayers | Repair Kits | Replacement Trigger and Wand Kits | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Cap., gal. | Dia. | Ht. | Tank Material | Seal Material | Wand Material | Color | Hose Lg. | Wand Lg. | Fill Opening Dia. | Graduations | Features | Includes | Each | Each | Each | |||||
Cone/Stream Dispensing | |||||||||||||||||||||
| A | 2 | 7" | 19" | Polyethylene | Buna-N | Polypropylene | White | 40" | 12" | 4 1/2" | 1/2 gal. 1 gal. 1 1/2 gal. 2 L 4 L 6 L | Continuous Spray, Internal Pressure Regulator, Reinforced Hose | Shoulder Strap | 6878N321 | 000000 | 6878N317 | 000000 | 6878N912 | 000000 | ||
| A | 2 | 8 1/2" | 21" | Polyethylene | Buna-N | Aluminum | White | 36" | 18" | 2" | 1/2 gal. 1 gal. 1 L | Continuous Spray, Reinforced Hose | — | 6878N348 | 00000 | 6878N343 | 0000 | 6878N917 | 0000 | ||
Mist/Stream Dispensing | |||||||||||||||||||||
| B | 2 | 8 11/16" | 18 3/4" | Polyethylene | Buna-N | Polypropylene | White | 36" | 14" | 1 3/4" | — | Continuous Spray, Filter, Pressure-Relief Valve, Reinforced Hose | — | 6878N331 | 00000 | ——— | 0 | ——— | 0 | ||
Cone/Flat/Stream Dispensing | |||||||||||||||||||||
| C | 2 | 8 5/8" | 17 3/8" | Polyethylene | Viton® Fluoroelastomer | Polypropylene | White | 50" | 18" | 2" | — | Continuous Spray, Pressure-Relief Valve | Shoulder Strap | 7095T42 | 00000 | 7095T91 | 00000 | 1356N21 | 00000 | ||
Cone/Mist/Stream Dispensing | |||||||||||||||||||||
| C | 2 | 8 5/8" | 17 3/8" | Polyethylene | Viton® Fluoroelastomer | Stainless Steel | White | 50" | 21" | 2" | 1/2 gal. 1 gal. 1 L | Continuous Spray, Filter, Pressure-Relief Valve | Shoulder Strap | 6878N345 | 00000 | 6878N344 | 00000 | 6878N919 | 00000 | ||
| F | 2 | 8 1/8" | 22 7/8" | Polyethylene | Buna-N | Polypropylene | White | 34" | 18" | 3" | 1/2 gal. 2 L | Continuous Spray, Extended Handle, Filter, Pressure-Relief Valve, Reinforced Hose, Wand Holder | — | 6878N18 | 00000 | 6878N101 | 00000 | 6878N103 | 00000 | ||
Flat/Mist/Stream Dispensing | |||||||||||||||||||||
| C | 2 | 8 1/2" | 21" | Polyethylene | Viton® Fluoroelastomer | Polypropylene | White | 50" | 21" | 2" | — | Carrying Handle, Continuous Spray, Filter, Pressure-Relief Valve, Reinforced Hose | Shoulder Strap | 6878N326 | 00000 | ——— | 0 | ——— | 0 | ||
Heavy Duty Plastic Hand-Pump Sprayers
 |
These sprayers have a more durable construction than our other plastic hand-pump sprayers. They have a large fill opening for easy filling and cleaning. Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. They are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides. They have a trigger that can be locked for continuous spray.
Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.
Replacement Trigger and Wand Kits—Replacement trigger and wand kits do not include nozzles.
