Remove sticky excess resin from 3D-printed parts hands-free. Just fill these washers with isopropyl alcohol or another solvent and choose your resin’s wash time. In minutes, your parts will be clean. No need for time-consuming hand washing—an impeller automatically churns the solvent to get resin out of shallow holes and internal channels on your parts. Once washing is done, air- or fan-dry before curing.

If your parts were printed with a Formlabs printer, you don’t have to remove your parts from the build platform. Slot the full platform into these washers, and you’re ready to go. To prevent your parts from warping, they’ll automatically lift the platform out of the solvent once washing stops.

Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. These sprayers are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.

Easily insert and remove parts from these cans. Good for small cleaning jobs, they save space and solution. A fusible link closes the cover in the event of a fire.